[PATCHv8] UBI: new module ubiblk: block layer on top of UBI

From: David Wagner
Date: Mon Sep 26 2011 - 10:25:28 EST


ubiblk is a read-only block layer on top of UBI. It presents UBI volumes as
read-only block devices (named ubiblkX_Y, where X is the UBI device number
and Y the Volume ID).

It is used by putting a block filesystem image on a UBI volume, creating the
corresponding ubiblk device and then mounting it.

It uses the UBI API to register to UBI notifications and to read from the
volumes. It also creates a ubiblk_ctrl device node that simply receives ioctl
from a userspace tool for creating/removing ubiblk devices.

Some code is taken from mtd_blkdevs and gluebi. Some code for the ioctl part is
also inspired from ubi's core.

Advantages of ubiblk over gluebi+mtdblock_ro:

* Simpler architecture

* The numbering of devices is much easier with ubiblk than with
gluebi+mtdblock_ro. With gluebi+mtdblock_ro, you get one additional MTD
device for each UBI volume, so the number of MTD devices grows quite a lot
and is a bit difficult to understand. For example, mtdblock[0-4] might be
your real MTD partitions, while mtdblock[5-9] might be your UBI volumes.
It also means that if a new real MTD partition is added, the index of all the
MTD devices exposing UBI volumes will be shifted by one, which is a bit
confusing/annoying.
As well, if you add an UBI volume, the mtdblock devices that are emulated on
top of volumes that come after this new one will have their ID incremented.

* ubiblk devices are created on a 'on-demand' basis, which avoids wasting
resources.

* It is also possible to specify a "volume" parameter in order to create a
ubiblk device at init time. This makes possible to put a rootfs on a ubiblk
device. Format: "<ubi device number>:<volume name|volume ID>"

* The performance appears to be slightly better with ubiblk than
gluebi+mtdblock_ro, according to our benchmarks (see
http://elinux.org/Flash_Filesystem_Benchmarks_2.6.39)

Signed-off-by: David Wagner <david.wagner@xxxxxxxxxxxxxxxxxx>
Cc: Artem Bityutskiy <dedekind1@xxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
---

changes since v7:
~~~~~~~~~~~~~~~~~

* It is now possible to pass the volume id OR the volume name in the "volume"
parameter. The two functions responsible for that have been reorganized and
renamed.

Documentation/ioctl/ioctl-number.txt | 1 +
drivers/mtd/ubi/Kconfig | 16 +
drivers/mtd/ubi/Makefile | 1 +
drivers/mtd/ubi/ubiblk.c | 755 ++++++++++++++++++++++++++++++++++
include/mtd/Kbuild | 1 +
include/mtd/ubiblk-user.h | 48 +++
6 files changed, 822 insertions(+), 0 deletions(-)
create mode 100644 drivers/mtd/ubi/ubiblk.c
create mode 100644 include/mtd/ubiblk-user.h

diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 845a191..b24df7f 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -150,6 +150,7 @@ Code Seq#(hex) Include File Comments
'M' 00-0F drivers/video/fsl-diu-fb.h conflict!
'N' 00-1F drivers/usb/scanner.h
'O' 00-06 mtd/ubi-user.h UBI
+'O' 10-11 mtd/ubiblk-user.h ubiblk
'P' all linux/soundcard.h conflict!
'P' 60-6F sound/sscape_ioctl.h conflict!
'P' 00-0F drivers/usb/class/usblp.c conflict!
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 4dcc752..977934a 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -60,4 +60,20 @@ config MTD_UBI_DEBUG
help
This option enables UBI debugging.

+config MTD_UBI_UBIBLK
+ tristate "Read-only block transition layer on top of UBI"
+ help
+ Read-only block interface on top of UBI.
+
+ This option adds ubiblk, which creates a read-ony block device from
+ UBI volumes. It makes it possible to use R/O block filesystems on
+ top of UBI volumes (and hence, on top of MTDs while avoiding bad
+ blocks).
