Re: [PATCH 6/6] Input: elantech - add v3 hardware support

[Wanlong Gao]

On 08/18/2011 10:25 PM, Seth Forshee wrote:
> On Thu, Aug 18, 2011 at 08:58:53AM -0500, Seth Forshee wrote:
> > The case 3 code is nearly identical to case 2. How about this?
> >
> > 	case 2:
> > 		__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
> > 		/* fall through */
> >
> > 	case 3:
> > 		input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
> > 		input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
> > 		/* range of pressure and width is the same as v2 */
> > 		input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
> > 				     ETP_PMAX_V2, 0, 0);
> > 		input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
> > 				     ETP_WMAX_V2, 0, 0);
> > 		__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
> > 		input_mt_init_slots(dev, 2);
> > 		input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
> > 		input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
> > 		break;
>
> Sorry, that should have been:
>
> 	case 2:
> 		__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
> 		/* fall through */
>
> 	case 3:
> 		input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
> 		input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
> 		if (etd->reports_pressure) {
> 			input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
> 					     ETP_PMAX_V2, 0, 0);
> 			input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
> 					     ETP_WMAX_V2, 0, 0);
> 		}
> 		__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
> 		input_mt_init_slots(dev, 2);
> 		input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
> 		input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
> 		break;

simplify, seems good.

Thanks
-Wanlong Gao
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/