[PATCH] PCI: Set device power state to PCI_D0 for device withoutnative PM support

[Ajaykumar Hotchandani]

During test of one IB card with guest VM, found that, msi is not initialized properly.

It turns out __write_msi_msg will do nothing if device current_state is not PCI_D0.
And, that pci device does not have pm_cap in guest VM.

There is an error in setting of power state to PCI_D0 in pci_enable_device(), but error is not returned for this.
Following is code flow:
pci_enable_device() -->  __pci_enable_device_flags() -->  do_pci_enable_device() -->  pci_set_power_state() -->  __pci_start_power_transition()
We have following condition inside __pci_start_power_transition():
        if (platform_pci_power_manageable(dev)) {
                error = platform_pci_set_power_state(dev, state);
                if (!error)
                        pci_update_current_state(dev, state);
        } else {
                error = -ENODEV;
                /* Fall back to PCI_D0 if native PM is not supported */
                if (!dev->pm_cap)
                        dev->current_state = PCI_D0;
        }

Here, from platform_pci_set_power_state(), acpi_pci_set_power_state() is getting called and that is failing with ENODEV because of following condition:
        if (!handle || ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0",&tmp)))
                return -ENODEV;

Because of that, pci_update_current_state() is not getting called.

With this patch, if device power state can not be set via platform_pci_set_power_state and that device does not have native pm support, then PCI device power state will be set to PCI_D0.

Signed-off-by: Ajaykumar Hotchandani<ajaykumar.hotchandani@xxxxxxxxxx>
Signed-off-by: Yinghai Lu<yinghai.lu@xxxxxxxxxx>
---
 drivers/pci/pci.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e9651f0..ca8c82d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -664,6 +664,9 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
                error = platform_pci_set_power_state(dev, state);
                if (!error)
                        pci_update_current_state(dev, state);
+               /* Fall back to PCI_D0 if native PM is not supported */
+               else if (!dev->pm_cap)
+                       dev->current_state = PCI_D0;
        } else {
                error = -ENODEV;
                /* Fall back to PCI_D0 if native PM is not supported */
--
1.7.5.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/