Re: linux-next 20111025: warnings inrcu_idle_exit_common()/rcu_idle_enter_common()

From: Paul E. McKenney
Date: Mon Oct 31 2011 - 05:52:49 EST

Next message: Amit Shah: "Re: [PATCH] VirtioConsole support."
Previous message: Michael Neuling: "Re: powerpc 476, Little-endian, pte fault"
In reply to: Wu Fengguang: "linux-next 20111025: warnings inrcu_idle_exit_common()/rcu_idle_enter_common()"
Next in thread: Wu Fengguang: "Re: linux-next 20111025: warnings inrcu_idle_exit_common()/rcu_idle_enter_common()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, Oct 31, 2011 at 04:26:34PM +0800, Wu Fengguang wrote:
> Hi Paul,
>
> I got two warnings in rcutree.c. The last working kernels are
> linux-next 20111014 and linux v3.1.

Interesting. Could you please enable RCU event tracing at boot?

The RCU event tracing is at tracing/events/rcu/enable relative to
the debugfs mount point at runtime, if that helps.

Thanx, Paul

> [ 0.194593] ------------[ cut here ]------------
> [ 0.194707] lockdep: fixing up alternatives.
> [ 0.194730] #2
> [ 0.194731] smpboot cpu 2: start_ip = 97000
> [ 0.195737] WARNING: at /c/wfg/linux-next/kernel/rcutree.c:444 rcu_idle_exit_common+0xd2/0x117()
> [ 0.196325] Hardware name:
> [ 0.196603] Modules linked in:
> [ 0.196899] Pid: 0, comm: kworker/0:0 Not tainted 3.1.0-ioless-full-next-20111025+ #881
> [ 0.197459] Call Trace:
> [ 0.197699] <IRQ> [<ffffffff81074534>] warn_slowpath_common+0x85/0x9d
> [ 0.201075] [<ffffffff81074566>] warn_slowpath_null+0x1a/0x1c
> [ 0.201438] [<ffffffff810d5afd>] rcu_idle_exit_common+0xd2/0x117
> [ 0.201812] [<ffffffff810d5fff>] rcu_irq_enter+0x75/0xa2
> [ 0.202160] [<ffffffff8107ac7f>] irq_enter+0x1b/0x74
> [ 0.202496] [<ffffffff8106f29e>] scheduler_ipi+0x5e/0xd5
> [ 0.202845] [<ffffffff8104ce6b>] smp_reschedule_interrupt+0x2a/0x2c
> [ 0.203229] [<ffffffff8198bb73>] reschedule_interrupt+0x73/0x80
> [ 0.203598] <EOI> [<ffffffff8198661f>] ? notifier_call_chain+0x63/0x63
> [ 0.204030] [<ffffffff8103ce2b>] ? mwait_idle+0xef/0x175
> [ 0.204378] [<ffffffff8103ce22>] ? mwait_idle+0xe6/0x175
> [ 0.204727] [<ffffffff810351bb>] cpu_idle+0x91/0xb8
> [ 0.205068] [<ffffffff81978bd5>] start_secondary+0x1de/0x1e2
> [ 0.205454] ---[ end trace 4eaa2a86a8e2da22 ]---
> [ 0.205774] Dumping ftrace buffer:
> [ 0.205806] masked ExtINT on CPU#2
> [ 0.206327] (ftrace buffer empty)
> [ 0.206611] ------------[ cut here ]------------
> [ 0.206931] WARNING: at /c/wfg/linux-next/kernel/rcutree.c:359 rcu_idle_enter_common+0xb3/0x130()
> [ 0.207521] Hardware name:
> [ 0.207797] Modules linked in:
> [ 0.208093] Pid: 0, comm: kworker/0:0 Tainted: G W 3.1.0-ioless-full-next-20111025+ #881
> [ 0.208683] Call Trace:
> [ 0.208921] <IRQ> [<ffffffff81074534>] warn_slowpath_common+0x85/0x9d
> [ 0.209350] [<ffffffff81074566>] warn_slowpath_null+0x1a/0x1c
> [ 0.209713] [<ffffffff810d5bf5>] rcu_idle_enter_common+0xb3/0x130
> [ 0.210091] [<ffffffff810d5eb8>] rcu_irq_exit+0x6b/0x95
> [ 0.210436] [<ffffffff8107ad88>] irq_exit+0xb0/0xb2
> [ 0.210769] [<ffffffff8106f310>] scheduler_ipi+0xd0/0xd5
> [ 0.211118] [<ffffffff8104ce6b>] smp_reschedule_interrupt+0x2a/0x2c
> [ 0.211503] [<ffffffff8198bb73>] reschedule_interrupt+0x73/0x80
> [ 0.211871] <EOI> [<ffffffff8198661f>] ? notifier_call_chain+0x63/0x63
> [ 0.212303] [<ffffffff8103ce2b>] ? mwait_idle+0xef/0x175
> [ 0.212651] [<ffffffff8103ce22>] ? mwait_idle+0xe6/0x175
> [ 0.213000] [<ffffffff810351bb>] cpu_idle+0x91/0xb8
> [ 0.213331] [<ffffffff81978bd5>] start_secondary+0x1de/0x1e2
> [ 0.213692] ---[ end trace 4eaa2a86a8e2da23 ]---
>
> Below is the full dmesg. kconfig is also attached.
