[PATCH v3 22/24] C6X: EMIF - External Memory Interface

From: Mark Salter
Date: Tue Sep 27 2011 - 16:32:41 EST


Several SoC parts provide a simple bridge to support external memory mapped
devices. This code probes the device tree for an EMIF node and sets up the
bridge registers if such a node is found. Beyond initial set up, there is no
further need to access the bridge control registers. External devices on the
bus are accessed through their MMIO registers using suitable drivers. The
bridge hardware does provide for timeout and other error interrupts, but these
are not yet supported.

Signed-off-by: Mark Salter <msalter@xxxxxxxxxx>
---
arch/c6x/platforms/emif.c | 88 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 88 insertions(+), 0 deletions(-)
create mode 100644 arch/c6x/platforms/emif.c

diff --git a/arch/c6x/platforms/emif.c b/arch/c6x/platforms/emif.c
new file mode 100644
index 0000000..6a0d4ff
--- /dev/null
+++ b/arch/c6x/platforms/emif.c
@@ -0,0 +1,88 @@
+/*
+ * External Memory Interface
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated
+ * Author: Mark Salter <msalter@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <asm/soc.h>
+#include <asm/dscr.h>
+
+#define NUM_EMIFA_CHIP_ENABLES 4
+
+struct emifa_regs {
+ u32 midr;
+ u32 stat;
+ u32 reserved1[6];
+ u32 bprio;
+ u32 reserved2[23];
+ u32 ce_config;
+ u32 cecfg[NUM_EMIFA_CHIP_ENABLES];
+ u32 reserved3[4];
+ u32 awcc;
+ u32 reserved4[7];
+ u32 intraw;
+ u32 intmsk;
+ u32 intmskset;
+ u32 intmskclr;
+};
+
+static struct of_device_id emifa_match[] __initdata = {
+ { .compatible = "ti,c64x+emifa" },
+ {}
+};
+
+/*
+ * Parse device tree for existence of an EMIF (External Memory Interface)
+ * and initialize it if found.
+ */
+static int __init c6x_emifa_init(void)
+{
+ struct emifa_regs __iomem *regs;
+ struct device_node *node;
+ const __be32 *p;
+ u32 val;
+ int i, len, err;
+
+ node = of_find_matching_node(NULL, emifa_match);
+ if (!node)
+ return 0;
+
+ regs = of_iomap(node, 0);
+ if (!regs)
+ return 0;
+
+ /* look for a dscr-based enable for emifa pin buffers */
+ err = of_property_read_u32_array(node, "ti,dscr-dev-enable", &val, 1);
+ if (!err)
+ dscr_set_devstate(val, DSCR_DEVSTATE_ENABLED);
+
+ /* set up the chip enables */
+ p = of_get_property(node, "ti,emifa-ce-config", &len);
+ if (p) {
+ len /= sizeof(u32);
+ if (len > NUM_EMIFA_CHIP_ENABLES)
+ len = NUM_EMIFA_CHIP_ENABLES;
+ for (i = 0; i <= len; i++)
+ soc_writel(be32_to_cpup(&p[i]), &regs->cecfg[i]);
+ }
+
+ err = of_property_read_u32_array(node, "ti,emifa-burst-priority", &val, 1);
+ if (!err)
+ soc_writel(val, &regs->bprio);
+
+ err = of_property_read_u32_array(node, "ti,emifa-async-wait-control", &val, 1);
+ if (!err)
+ soc_writel(val, &regs->awcc);
+
+ iounmap(regs);
+ of_node_put(node);
+ return 0;
+}
+pure_initcall(c6x_emifa_init);
--
1.7.6.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/