+
+ ubiblk devices are created by invoking appropriate ioctl to the
+ ubiblk_ctrl device node.
+
+ The devices are named ubiblkX_Y where X is the UBI number and Y is
+ the Volume ID.
+
endif # MTD_UBI
diff --git a/drivers/mtd/ubi/Makefile b/drivers/mtd/ubi/Makefile
index c9302a5..354b2df 100644
--- a/drivers/mtd/ubi/Makefile
+++ b/drivers/mtd/ubi/Makefile
@@ -5,3 +5,4 @@ ubi-y += misc.o

ubi-$(CONFIG_MTD_UBI_DEBUG) += debug.o
obj-$(CONFIG_MTD_UBI_GLUEBI) += gluebi.o
+obj-$(CONFIG_MTD_UBI_UBIBLK) += ubiblk.o
diff --git a/drivers/mtd/ubi/ubiblk.c b/drivers/mtd/ubi/ubiblk.c
new file mode 100644
index 0000000..32fc9d1
--- /dev/null
+++ b/drivers/mtd/ubi/ubiblk.c
@@ -0,0 +1,755 @@
+/*
+ * Copyright (c) Free Electrons, 2011
+ * Copyright (c) International Business Machines Corp., 2006
+ * Copyright © 2003-2010 David Woodhouse <dwmw2@xxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: David Wagner
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/vmalloc.h>
+#include <linux/mtd/ubi.h>
+#include <linux/blkdev.h>
+#include <linux/miscdevice.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <mtd/ubiblk-user.h>
+#include "ubi.h"
+#include "ubi-media.h"
+
+#define BLK_SIZE 512
+
+/**
+ * struct ubiblk_dev - represents a ubiblk device, proxying a UBI volume
+ * @desc: open UBI volume descriptor
+ * @vi: UBI volume information
+ * @ubi_num: UBI device number
+ * @vol_id: UBI volume identifier
+ * @refcnt: reference counter (increases with open(), decreases with release())
+ * @gd: the disk (block device) created by ubiblk
+ * @rq: the request queue to @gd
+ * @req_task: the thread processing @rq requests
+ * @vol_lock: protects write access to the elements of this structure
+ * @queue_lock: avoids concurrent accesses to the request queue
+ * @list: linked list structure
+ */
+struct ubiblk_dev {
+ struct ubi_volume_desc *desc;
+ struct ubi_volume_info *vi;
+ int ubi_num;
+ int vol_id;
+ int refcnt;
+
+ struct gendisk *gd;
+ struct request_queue *rq;
+ struct task_struct *req_task;
+
+ struct mutex vol_lock;
+
+ spinlock_t queue_lock;
+
+ struct list_head list;
+};
+
+/* Linked list of all ubiblk_dev instances */
+static LIST_HEAD(ubiblk_devs);
+
+/* Avoid concurrent access to the above list */
+static DEFINE_MUTEX(devlist_lock);
+
+static int ubiblk_major;
+static const struct block_device_operations ubiblk_ops;
+
+/* The device receiving the ioctls */
+static struct miscdevice ctrl_dev;
+
+/* +3 is for the separator and the UBI device num */
+#define VOL_PARAM_MAXLEN (UBI_VOL_NAME_MAX + 3)
+static char *volume;
+module_param(volume, charp, 0000);
+MODULE_PARM_DESC(volume,
+ "Format: volume=<ubi_num>:<vol_id>\n"
+ "Create a ubiblk device at init time. Useful for mounting it as root "
+ "device.");
+
+static struct ubiblk_dev *find_dev(struct ubi_volume_info *vi)
+{
+ struct ubiblk_dev *dev;
+
+ list_for_each_entry(dev, &ubiblk_devs, list) {
+ if (dev && dev->ubi_num == vi->ubi_num &&
+ dev->vol_id == vi->vol_id)
+ return dev;
+ }
+ return NULL;
+}
+
+/**
+ * do_ubiblk_request - Read a LEB and fill the request buffer with the
+ * requested sector.