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 3.1.0-ioless-full-next-20111025+ (wfg@bee) (gcc version 4.5.0 (GCC) ) #881 SMP Mon Oct 31 01:03:49 CST 2011
> [ 0.000000] Command line: hpet=disable run=/home/wfg/ioless-balance_dirty_pages/test-each-fs.sh log_buf_len=8M debug sched_debug apic=debug dynamic_printk drm.debug=6 sysrq_always_enabled panic=10 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@xxxxxxxxxxx/00:30:48:fe:19:95 ip=192.168.1.52:192.168.1.11:192.168.1.1:255.255.255.0:fat:eth0:none nfsroot=192.168.1.11:/nfsroot/wfg,tcp,v3,nocto,nolock,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz-3.1.0-ioless-full-next-20111025+
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
> [ 0.000000] BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bcde3000 (usable)
> [ 0.000000] BIOS-e820: 00000000bcde3000 - 00000000bcffb000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000bcffb000 - 00000000bf6bd000 (usable)
> [ 0.000000] BIOS-e820: 00000000bf6bd000 - 00000000bf6bf000 (reserved)
> [ 0.000000] BIOS-e820: 00000000bf6bf000 - 00000000bf714000 (usable)
> [ 0.000000] BIOS-e820: 00000000bf714000 - 00000000bf7bf000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000bf7bf000 - 00000000bf7e7000 (usable)
> [ 0.000000] BIOS-e820: 00000000bf7e7000 - 00000000bf7ff000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
> [ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fd000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] DMI 2.5 present.
> [ 0.000000] DMI: /DX58SO, BIOS SOX5810J.86A.2127.2008.0914.1638 09/14/2008
> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
> [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
> [ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-DFFFF write-protect
> [ 0.000000] E0000-FFFFF uncachable
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask F80000000 write-back
> [ 0.000000] 1 base 080000000 mask FC0000000 write-back
> [ 0.000000] 2 disabled
> [ 0.000000] 3 disabled
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
> [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
> [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
> [ 0.000000] found SMP MP-table at [ffff8800000ff4c0] ff4c0
> [ 0.000000] mpc: ff4d0-ff6a8
> [ 0.000000] initial memory mapped : 0 - 20000000
> [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
> [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
> [ 0.000000] 0000000000 - 00bf800000 page 4k
> [ 0.000000] kernel direct mapping tables up to bf800000 @ 1fa02000-20000000
> [ 0.000000] log_buf_len: 8388608
> [ 0.000000] early log buf free: 258224(98%)
> [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
> [ 0.000000] ACPI: XSDT 00000000bf7fe120 0006C (v01 INTEL DX58SO 0000084F 01000013)
> [ 0.000000] ACPI: FACP 00000000bf7fd000 000F4 (v03 INTEL DX58SO 0000084F MSFT 0100000D)
> [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000450/0x0 (20110623/tbfadt-560)
> [ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8 (20110623/tbfadt-610)
> [ 0.000000] ACPI: DSDT 00000000bf7f8000 043CE (v02 INTEL DX58SO 0000084F MSFT 0100000D)
> [ 0.000000] ACPI: FACS 00000000bf726000 00040
> [ 0.000000] ACPI: APIC 00000000bf7f7000 00138 (v02 INTEL DX58SO 0000084F MSFT 0100000D)
> [ 0.000000] ACPI: WDDT 00000000bf7f6000 00040 (v01 INTEL DX58SO 0000084F MSFT 0100000D)
> [ 0.000000] ACPI: MCFG 00000000bf7f5000 0003C (v01 INTEL DX58SO 0000084F MSFT 0100000D)
> [ 0.000000] ACPI: ASF! 00000000bf7f4000 000AC (v32 INTEL DX58SO 0000084F MSFT 0100000D)
> [ 0.000000] ACPI: SSDT 00000000bf7ea000 070AC (v01 INTEL SSDT PM 0000084F MSFT 0100000D)
> [ 0.000000] ACPI: DMAR 00000000bf7e7000 00140 (v01 INTEL DX58SO 0000084F MSFT 0100000D)
> [ 0.000000] ACPI: WDTT 00000000bf7f2000 0020C (v01 INTEL DX58SO 0000084F MSFT 0100000D)
> [ 0.000000] ACPI: ASPT 00000000bf7f3000 00034 (v04 INTEL PerfTune 0000084F MSFT 0100000D)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000)
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at 0000000000000000-00000000bf800000
> [ 0.000000] Initmem setup node 0 0000000000000000-00000000bf800000
> [ 0.000000] NODE_DATA [00000000bf7e2000 - 00000000bf7e6fff]
> [ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800b9c00000-ffff8800bcbfffff] on node 0
