Re: [PATCH v5 7/8] Input: elantech - add v3 hardware support

From: Daniel Kurtz
Date: Mon Sep 05 2011 - 04:40:00 EST

Next message: Tejun Heo: "Re: [PATCHSET cgroup] extend threadgroup locking"
Previous message: naveen yadav: "Re: Kernel crash (2.6.35.13)"
In reply to: JJ Ding: "Re: [PATCH v5 7/8] Input: elantech - add v3 hardware support"
Next in thread: Daniel Kurtz: "Re: [PATCH v5 7/8] Input: elantech - add v3 hardware support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi JJ,

On Mon, Sep 5, 2011 at 3:10 PM, JJ Ding <jj_ding@xxxxxxxxxx> wrote:
> Hi Daniel,
>
> On Mon, 5 Sep 2011 12:35:28 +0800, Daniel Kurtz <djkurtz@xxxxxxxxxxxx> wrote:
>> Hi JJ,
>>
>> On Mon, Sep 5, 2011 at 10:16 AM, JJ Ding <jj_ding@xxxxxxxxxx> wrote:
>> > diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
>> > index 2ae7c49..c4ceefd 100644
>> > --- a/drivers/input/mouse/elantech.c
>> > +++ b/drivers/input/mouse/elantech.c
>> > @@ -108,6 +108,16 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
>> > rc = -1;
>> > }
>> > break;
>> > +
>> > + case 3:
>> > + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
>> > + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
>> > + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
>> > + elantech_ps2_command(psmouse, NULL, reg) ||
>> > + elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
>> > + rc = -1;
>> > + }
>> > + break;
>> > }
>> >
>> > if (rc)
>> > @@ -154,6 +164,18 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg,
>> > rc = -1;
>> > }
>> > break;
>> > +
>> > + case 3:
>> > + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
>> > + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
>> > + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
>> > + elantech_ps2_command(psmouse, NULL, reg) ||
>> > + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
>> > + elantech_ps2_command(psmouse, NULL, val) ||
>> > + elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
>> > + rc = -1;
>> > + }
>> > + break;
>> > }
>> >
>> > if (rc)
>> > @@ -350,6 +372,84 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
>> > input_sync(dev);
>> > }
>> >
>> > +/*
>> > + * Interpret complete data packets and report absolute mode input events for
>> > + * hardware version 3. (12 byte packets for two fingers)
>> > + */
>> > +static void elantech_report_absolute_v3(struct psmouse *psmouse,
>> > + int packet_type)
>> > +{
>> > + struct input_dev *dev = psmouse->dev;
>> > + struct elantech_data *etd = psmouse->private;
>> > + unsigned char *packet = psmouse->packet;
>> > + unsigned int fingers = 0, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
>> > + unsigned int width = 0, pres = 0;
>> > +
>> > + /* byte 0: n1 n0 . . . . R L */
>> > + fingers = (packet[0] & 0xc0) >> 6;
>> > +
>> > + switch (fingers) {
>> > + case 3:
>> > + case 1:
>> > + /*
>> > + * byte 1: . . . . x11 x10 x9 x8
>> > + * byte 2: x7 x6 x5 x4 x4 x2 x1 x0
>> > + */
>> > + x1 = ((packet[1] & 0x0f) << 8) | packet[2];
>> > + /*
>> > + * byte 4: . . . . y11 y10 y9 y8
>> > + * byte 5: y7 y6 y5 y4 y3 y2 y1 y0
>> > + */
>> > + y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
>> > + break;
>> > +
>> > + case 2:
>> > + if (packet_type == PACKET_V3_HEAD) {
>> > + /*
>> > + * byte 1: . . . . ax11 ax10 ax9 ax8
>> > + * byte 2: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
>> > + */
>> > + etd->prev_x = ((packet[1] & 0x0f) << 8) | packet[2];
>> > + /*
>> > + * byte 4: . . . . ay11 ay10 ay9 ay8
>> > + * byte 5: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0
>> > + */
>> > + etd->prev_y = etd->y_max -
>> > + (((packet[4] & 0x0f) << 8) | packet[5]);
>> > + /*
>> > + * wait for next packet
>> > + */
>> > + return;
>> > + }
>> > +
>> > + /* packet_type == PACKET_V3_TAIL */
>> > + x1 = etd->prev_x;
>> > + y1 = etd->prev_y;
>> > + x2 = ((packet[1] & 0x0f) << 8) | packet[2];
>> > + y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
>> > + break;
>> > + }
>> > +
>> > + pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
>> > + width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
>> > +
>> > + input_report_key(dev, BTN_TOUCH, fingers != 0);
>> > + if (fingers != 0) {
>> > + input_report_abs(dev, ABS_X, x1);
>> > + input_report_abs(dev, ABS_Y, y1);
>> > + }
>> > + elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
>>
>> Originally, v3 was using semi-mt, which reported corner coordinates of
>> a box containing at least two of the N touches on the touchpad. I
>> thought this was due to hardware limitation.
>>
>> If the hardware really can report true positions for (up to) 3
>> contacts, then using pure MT-B is a good approach. This driver still
>> seems to mix semi-mt and MT-B together a bit.
>>
>> Can you report all three contacts in their own slots, 0, 1 and 2,
>> instead of just reoprting two of them with 0,1?
>>
>> Also, when reporting the 'legacy single touch' coordinate (ABS_X,
>> ABS_Y), please use:
>> input_mt_report_pointer_emulation(), instead of always reporting the
>> last (x1,y1). Otherwise the single touch point will bounce back and
>> forth between 1st and 3rd touch.
>
> v3 can only track the true positions of two fingers. With 3 finger
> touch, it reports the lowest value of x and the biggest value of y,
> among the three fingers. v3 changed the protocol so it could report
> 2-finger touch data w/o reduced resolution and improved the hardware to
> truly track 2 fingers independently, otherwise it's pretty much the same
> as v2.