+ * @req: the request data structure
+ * @dev: the ubiblk device on which the request is issued
+ */
+static int do_ubiblk_request(struct request *req, struct ubiblk_dev *dev)
+{
+ unsigned long start, len, read_bytes;
+ int offset;
+ int leb;
+ int ret;
+
+ start = blk_rq_pos(req) << 9;
+ len = blk_rq_cur_bytes(req);
+ read_bytes = 0;
+
+ /* We are always reading. No need to handle writing for now */
+
+ leb = start / dev->vi->usable_leb_size;
+ offset = start % dev->vi->usable_leb_size;
+
+ do {
+ if (offset + len > dev->vi->usable_leb_size)
+ len = dev->vi->usable_leb_size - offset;
+
+ if (unlikely(blk_rq_pos(req) + blk_rq_cur_sectors(req) >
+ get_capacity(req->rq_disk))) {
+ dev_err(disk_to_dev(dev->gd),
+ "attempting to read too far\n");
+ return -EIO;
+ }
+
+ /* Read (len) bytes of LEB (leb) from (offset) and put the
+ * result in the buffer given by the request.
+ * If the request is overlapping on several lebs, (read_bytes)
+ * will be > 0 and the data will be put in the buffer at
+ * offset (read_bytes)
+ */
+ ret = ubi_read(dev->desc, leb, req->buffer + read_bytes,
+ offset, len);
+
+ if (ret) {
+ dev_err(disk_to_dev(dev->gd), "ubi_read error\n");
+ return ret;
+ }
+
+ read_bytes += len;
+
+ len = blk_rq_cur_bytes(req) - read_bytes;
+ leb++;
+ offset = 0;
+ } while (read_bytes < blk_rq_cur_bytes(req));
+
+ return 0;
+}
+
+/**
+ * ubiblk_request - wakes the processing thread
+ * @rq: the request queue which device is to be awaken
+ */
+static void ubiblk_request(struct request_queue *rq)
+{
+ struct ubiblk_dev *dev;
+ struct request *req;
+
+ dev = rq->queuedata;
+
+ if (!dev)
+ while ((req = blk_fetch_request(rq)) != NULL)
+ __blk_end_request_all(req, -ENODEV);
+ else
+ wake_up_process(dev->req_task);
+}
+
+/**
+ * ubiblk_open - open a UBI volume (get the volume descriptor).
+ * @bdev: the corresponding block device
+ * @mode: opening mode (don't care as long as ubiblk is read-only)
+ */
+static int ubiblk_open(struct block_device *bdev, fmode_t mode)
+{
+ struct ubiblk_dev *dev = bdev->bd_disk->private_data;
+ int err;
+
+ mutex_lock(&dev->vol_lock);
+ dev_dbg(disk_to_dev(dev->gd), "open(); refcnt = %d\n", dev->refcnt);
+ if (dev->refcnt > 0) {
+ /*
+ * The volume is already opened ; just increase the reference
+ * counter.
+ */
+ dev->refcnt++;
+ mutex_unlock(&dev->vol_lock);
+ return 0;
+ }
+
+ dev->desc = ubi_open_volume(dev->ubi_num, dev->vol_id,
+ UBI_READONLY);
+ if (IS_ERR(dev->desc)) {
+ dev_err(disk_to_dev(dev->gd), "failed to open");
+
+ err = PTR_ERR(dev->desc);
+ dev->desc = NULL;
+ goto out_unlock;
+ }
+
+ dev->vi = kzalloc(sizeof(struct ubi_volume_info), GFP_KERNEL);
+ if (!dev->vi) {
+ err = -ENOMEM;
+ goto out_close;
+ }
+ ubi_get_volume_info(dev->desc, dev->vi);
+
+ dev->refcnt++;
+ dev_dbg(disk_to_dev(dev->gd), "opened mode=%d\n", mode);
+ mutex_unlock(&dev->vol_lock);
+ return 0;
+
+out_close:
+ ubi_close_volume(dev->desc);
+ dev->desc = NULL;
+out_unlock:
+ mutex_unlock(&dev->vol_lock);
+ return err;
+}
+
+/**
+ * ubiblk_release - close a UBI volume (close the volume descriptor).