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000010 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal empty
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[6] active PFN ranges
> [ 0.000000] 0: 0x00000010 -> 0x0000009c
> [ 0.000000] 0: 0x00000100 -> 0x000bcde3
> [ 0.000000] 0: 0x000bcffb -> 0x000bf6bd
> [ 0.000000] 0: 0x000bf6bf -> 0x000bf714
> [ 0.000000] 0: 0x000bf7bf -> 0x000bf7e7
> [ 0.000000] 0: 0x000bf7ff -> 0x000bf800
> [ 0.000000] On node 0 totalpages: 783535
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 5 pages reserved
> [ 0.000000] DMA zone: 3911 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 12192 pages used for memmap
> [ 0.000000] DMA32 zone: 767363 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 8, APIC INT 02
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 8, APIC INT 09
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 8, APIC INT 01
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 8, APIC INT 03
> [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 8, APIC INT 04
> [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 8, APIC INT 05
> [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 8, APIC INT 06
> [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 8, APIC INT 07
> [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 8, APIC INT 08
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 8, APIC INT 0a
> [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 8, APIC INT 0b
> [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 8, APIC INT 0c
> [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 8, APIC INT 0d
> [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 8, APIC INT 0e
> [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 8, APIC INT 0f
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
> [ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec00000)
> [ 0.000000] nr_irqs_gsi: 40
> [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
> [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
> [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
> [ 0.000000] PM: Registered nosave memory: 00000000bcde3000 - 00000000bcffb000
> [ 0.000000] PM: Registered nosave memory: 00000000bf6bd000 - 00000000bf6bf000
> [ 0.000000] PM: Registered nosave memory: 00000000bf714000 - 00000000bf7bf000
> [ 0.000000] PM: Registered nosave memory: 00000000bf7e7000 - 00000000bf7ff000
> [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 476 pages/cpu @ffff8800b7c00000 s1916992 r8192 d24512 u2097152
> [ 0.000000] pcpu-alloc: s1916992 r8192 d24512 u2097152 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
> [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 771274
> [ 0.000000] Policy zone: DMA32
> [ 0.000000] Kernel command line: hpet=disable run=/home/wfg/ioless-balance_dirty_pages/test-each-fs.sh log_buf_len=8M debug sched_debug apic=debug dynamic_printk drm.debug=6 sysrq_always_enabled panic=10 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@xxxxxxxxxxx/00:30:48:fe:19:95 ip=192.168.1.52:192.168.1.11:192.168.1.1:255.255.255.0:fat:eth0:none nfsroot=192.168.1.11:/nfsroot/wfg,tcp,v3,nocto,nolock,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz-3.1.0-ioless-full-next-20111025+
> [ 0.000000] sysrq: sysrq always enabled.
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Memory: 3012432k/3137536k available (9793k kernel code, 3396k absent, 121708k reserved, 5791k data, 2768k init)
> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU debugfs-based tracing is enabled.
> [ 0.000000] NR_IRQS:4352 nr_irqs:808 16
> [ 0.000000] Extended CMOS year: 2000
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] console [ttyS0] enabled
> [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
> [ 0.000000] ... MAX_LOCK_DEPTH: 48
> [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
> [ 0.000000] ... CLASSHASH_SIZE: 4096
> [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
> [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
> [ 0.000000] ... CHAINHASH_SIZE: 16384
> [ 0.000000] memory used by lock dependency info: 6335 kB
> [ 0.000000] per task-struct memory footprint: 2688 bytes
> [ 0.000000] allocated 25165824 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.001000] Fast TSC calibration using PIT
> [ 0.002000] Detected 3200.599 MHz processor.
