Re: re add support for bcm5750

[Francesco Piccinno]

I have contacted Broadcom asking for support and apparently there is
no way to fix the problem. Now I have a couple of questions: the use
of tg3 driver without a firmware expose the NIC to some risks or not?
And is there any chance to have the PCI IDs added back to tg3 module?
I do not want to modify and recompile the module at every version
bump.

Thanks for the support :)

--
Best regards,
Francesco Piccinno



On Wed, Sep 7, 2011 at 8:36 PM, Florian Mickler <florian@xxxxxxxxxxx> wrote:
> On Tue, 6 Sep 2011 18:25:15 -0700
> "Matt Carlson" <mcarlson@xxxxxxxxxxxx> wrote:
>
>> On Tue, Sep 06, 2011 at 08:03:43AM -0700, Florian Mickler wrote:
>> > Hi,
>> >
>> > in https://bugzilla.kernel.org/show_bug.cgi?id=42132 Francesco wrote:
>> >
>> > > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
>> > > ouput of lspci is:
>> > >
>> > > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
>> > > Gigabit Ethernet [14e4:167c]
>> > >
>> > > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
>> > > device. I wish to have the support for this network card back again. Thanks!
>>
>> Hi Florian. ÂAre you experiencing the same problem? ÂWe found that
>> Francesco's problem was that the firmware of his device was missing. ÂDo
>> you see :
>>
>> eth0: No firmware running
>>
>> messages?
>>
>
> Hi Matt!
> No, I was just browsing the regression list and found this entry but
> couldn't associate any action with it.
>
> This clears that up, thanks for the information and I will close this
> bug.
>
> Regards,
> Flo
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/