If I read this code correctly, it looks like in the 3-finger case,
(x1,y1) as reported in the (ABS_X, ABS_Y), and in the call to
elantech_report_semi_mt_data() will bounce back and forth between the
1st finger and 3rd finger ("lowest value of x and the biggest value of
y"). Won't this be very confusing for userspace (i.e.
xf86-input=synaptics)?

In fact, I'm not sure how "lowest value of x and the biggest value of
y" can be reported to userspace in a useful way at the same time as
two absolute finger positions.

Perhaps just report up to 2 MT-B slots, for the first two fingers, and
only report "3 fingers on the pad" with BTN_TOOL_TRIPLETAP (see the
recent "synaptics image sensor" patchset for a similar
implementation):
https://patchwork.kernel.org/patch/1076142/

Thanks,
-Dan

>
>> > + input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
>> > + input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
>> > + input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
>>
>> Use input_mt_report_pointer_emulation() with use_count = true. This
>> will also report ABS_PRESURE (but not ABS_TOOL_WIDTH, unfortunately).
>>
>> > + input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
>> > + input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
>> > + input_report_abs(dev, ABS_PRESSURE, pres);
>> > + input_report_abs(dev, ABS_TOOL_WIDTH, width);
>> > +
>> > + input_sync(dev);
>> > +}
>> > +
>> > static int elantech_packet_check_v1(struct psmouse *psmouse)
>> > {
>> > struct elantech_data *etd = psmouse->private;
>> > @@ -403,11 +503,37 @@ static int elantech_packet_check_v2(struct psmouse *psmouse)
>> > }
>> >
>> > /*
>> > + * We check the constant bits to determine what packet type we get,
>> > + * so packet checking is mandatory for v3 hardware.
>> > + */
>> > +static int elantech_packet_check_v3(struct psmouse *psmouse)
>> > +{
>> > + const u8 debounce_packet[] = { 0xc4, 0xff, 0xff, 0x02, 0xff, 0xff };
>> > + unsigned char *packet = psmouse->packet;
>> > +
>> > + /*
>> > + * check debounce first, it has the same signature in byte 0
>> > + * and byte 3 as PACKET_V3_HEAD.
>> > + */
>> > + if (!memcmp(packet, debounce_packet, sizeof(debounce_packet)))
>> > + return PACKET_DEBOUNCE;
>> > +
>> > + if ((packet[0] & 0x0c) == 0x04 && (packet[3] & 0xcf) == 0x02)
>> > + return PACKET_V3_HEAD;
>> > +
>> > + if ((packet[0] & 0x0c) == 0x0c && (packet[3] & 0xce) == 0x0c)
>> > + return PACKET_V3_TAIL;
>> > +
>> > + return PACKET_UNKNOWN;
>> > +}
>> > +
>> > +/*
>> > * Process byte stream from mouse and handle complete packets
>> > */
>> > static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
>> > {
>> > struct elantech_data *etd = psmouse->private;
>> > + int packet_type;
>> >
>> > if (psmouse->pktcnt < psmouse->pktsize)
>> > return PSMOUSE_GOOD_DATA;
>> > @@ -429,6 +555,18 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
>> >
>> > elantech_report_absolute_v2(psmouse);
>> > break;
>> > +
>> > + case 3:
>> > + packet_type = elantech_packet_check_v3(psmouse);
>> > + /* ignore debounce */
>> > + if (packet_type == PACKET_DEBOUNCE)
>> > + return PSMOUSE_FULL_PACKET;
>> > +
>> > + if (packet_type == PACKET_UNKNOWN)
>> > + return PSMOUSE_BAD_DATA;
>> > +
>> > + elantech_report_absolute_v3(psmouse, packet_type);
>> > + break;
>> > }
>> >
>> > return PSMOUSE_FULL_PACKET;
>> > @@ -463,8 +601,15 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
>> > elantech_write_reg(psmouse, 0x11, etd->reg_11) ||
>> > elantech_write_reg(psmouse, 0x21, etd->reg_21)) {
>> > rc = -1;
>> > - break;
>> > }
>> > + break;
>> > +
>> > + case 3:
>> > + etd->reg_10 = 0x0b;
>> > + if (elantech_write_reg(psmouse, 0x10, etd->reg_10))