> [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6401.19 BogoMIPS (lpj=3200599)
> [ 0.000703] pid_max: default: 32768 minimum: 301
> [ 0.001894] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> [ 0.003955] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> [ 0.004951] Mount-cache hash table entries: 256
> [ 0.005655] Initializing cgroup subsys debug
> [ 0.005963] Initializing cgroup subsys cpuacct
> [ 0.006294] Initializing cgroup subsys memory
> [ 0.006629] Initializing cgroup subsys devices
> [ 0.006943] Initializing cgroup subsys freezer
> [ 0.007267] Initializing cgroup subsys blkio
> [ 0.007629] CPU: Physical Processor ID: 0
> [ 0.007926] CPU: Processor Core ID: 0
> [ 0.008223] mce: CPU supports 9 MCE banks
> [ 0.008526] CPU0: Thermal monitoring enabled (TM1)
> [ 0.008862] using mwait in idle threads.
> [ 0.010012] ACPI: Core revision 20110623
> [ 0.021747] ftrace: allocating 38070 entries in 150 pages
> [ 0.030613] Getting VERSION: 60015
> [ 0.030889] Getting VERSION: 60015
> [ 0.031172] Getting ID: 0
> [ 0.031417] Getting ID: 0
> [ 0.031663] Switched APIC routing to physical flat.
> [ 0.031992] enabled ExtINT on CPU#0
> [ 0.032499] ENABLING IO-APIC IRQs
> [ 0.032771] init IO_APIC IRQs
> [ 0.033030] apic 8 pin 0 not connected
> [ 0.033334] IOAPIC[0]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0)
> [ 0.033897] IOAPIC[0]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0)
> [ 0.034467] IOAPIC[0]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0)
> [ 0.035029] IOAPIC[0]: Set routing entry (8-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:0)
> [ 0.035594] IOAPIC[0]: Set routing entry (8-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:0)
> [ 0.036158] IOAPIC[0]: Set routing entry (8-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:0)
> [ 0.036720] IOAPIC[0]: Set routing entry (8-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:0)
> [ 0.037286] IOAPIC[0]: Set routing entry (8-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:0)
> [ 0.037848] IOAPIC[0]: Set routing entry (8-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:0)
> [ 0.038413] IOAPIC[0]: Set routing entry (8-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:0)
> [ 0.038982] IOAPIC[0]: Set routing entry (8-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:0)
> [ 0.039553] IOAPIC[0]: Set routing entry (8-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:0)
> [ 0.040122] IOAPIC[0]: Set routing entry (8-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:0)
> [ 0.040689] IOAPIC[0]: Set routing entry (8-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:0)
> [ 0.041259] IOAPIC[0]: Set routing entry (8-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:0)
> [ 0.041824] apic 8 pin 16 not connected
> [ 0.042120] apic 8 pin 17 not connected
> [ 0.042412] apic 8 pin 18 not connected
> [ 0.042705] apic 8 pin 19 not connected
> [ 0.042998] apic 8 pin 20 not connected
> [ 0.043294] apic 8 pin 21 not connected
> [ 0.043587] apic 8 pin 22 not connected
> [ 0.043880] apic 8 pin 23 not connected
> [ 0.044309] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.054651] CPU0: Genuine Intel(R) CPU 000 @ 3.20GHz stepping 04
> [ 0.055132] Using local APIC timer interrupts.
> [ 0.055132] calibrating APIC timer ...
> [ 0.156670] ... lapic delta = 833239
> [ 0.156950] ... PM-Timer delta = 357901
> [ 0.157238] ... PM-Timer result ok
> [ 0.157512] ..... delta 833239
> [ 0.157772] ..... mult: 35792783
> [ 0.158040] ..... calibration result: 133318
> [ 0.158345] ..... CPU clock speed is 3199.0634 MHz.
> [ 0.158674] ..... host bus clock speed is 133.0318 MHz.
> [ 0.159028] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
> [ 0.159788] ... version: 3
> [ 0.160088] ... bit width: 48
> [ 0.160388] ... generic registers: 4
> [ 0.160685] ... value mask: 0000ffffffffffff
> [ 0.161032] ... max period: 000000007fffffff
> [ 0.161376] ... fixed-purpose events: 3
> [ 0.161674] ... event mask: 000000070000000f
> [ 0.162304] lockdep: fixing up alternatives.
