Re: Broken pci_block_user_cfg_access interface

[Jan Kiszka]

On 2011-08-25 15:02, Brian King wrote:
> On 08/25/2011 04:19 AM, Jan Kiszka wrote:
>> On 2011-08-24 17:02, Brian King wrote:
>>> On 08/24/2011 05:43 AM, Jan Kiszka wrote:
>>>> Hi,
>>>>
>>>> trying to port the generic device interrupt masking pattern of
>>>> uio_pci_generic to KVM's device assignment code, I stumbled over some
>>>> fundamental problem with the current pci_block/unblock_user_cfg_access
>>>> interface: it does not provide any synchronization between blocking
>>>> sides. This allows user space to trigger a kernel BUG, just run two
>>>>
>>>> while true; do echo 1 > /sys/bus/pci/devices/<some-device>/reset; done
>>>>
>>>> loops in parallel and watch the kernel oops.
>>>>
>>>> Instead of some funky open-coded locking mechanism, we would rather need
>>>> a plain mutex across both the user space access (via sysfs) and the
>>>> sections guarded by pci_block/unblock_user_cfg_access so far. But I'm
>>>> not sure which of them already allow sleeping, specifically if the IPR
>>>> driver would be fine with such a change. Can someone in the CC list
>>>> comment on this?
>>>
>>> The ipr driver calls pci_block/unblock_user_cfg_access from interrupt
>>> context, so a mutex won't work.
>>
>> Ugh. What precisely does it have to do with the config space while
>> running inside an IRQ handler (or holding a lock that synchronizes it
>> with such a handler)?
> 
> The ipr driver can get an error interrupt which will trigger the driver
> to reset the adapter. While the adapter is going through reset we need
> to ensure user config accesses are blocked, since many ipr adapters
> won't respond on the PCI bus during this time.

What about offloading the reset to thread context (workqueue etc.)?

> 
> 
>>> API that works best for the ipr driver is to allow for many block calls,
>>> but a single unblock call unblocks access. It seems like what might
>>> work well in the case above is a block count. Each call to pci_block
>>> increments a count. Each pci_unblock decrements the count and only
>>> actually do the unblock if the count drops to zero. It should be reasonably
>>> simple for ipr to use that sort of an API as well.
>>
>> That will just paper over the underlying bug: multiple kernel users (!=
>> sysfs access) fiddle with the config space in an unsynchronized fashion.
>> Think of sysfs-triggered pci_reset_function while your ipr driver does
>> its accesses.
> 
> I took a look at the sysfs triggered pci reset function and don't see any way
> that the controlling device driver ever gets to be involved in this reset.
> If code outside the ipr driver were to reset the adapter, the adapter firmware
> would be left in an uninitialized state and until scsi core starts timing
> out ops and driving EH, the card would be unusable. I can't imagine the
> ipr driver is unique in this.

Right, that's why a PCI core service is needed for coordination.

Jan

-- 
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/