Re: Some issues/regression when upgrading to 3.1-rc5

[Parag Warudkar]

On Tue, Sep 6, 2011 at 5:15 PM, Francis Moreau <francis.moro@xxxxxxxxx> wrote:
>
> [   13.335961] cfg80211: Calling CRDA to update world regulatory domain
> [   13.386127] b43-phy0: Broadcom 4313 WLAN found (core revision 24)
> [   13.510112] bcma: PLL enable timeout
> [   13.510125] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 10, Type
> 8, Revision 1)
> [   13.510148] b43: probe of bcma0:0 failed with error -95
> [   13.510194] Broadcom 43xx driver loaded [ Features: PMNLS,
> Firmware-ID: FW13 ]

Sounds like with 3.x kernel the bcma/b43 combo is getting loaded which
doesn't support your wireless card.
While earlier on brcmsmac was getting loaded which did support your hardware.

You can try either disabling or blacklisting b43/bcma and only loading brcmsmac.

Unsure about the sound.

Parag

>
> whereas with 2.6.39 I had:
>
> [   13.580317] brcmsmac: module is from the staging directory, the
> quality is unknown, you have been warned.
> [   13.583668] brcmsmac 0000:12:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [   13.583676] brcmsmac 0000:12:00.0: setting latency timer to 64
>
> and the wireless network was working fine.
>
> Another point is that I can see now a lot of the following message:
>
> [   13.910324] hda_codec: too deep connection for 0x18
> [   13.910473] hda_codec: too deep connection for 0x18
> [   13.910560] hda_codec: too deep connection for 0x18
> [   13.910562] hda_codec: too deep connection for 0x18
> [   13.910563] hda_codec: too deep connection for 0x18
> ...
> [   13.911401] hda_codec: too deep connection for 0x11
> [   13.911407] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
> [   13.911409]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [   13.911410]    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
> [   13.911411]    mono: mono_out=0x0
> [   13.911412]    inputs: Mic=0xa
> [   13.911686] stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0)
> [   13.911988] hda_codec: too deep connection for 0x17
> [   13.911989] hda_codec: too deep connection for 0x17
> ...
>
> however the sound is still working.
>
> Hope someone can help me.
>
> Thanks
> --
> Francis
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/