>> > + rc = -1;
>> > +
>> > + break;
>> > }
>> >
>> > if (rc == 0) {
>> > @@ -498,11 +643,12 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
>> > return rc;
>> > }
>> >
>> > -static void set_range(struct psmouse *psmouse, unsigned int *x_min,
>> > +static int set_range(struct psmouse *psmouse, unsigned int *x_min,
>> > unsigned int *y_min, unsigned int *x_max,
>> > unsigned int *y_max)
>> > {
>> > struct elantech_data *etd = psmouse->private;
>> > + unsigned char param[3];
>> > int i;
>> >
>> > switch (etd->hw_version) {
>> > @@ -530,19 +676,30 @@ static void set_range(struct psmouse *psmouse, unsigned int *x_min,
>> > *y_max = (etd->capabilities[2] - i) * 64;
>> > }
>> > break;
>> > +
>> > + case 3:
>> > + if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param))
>> > + return -1;
>> > +
>> > + *x_max = (0x0f & param[0]) << 8 | param[1];
>> > + *y_max = (0xf0 & param[0]) << 4 | param[2];
>> > + break;
>> > }
>> > +
>> > + return 0;
>> > }
>> >
>> > /*
>> > * Set the appropriate event bits for the input subsystem
>> > */
>> > -static void elantech_set_input_params(struct psmouse *psmouse)
>> > +static int elantech_set_input_params(struct psmouse *psmouse)
>> > {
>> > struct input_dev *dev = psmouse->dev;
>> > struct elantech_data *etd = psmouse->private;
>> > unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0;
>> >
>> > - set_range(psmouse, &x_min, &y_min, &x_max, &y_max);
>> > + if (set_range(psmouse, &x_min, &y_min, &x_max, &y_max))
>> > + return -1;
>> >
>> > __set_bit(EV_KEY, dev->evbit);
>> > __set_bit(EV_ABS, dev->evbit);
>> > @@ -570,6 +727,9 @@ static void elantech_set_input_params(struct psmouse *psmouse)
>> >
>> > case 2:
>> > __set_bit(BTN_TOOL_QUADTAP, dev->keybit);
>> > + __set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
>> > + /* fall through */
>> > + case 3:
>> > input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
>> > input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
>> > if (etd->reports_pressure) {
>> > @@ -578,7 +738,6 @@ static void elantech_set_input_params(struct psmouse *psmouse)
>> > input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
>> > ETP_WMAX_V2, 0, 0);
>> > }
>> > - __set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
>> > input_mt_init_slots(dev, 2);
>>
>> Should this be 3?
>>
>> > input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
>> > input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
>> > @@ -586,6 +745,8 @@ static void elantech_set_input_params(struct psmouse *psmouse)
>> > }
>> >
>> > etd->y_max = y_max;
>> > +
>> > + return 0;
>> > }
>> >
>> > struct elantech_attr_data {
>> > @@ -727,7 +888,8 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties)
>> > * Report this in case there are Elantech models that use a different
>> > * set of magic numbers
>> > */
>> > - if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) {
>> > + if (param[0] != 0x3c || param[1] != 0x03 ||
>> > + (param[2] != 0xc8 && param[2] != 0x00)) {
>> > pr_debug("unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
>> > param[0], param[1], param[2]);
>> > return -1;
>> > @@ -793,16 +955,16 @@ static int elantech_reconnect(struct psmouse *psmouse)
>> > /*
>> > * determine hardware version and set some properties according to it.
>> > */
>> > -static void elantech_set_properties(struct elantech_data *etd)
>> > +static int elantech_set_properties(struct elantech_data *etd)
>> > {
>> > - /*
>> > - * Assume every version greater than 0x020030 is new EeePC style
>> > - * hardware with 6 byte packets, except 0x020600
>> > - */
>> > if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600)