+ * @gd: the disk that was previously opened
+ * @mode: don't care
+ */
+static int ubiblk_release(struct gendisk *gd, fmode_t mode)
+{
+ struct ubiblk_dev *dev = gd->private_data;
+
+ mutex_lock(&dev->vol_lock);
+ dev_dbg(disk_to_dev(dev->gd), "release(); refcnt = %d\n", dev->refcnt);
+
+ dev->refcnt--;
+ if (dev->refcnt == 0) {
+ kfree(dev->vi);
+ dev->vi = NULL;
+
+ ubi_close_volume(dev->desc);
+ dev->desc = NULL;
+
+ dev_dbg(disk_to_dev(dev->gd), "released, mode=%d\n", mode);
+ }
+
+ mutex_unlock(&dev->vol_lock);
+ return 0;
+}
+
+/**
+ * ubiblk_thread - loop on the block request queue and wait for new
+ * requests ; run them with do_ubiblk_request(). Mostly copied from
+ * mtd_blkdevs.c.
+ * @arg: the ubiblk device which request queue to process
+ */
+static int ubiblk_thread(void *arg)
+{
+ struct ubiblk_dev *dev = arg;
+ struct request_queue *rq = dev->rq;
+ struct request *req = NULL;
+
+ spin_lock_irq(rq->queue_lock);
+
+ while (!kthread_should_stop()) {
+ int res;
+
+ if (!req)
+ req = blk_fetch_request(rq);
+ if (!req) {
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ if (kthread_should_stop())
+ set_current_state(TASK_RUNNING);
+
+ spin_unlock_irq(rq->queue_lock);
+ schedule();
+ spin_lock_irq(rq->queue_lock);
+ continue;
+ }
+
+ spin_unlock_irq(rq->queue_lock);
+
+ mutex_lock(&dev->vol_lock);
+ res = do_ubiblk_request(req, dev);
+ mutex_unlock(&dev->vol_lock);
+
+ spin_lock_irq(rq->queue_lock);
+
+ if (!__blk_end_request_cur(req, res))
+ req = NULL;
+ }
+
+ if (req)
+ __blk_end_request_all(req, -EIO);
+
+ spin_unlock_irq(rq->queue_lock);
+
+ return 0;
+}
+
+/**
+ * ubiblk_create - create a ubiblk device proxying a UBI volume.
+ * @vi: the UBI volume information data structure
+ *
+ * An UBI volume has been created ; create a corresponding ubiblk device:
+ * Initialize the locks, the structure, the block layer infos and start a
+ * req_task.
