Re: [PATCH 3/7] i2c-eg20t: delete 10bit access processing

[Tomoya MORINAGA]

(2011/09/23 2:49), Jeffrey (Sheng-Hui) Chu wrote:
> The device is BCM20791.  Please contact Aaron Smith (aarons@xxxxxxxxxxxx) for evaluation.
Though googling the device, I can't find the device.
Broadcom website too.

> By the way, the existing handling of 10-bit address in the patch you intended to delete does not work.  You'll need to fix that before you can test with the device successfully.
>
> For the write operation, it's a easy fix:
>
> @@ -410,25 +408,16 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
>   	}
>
>   	if (msgs->flags&  I2C_M_TEN) {
> -		addr_2_msb = ((addr&  I2C_MSB_2B_MSK)>>  7);
> +		addr_2_msb = ((addr&  I2C_MSB_2B_MSK)>>  7)&  0x06;
>
>
> For the read operation, static s32 pch_i2c_readbytes(), you'll need to do a write followed by a restart and a read...  please refer to the i2c spec...
>
> Regards,

Thank you for your indication.
We will update this after supporting 10bit access.

Thanks,
tomoya
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/