>> > etd->hw_version = 1;
>> > - else
>> > + else if (etd->fw_version < 0x150600)
>> > etd->hw_version = 2;
>> > + else if ((etd->fw_version & 0x0f0000) >> 16 == 5)
>> > + etd->hw_version = 3;
>> > + else
>> > + return -1;
>> >
>> > /*
>> > * Turn on packet checking by default.
>> > @@ -817,13 +979,15 @@ static void elantech_set_properties(struct elantech_data *etd)
>> > etd->jumpy_cursor =
>> > (etd->fw_version == 0x020022 || etd->fw_version == 0x020600);
>> >
>> > - if (etd->hw_version == 2) {
>> > + if (etd->hw_version > 1) {
>> > /* For now show extra debug information */
>> > etd->debug = 1;
>> >
>> > if (etd->fw_version >= 0x020800)
>> > etd->reports_pressure = true;
>> > }
>> > +
>> > + return 0;
>> > }
>> >
>> > /*
>> > @@ -850,9 +1014,12 @@ int elantech_init(struct psmouse *psmouse)
>> > pr_err("failed to query firmware version.\n");
>> > goto init_fail;
>> > }
>> > -
>> > etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
>> > - elantech_set_properties(etd);
>> > +
>> > + if (elantech_set_properties(etd)) {
>> > + pr_err("unknown hardware version, aborting...\n");
>> > + goto init_fail;
>> > + }
>> > pr_info("assuming hardware version %d "
>> > "(with firmware version 0x%02x%02x%02x)\n",
>> > etd->hw_version, param[0], param[1], param[2]);
>> > @@ -871,7 +1038,10 @@ int elantech_init(struct psmouse *psmouse)
>> > goto init_fail;
>> > }
>> >
>> > - elantech_set_input_params(psmouse);
>> > + if (elantech_set_input_params(psmouse)) {
>> > + pr_err("failed to query touchpad range.\n");
>> > + goto init_fail;
>> > + }
>> >
>> > error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj,
>> > &elantech_attr_group);
>> > @@ -883,7 +1053,7 @@ int elantech_init(struct psmouse *psmouse)
>> > psmouse->protocol_handler = elantech_process_byte;
>> > psmouse->disconnect = elantech_disconnect;
>> > psmouse->reconnect = elantech_reconnect;
>> > - psmouse->pktsize = etd->hw_version == 2 ? 6 : 4;
>> > + psmouse->pktsize = etd->hw_version > 1 ? 6 : 4;
>> >
>> > return 0;
>> >
>> > diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
>> > index d9e6144..236c33c 100644
>> > --- a/drivers/input/mouse/elantech.h
>> > +++ b/drivers/input/mouse/elantech.h
>> > @@ -16,6 +16,7 @@
>> > /*
>> > * Command values for Synaptics style queries
>> > */
>> > +#define ETP_FW_ID_QUERY 0x00
>> > #define ETP_FW_VERSION_QUERY 0x01
>> > #define ETP_CAPABILITIES_QUERY 0x02
>> >
>> > @@ -24,6 +25,7 @@
>> > */
>> > #define ETP_REGISTER_READ 0x10
>> > #define ETP_REGISTER_WRITE 0x11
>> > +#define ETP_REGISTER_READWRITE 0x00
>> >
>> > /*
>> > * Hardware version 2 custom PS/2 command value
>> > @@ -79,6 +81,14 @@
>> > #define ETP_WMIN_V2 0
>> > #define ETP_WMAX_V2 15
>> >
>> > +/*
>> > + * v3 hardware has 2 kinds of packet types.
>> > + */
>> > +#define PACKET_UNKNOWN 0x01
>> > +#define PACKET_DEBOUNCE 0x02
>> > +#define PACKET_V3_HEAD 0x03
>> > +#define PACKET_V3_TAIL 0x04
>> > +
>> > struct elantech_data {
>> > unsigned char reg_10;
>> > unsigned char reg_11;
>> > @@ -98,6 +108,8 @@ struct elantech_data {
>> > unsigned int fw_version;
>> > unsigned int single_finger_reports;
>> > unsigned int y_max;
>> > + unsigned int prev_x;
>> > + unsigned int prev_y;
>> > unsigned char parity[256];
>> > };
>> >
>> > --
>> > 1.7.4.1
>> >
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Tejun Heo: "Re: [PATCHSET cgroup] extend threadgroup locking"
Previous message: naveen yadav: "Re: Kernel crash (2.6.35.13)"
In reply to: JJ Ding: "Re: [PATCH v5 7/8] Input: elantech - add v3 hardware support"
Next in thread: Daniel Kurtz: "Re: [PATCH v5 7/8] Input: elantech - add v3 hardware support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]