+ */
+static int ubiblk_create(struct ubi_volume_info *vi)
+{
+ struct ubiblk_dev *dev;
+ struct gendisk *gd;
+ int disk_capacity;
+ int ret;
+
+ mutex_lock(&devlist_lock);
+ /* Check that the volume isn't already proxyfied */
+ if (find_dev(vi)) {
+ ret = -EEXIST;
+ goto out_unlock;
+ }
+
+ dev = kzalloc(sizeof(struct ubiblk_dev), GFP_KERNEL);
+ if (!dev) {
+ ret = -ENOMEM;
+ goto out_unlock;
+ }
+
+ mutex_init(&dev->vol_lock);
+
+ dev->ubi_num = vi->ubi_num;
+ dev->vol_id = vi->vol_id;
+
+ /* Initialize the gendisk of this ubiblk device */
+ gd = alloc_disk(1);
+ if (!gd) {
+ pr_err("alloc_disk failed\n");
+ ret = -ENODEV;
+ goto out_free_dev;
+ }
+
+ gd->fops = &ubiblk_ops;
+ gd->major = ubiblk_major;
+ gd->first_minor = dev->ubi_num * UBI_MAX_VOLUMES + dev->vol_id;
+ gd->private_data = dev;
+ sprintf(gd->disk_name, "ubiblk%d_%d", dev->ubi_num, dev->vol_id);
+ disk_capacity = (vi->size * vi->usable_leb_size) >> 9;
+ set_capacity(gd, disk_capacity);
+ set_disk_ro(gd, 1);
+ dev->gd = gd;
+
+ spin_lock_init(&dev->queue_lock);
+ dev->rq = blk_init_queue(ubiblk_request, &dev->queue_lock);
+ if (!dev->rq) {
+ pr_err("blk_init_queue failed\n");
+ ret = -ENODEV;
+ goto out_put_disk;
+ }
+ dev->rq->queuedata = dev;
+ blk_queue_logical_block_size(dev->rq, BLK_SIZE);
+ dev->gd->queue = dev->rq;
+
+ /* Borrowed from mtd_blkdevs.c */
+ /* Create processing req_task
+ *
+ * The processing of the request has to be done in process context (it
+ * might sleep) but blk_run_queue can't block ; so we need to separate
+ * the event of a request being added to the queue (which triggers the
+ * callback ubiblk_request - that is set with blk_init_queue())
+ * and the processing of that request.
+ *
+ * Thus, the sole purpose of ubi_ubiblk_reuqest is to wake the kthread
+ * up so that it will process the request queue
+ */
+ dev->req_task = kthread_run(ubiblk_thread, dev, "%s%d_%d",
+ "kubiblk", dev->ubi_num, dev->vol_id);
+ if (IS_ERR(dev->req_task)) {
+ ret = PTR_ERR(dev->req_task);
+ goto out_cleanup_queue;
+ }
+
+ list_add(&dev->list, &ubiblk_devs);
+ add_disk(dev->gd);
+
+ dev_info(disk_to_dev(dev->gd),
+ "created from ubi%d:%d(%s)\n", dev->ubi_num, dev->vol_id,
+ vi->name);
+
+ mutex_unlock(&devlist_lock);
+
+ return 0;
+
+out_cleanup_queue:
+ blk_cleanup_queue(dev->rq);
+out_put_disk:
+ put_disk(dev->gd);
+out_free_dev:
+ kfree(dev);
+out_unlock:
+ mutex_unlock(&devlist_lock);
+
+ return ret;
+}
+
+/**
+ * ubiblk_remove - destroy a ubiblk device.
+ * @vi: the UBI volume information data structure
+ *
+ * A UBI volume has been removed or we are requested to unproxify a volume ;
+ * destroy the corresponding ubiblk device.
+ */
+static int ubiblk_remove(struct ubi_volume_info *vi)
+{
+ struct ubiblk_dev *dev;
+
+ mutex_lock(&devlist_lock);
+
+ dev = find_dev(vi);
+ if (!dev) {
+ mutex_unlock(&devlist_lock);
+ pr_warn("trying to remove %s, but it isn't handled\n",
+ vi->name);
+ return -ENODEV;
+ }
+
+ mutex_lock(&dev->vol_lock);
+ if (dev->desc) {
+ mutex_unlock(&dev->vol_lock);
+ mutex_unlock(&devlist_lock);
+ return -EBUSY;
+ }
+
+ del_gendisk(dev->gd);
+ blk_cleanup_queue(dev->rq);
+ kthread_stop(dev->req_task);
+ put_disk(dev->gd);
+
+ list_del(&dev->list);
+ mutex_unlock(&dev->vol_lock);
+ mutex_unlock(&devlist_lock);
+
+ kfree(dev);
+ pr_info("unproxyfied %s\n", vi->name);
+ return 0;
+}
+
+/**
+ * ubiblk_resize - resize a ubiblk device.
