Re: re add support for bcm5750

From: Matt Carlson
Date: Fri Sep 16 2011 - 12:28:55 EST


On Fri, Sep 16, 2011 at 06:39:30AM -0700, Francesco Piccinno wrote:
> I have contacted Broadcom asking for support and apparently there is
> no way to fix the problem. Now I have a couple of questions: the use
> of tg3 driver without a firmware expose the NIC to some risks or not?
> And is there any chance to have the PCI IDs added back to tg3 module?
> I do not want to modify and recompile the module at every version
> bump.
>
> Thanks for the support :)

That's the plan. It's on my TODO list to add support back in.

> --
> Best regards,
> Francesco Piccinno
>
>
>
> On Wed, Sep 7, 2011 at 8:36 PM, Florian Mickler <florian@xxxxxxxxxxx> wrote:
> > On Tue, 6 Sep 2011 18:25:15 -0700
> > "Matt Carlson" <mcarlson@xxxxxxxxxxxx> wrote:
> >
> >> On Tue, Sep 06, 2011 at 08:03:43AM -0700, Florian Mickler wrote:
> >> > Hi,
> >> >
> >> > in https://bugzilla.kernel.org/show_bug.cgi?id=42132 Francesco wrote:
> >> >
> >> > > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
> >> > > ouput of lspci is:
> >> > >
> >> > > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
> >> > > Gigabit Ethernet [14e4:167c]
> >> > >
> >> > > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
> >> > > device. I wish to have the support for this network card back again. Thanks!
> >>
> >> Hi Florian. ??Are you experiencing the same problem? ??We found that
> >> Francesco's problem was that the firmware of his device was missing. ??Do
> >> you see :
> >>
> >> eth0: No firmware running
> >>
> >> messages?
> >>
> >
> > Hi Matt!
> > No, I was just browsing the regression list and found this entry but
> > couldn't associate any action with it.
> >
> > This clears that up, thanks for the information and I will close this
> > bug.
> >
> > Regards,
> > Flo
> >
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/