[PATCH v4 0/3] Add support for tegra2 based ventana board

[Peter De Schrijver]

This patch set adds support for the tegra2 based ventana development board.

Boot tested on ventana.                                                                                                                               

Now finally without Change-IDs I hope...

Peter De Schrijver (3):
  arm/tegra: prepare Seaboard pinmux code for derived boards
  arm/tegra: add support for ventana pinmuxing
  arm/tegra: device tree support for ventana board

 arch/arm/boot/dts/tegra-ventana.dts         |   32 ++++++++++++++
 arch/arm/mach-tegra/Kconfig                 |    6 +++
 arch/arm/mach-tegra/Makefile                |    1 +
 arch/arm/mach-tegra/Makefile.boot           |    1 +
 arch/arm/mach-tegra/board-dt.c              |    5 ++-
 arch/arm/mach-tegra/board-seaboard-pinmux.c |   63 ++++++++++++++++++++++++---
 6 files changed, 101 insertions(+), 7 deletions(-)
 create mode 100644 arch/arm/boot/dts/tegra-ventana.dts

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/