+ * @vi: the UBI volume information data structure
+ *
+ * A UBI volume has been resized, change the ubiblk device geometry accordingly.
+ */
+static int ubiblk_resize(struct ubi_volume_info *vi)
+{
+ struct ubiblk_dev *dev;
+ int disk_capacity;
+
+ /* We don't touch the list, but we better lock it: it could be that the
+ * device gets removed between the time the device has been found and
+ * the time we access dev->gd
+ */
+ mutex_lock(&devlist_lock);
+ dev = find_dev(vi);
+ if (!dev) {
+ mutex_unlock(&devlist_lock);
+ pr_warn("trying to resize %s, which isn't handled\n",
+ vi->name);
+ return -ENODEV;
+ }
+
+ mutex_lock(&dev->vol_lock);
+ disk_capacity = (vi->size * vi->usable_leb_size) >> 9;
+ set_capacity(dev->gd, disk_capacity);
+ dev_dbg(disk_to_dev(dev->gd), "resized to %d LEBs\n", vi->size);
+ mutex_unlock(&dev->vol_lock);
+
+ mutex_unlock(&devlist_lock);
+ return 0;
+}
+
+/**
+ * ubiblk_notify - dispatches the UBI notifications.
+ * @nb: unused
+ * @notification_type: the notification type sent by UBI
+ * @ns_ptr: contains the notifications' additional informations
+ */
+static int ubiblk_notify(struct notifier_block *nb,
+ unsigned long notification_type, void *ns_ptr)
+{
+ struct ubi_notification *nt = ns_ptr;
+
+ switch (notification_type) {
+ case UBI_VOLUME_REMOVED:
+ ubiblk_remove(&nt->vi);
+ break;
+ case UBI_VOLUME_RESIZED:
+ ubiblk_resize(&nt->vi);
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static const struct block_device_operations ubiblk_ops = {
+ .owner = THIS_MODULE,
+ .open = ubiblk_open,
+ .release = ubiblk_release,
+};
+
+static struct notifier_block ubiblk_notifier = {
+ .notifier_call = ubiblk_notify,
+};
+
+
+/**
+ * ubiblk_ctrl_ioctl - ioctl handling for proxying/unproxying a UBI volume.
+ * @file: the file on which the ioctl was invoked (unused)
+ * @cmd: the ioctl type
+ * @arg: additional command informations
+ */
+static long ubiblk_ctrl_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ int err;
+ void __user *argp = (void __user *)arg;
+
+ struct ubi_volume_desc *desc;
+ struct ubi_volume_info vi;
+ struct ubiblk_ctrl_req req;
+
+ if (!capable(CAP_SYS_RESOURCE))
+ return -EPERM;
+
+ err = copy_from_user(&req, argp, sizeof(struct ubiblk_ctrl_req));
+ if (err)
+ return -EFAULT;
+
+ if (req.ubi_num < 0 || req.vol_id < 0)
+ return -EINVAL;
+
+ desc = ubi_open_volume(req.ubi_num, req.vol_id, UBI_READONLY);
+ if (IS_ERR(desc)) {
+ dev_err(ctrl_dev.this_device, "opening ubi%d:%d failed\n",
+ req.ubi_num, req.vol_id);
+ return PTR_ERR(desc);
+ }
+
+ ubi_get_volume_info(desc, &vi);
+
+ switch (cmd) {
+ case UBIBLK_IOCADD:
+ dev_info(ctrl_dev.this_device, "proxying ubi%d:%d\n",
+ req.ubi_num, req.vol_id);
+ err = ubiblk_create(&vi);
+ break;
+ case UBIBLK_IOCDEL:
+ dev_info(ctrl_dev.this_device, "unproxying ubi%d:%d\n",
+ req.ubi_num, req.vol_id);
+ err = ubiblk_remove(&vi);
+ break;
+
+ default:
+ err = -ENOTTY;
+ break;
+ }
+
+ ubi_close_volume(desc);
+
+ return err;
+}
+
+/* ubiblk control device (receives ioctls) */
+static const struct file_operations ubiblk_ctrl_ops = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = ubiblk_ctrl_ioctl,
+ .llseek = no_llseek,
+};
+static struct miscdevice ctrl_dev = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "ubiblk_ctrl",
+ .fops = &ubiblk_ctrl_ops,
+};
+
+/**
+ * volume_param_parse - parse the "volume" module parameter.
