Re: PCIe can not rescan for new PCIe device ( FPGA board )

[Kenji Kaneshige]

Hello,

According to your dmesg output, pciehp driver doesn't detect any PCIe
hotplug slot. Can you send the following information?

 - ls -lR /sys/bus/pci/slots
 - lspci -vvvv (as root user)

Regards,
Kenji Kaneshige


(2011/10/11 17:11), Abdelghani Ouchabane wrote:
> 
>>>> After I plug my board in, I executed echo 1> /sys/bus/pci/rescan
>>>
>>>
>>
>> Can you try echo 1 > /sys/bus/pci/slots/XXX/power?
>> (XXX: slot number)
> Hallo Kenji,
> 
> I am still having the same problem after executing "echo 1 > /sys/bus/pci/slots/0000\:02\:00.0/power"
> 
>>
>>> It seems like a pciehp bug that you have to rescan explicitly. But
>>> I'm not a pciehp expert and I haven't looked at the code.
>>
>> The pciehp automatically scans the bus on presence changed event
>> (e.g. board is pluged in) if the hot-plug controller supports
>> surprise removal. Otherwise, you need to power on slot explicitly
>> by "echo 1 > /sys/bus/pci/slots/XXX/power". So one possibility is
>> that your controller doesn't support surprise removal. We can
>> check it by looking at the pciehp's debug output. Can you send
>> whole dmesg output?
> 
> I attached to you the whole dmesg log.
> 
> Cheers,
> Ghani
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/