Re: [PATCH 02/18] writeback: dirty position control

[Peter Zijlstra]

On Sun, 2011-09-04 at 09:53 +0800, Wu Fengguang wrote:
> + * (o) bdi control lines
> + *
> + * The control lines for the global/bdi setpoints both stretch up to @limit.
> + * The below figure illustrates the main bdi control line with an auxiliary
> + * line extending it to @limit.
> + *
> + *   o
> + *     o
> + *       o                                      [o] main control line
> + *         o                                    [*] auxiliary control line
> + *           o
> + *             o
> + *               o
> + *                 o
> + *                   o
> + *                     o
> + *                       o--------------------- balance point, rate scale = 1
> + *                       | o
> + *                       |   o
> + *                       |     o
> + *                       |       o
> + *                       |         o
> + *                       |           o
> + *                       |             o------- connect point, rate scale = 1/2
> + *                       |               .*
> + *                       |                 .   *
> + *                       |                   .      *
> + *                       |                     .         *
> + *                       |                       .           *
> + *                       |                         .              *
> + *                       |                           .                 *
> + *  [--------------------+-----------------------------.--------------------*]
> + *  0              bdi_setpoint                    x_intercept           limit
> + *
> + * The auxiliary control line allows smoothly throttling bdi_dirty down to
> + * normal if it starts high in situations like
> + * - start writing to a slow SD card and a fast disk at the same time. The SD
> + *   card's bdi_dirty may rush to many times higher than bdi_setpoint.
> + * - the bdi dirty thresh drops quickly due to change of JBOD workload 

In light of the global control thing already having a hard stop at
limit, what's the point of the auxiliary line? Why not simply run the
bdi control between [0.5, 1.5] and leave it at that?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/