+ * @ubi_num: where to store the UBI device number
+ * @vol_name: where to store the volume name (fixed lenght, at least
+ * UBI_VOL_NAME_MAX)
+ */
+static struct ubi_volume_desc __init *inittime_volume_open(void)
+{
+ char *tokens[2] = {NULL, NULL};
+ char buf[VOL_PARAM_MAXLEN + 1];
+ char *pbuf = buf;
+
+ int len = strlen(volume);
+
+ int ubi_num, vol_id;
+ char vol_name[UBI_VOL_NAME_MAX + 1];
+ struct ubi_volume_desc *desc;
+
+ int err;
+
+ if (len > VOL_PARAM_MAXLEN || len == 0)
+ return ERR_PTR(-EINVAL);
+
+ strcpy(buf, volume);
+ tokens[0] = strsep(&pbuf, ":");
+ tokens[1] = strsep(&pbuf, ":");
+
+ if (pbuf)
+ return ERR_PTR(-EINVAL); /* There are surnumerous parameters */
+
+ err = kstrtoint(tokens[0], 10, &ubi_num);
+ if (err < 0 || ubi_num < 0)
+ return ERR_PTR(err);
+
+ len = strlen(tokens[1]);
+ if (len > UBI_VOL_NAME_MAX || len == 0)
+ return ERR_PTR(-EINVAL);
+ strcpy(vol_name, tokens[1]);
+
+ /* Try to open it by its name */
+ desc = ubi_open_volume_nm(ubi_num, vol_name, UBI_READONLY);
+ if (!IS_ERR(desc))
+ return desc;
+
+ /* Convert the vol_name string to int and try to open it by its ID */
+ err = kstrtoint(tokens[1], 10, &vol_id);
+ if (err < 0)
+ return ERR_PTR(err);
+
+ return ubi_open_volume(ubi_num, vol_id, UBI_READONLY);
+}
+
+/**
+ * inittime_volume - create a volume at init time.
+ *
+ * If the user passed a "ubiblk.volume" argument, check it and create the said
+ * volume.
+ */
+static int __init inittime_device(void)
+{
+ int err;
+ struct ubi_volume_desc *desc;
+ struct ubi_volume_info vi;
+
+ desc = inittime_volume_open();
+ if (IS_ERR(desc)) {
+ pr_err("failed to open ubi%s: %ld\n", volume, PTR_ERR(desc));
+ return PTR_ERR(desc);
+ }
+
+ ubi_get_volume_info(desc, &vi);
+ err = ubiblk_create(&vi);
+ if (err < 0)
+ pr_err("can't create the initial device "
+ "ubiblk%d_%d: %d\n", vi.ubi_num, vi.vol_id, err);
+ ubi_close_volume(desc);
+
+ return err;
+}
+
+/**
+ * ubiblk_init - initialize the module.
+ *
+ * Get a major number and register to UBI notifications ; register the ioctl
+ * handler device.
+ */
+static int __init ubiblk_init(void)
+{
+ int ret;
+
+ ret = register_blkdev(0, "ubiblk");
+ if (ret < 0)
+ return ret;
+ ubiblk_major = ret;
+
+ ret = ubi_register_volume_notifier(&ubiblk_notifier, 1);
+ if (ret < 0)
+ goto out_unreg_blk;
+
+ ret = misc_register(&ctrl_dev);
+ if (ret < 0) {
+ pr_err("can't register control device\n");
+ goto out_unreg_notifier;
+ }
+
+ /* Check if the user wants a volume to be proxified at init time */
+ if (volume) {
+ ret = inittime_device();
+ if (ret < 0)
+ goto out_unreg_misc;
+ }
+
+ pr_info("major device number is %d\n", ubiblk_major);
+
+ return ret;
+
+out_unreg_misc:
+ misc_deregister(&ctrl_dev);
+out_unreg_notifier:
+ ubi_unregister_volume_notifier(&ubiblk_notifier);
+out_unreg_blk:
+ unregister_blkdev(ubiblk_major, "ubiblk");
+
+ return ret;
+}
+
+/**
+ * ubiblk_exit - end of life.
+ *
+ * Unregister the block device major, unregister from UBI notifications,
+ * unregister the ioctl handler device, stop the threads and free the memory.
+ */
+static void __exit ubiblk_exit(void)
+{
+ struct ubiblk_dev *next;
+ struct ubiblk_dev *dev;
+
+ ubi_unregister_volume_notifier(&ubiblk_notifier);
+ misc_deregister(&ctrl_dev);
+
+ list_for_each_entry_safe(dev, next, &ubiblk_devs, list) {
+ /* The module is being forcefully removed */
+ WARN_ON(dev->desc);
+
+ del_gendisk(dev->gd);
+ blk_cleanup_queue(dev->rq);
+ kthread_stop(dev->req_task);
+ put_disk(dev->gd);
+
+ kfree(dev);
+ }
+
+ unregister_blkdev(ubiblk_major, "ubiblk");
+}
+
+module_init(ubiblk_init);
+module_exit(ubiblk_exit);
+MODULE_DESCRIPTION("Read-only block transition layer on top of UBI");
+MODULE_AUTHOR("David Wagner");
+MODULE_LICENSE("GPL");
diff --git a/include/mtd/Kbuild b/include/mtd/Kbuild
index 192f8fb..d0d59d8 100644
--- a/include/mtd/Kbuild
+++ b/include/mtd/Kbuild
@@ -3,3 +3,4 @@ header-y += mtd-abi.h
header-y += mtd-user.h
header-y += nftl-user.h
header-y += ubi-user.h
+header-y += ubiblk-user.h
diff --git a/include/mtd/ubiblk-user.h b/include/mtd/ubiblk-user.h
new file mode 100644
index 0000000..61692d5
--- /dev/null
+++ b/include/mtd/ubiblk-user.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright © Free Electrons, 2011
+ * Copyright © International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: David Wagner
+ */
+
+#ifndef __UBIBLK_USER_H__
+#define __UBIBLK_USER_H__
+
+#include <linux/types.h>
+
+/**
+ * ubiblk_ctrl_req - additional ioctl data structure
+ * @ubi_num: UBI device number
+ * @vol_id: UBI volume identifier
+ * @padding: reserved for future, must contain zeroes
+ */
+struct ubiblk_ctrl_req {
+ __s32 ubi_num;
+ __s32 vol_id;
+ __u8 padding[8];
+} __packed;
+
+/* ioctl commands of the UBI control character device */
+#define UBIBLK_CTRL_IOC_MAGIC 'O'
+
+/* Create a ubiblk device from a UBI volume */
+#define UBIBLK_IOCADD _IOW(UBIBLK_CTRL_IOC_MAGIC, 0x10, struct ubiblk_ctrl_req)
+/* Delete a ubiblk device */
+#define UBIBLK_IOCDEL _IOW(UBIBLK_CTRL_IOC_MAGIC, 0x11, struct ubiblk_ctrl_req)
+/* If you add ioctls here, please note that UBI uses 'O'/0x00-0x06 */
+
+#endif
--
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/