> [ 0.162667] Booting Node 0, Processors #1
> [ 0.162886] smpboot cpu 1: start_ip = 97000
> [ 0.174423] masked ExtINT on CPU#1
> [ 0.194593] ------------[ cut here ]------------
> [ 0.194707] lockdep: fixing up alternatives.
> [ 0.194730] #2
> [ 0.194731] smpboot cpu 2: start_ip = 97000
> [ 0.195737] WARNING: at /c/wfg/linux-next/kernel/rcutree.c:444 rcu_idle_exit_common+0xd2/0x117()
> [ 0.196325] Hardware name:
> [ 0.196603] Modules linked in:
> [ 0.196899] Pid: 0, comm: kworker/0:0 Not tainted 3.1.0-ioless-full-next-20111025+ #881
> [ 0.197459] Call Trace:
> [ 0.197699] <IRQ> [<ffffffff81074534>] warn_slowpath_common+0x85/0x9d
> [ 0.201075] [<ffffffff81074566>] warn_slowpath_null+0x1a/0x1c
> [ 0.201438] [<ffffffff810d5afd>] rcu_idle_exit_common+0xd2/0x117
> [ 0.201812] [<ffffffff810d5fff>] rcu_irq_enter+0x75/0xa2
> [ 0.202160] [<ffffffff8107ac7f>] irq_enter+0x1b/0x74
> [ 0.202496] [<ffffffff8106f29e>] scheduler_ipi+0x5e/0xd5
> [ 0.202845] [<ffffffff8104ce6b>] smp_reschedule_interrupt+0x2a/0x2c
> [ 0.203229] [<ffffffff8198bb73>] reschedule_interrupt+0x73/0x80
> [ 0.203598] <EOI> [<ffffffff8198661f>] ? notifier_call_chain+0x63/0x63
> [ 0.204030] [<ffffffff8103ce2b>] ? mwait_idle+0xef/0x175
> [ 0.204378] [<ffffffff8103ce22>] ? mwait_idle+0xe6/0x175
> [ 0.204727] [<ffffffff810351bb>] cpu_idle+0x91/0xb8
> [ 0.205068] [<ffffffff81978bd5>] start_secondary+0x1de/0x1e2
> [ 0.205454] ---[ end trace 4eaa2a86a8e2da22 ]---
> [ 0.205774] Dumping ftrace buffer:
> [ 0.205806] masked ExtINT on CPU#2
> [ 0.206327] (ftrace buffer empty)
> [ 0.206611] ------------[ cut here ]------------
> [ 0.206931] WARNING: at /c/wfg/linux-next/kernel/rcutree.c:359 rcu_idle_enter_common+0xb3/0x130()
> [ 0.207521] Hardware name:
> [ 0.207797] Modules linked in:
> [ 0.208093] Pid: 0, comm: kworker/0:0 Tainted: G W 3.1.0-ioless-full-next-20111025+ #881
> [ 0.208683] Call Trace:
> [ 0.208921] <IRQ> [<ffffffff81074534>] warn_slowpath_common+0x85/0x9d
> [ 0.209350] [<ffffffff81074566>] warn_slowpath_null+0x1a/0x1c
> [ 0.209713] [<ffffffff810d5bf5>] rcu_idle_enter_common+0xb3/0x130
> [ 0.210091] [<ffffffff810d5eb8>] rcu_irq_exit+0x6b/0x95
> [ 0.210436] [<ffffffff8107ad88>] irq_exit+0xb0/0xb2
> [ 0.210769] [<ffffffff8106f310>] scheduler_ipi+0xd0/0xd5
> [ 0.211118] [<ffffffff8104ce6b>] smp_reschedule_interrupt+0x2a/0x2c
> [ 0.211503] [<ffffffff8198bb73>] reschedule_interrupt+0x73/0x80
> [ 0.211871] <EOI> [<ffffffff8198661f>] ? notifier_call_chain+0x63/0x63
> [ 0.212303] [<ffffffff8103ce2b>] ? mwait_idle+0xef/0x175
> [ 0.212651] [<ffffffff8103ce22>] ? mwait_idle+0xe6/0x175
> [ 0.213000] [<ffffffff810351bb>] cpu_idle+0x91/0xb8
> [ 0.213331] [<ffffffff81978bd5>] start_secondary+0x1de/0x1e2
> [ 0.213692] ---[ end trace 4eaa2a86a8e2da23 ]---
> [ 0.225972] lockdep: fixing up alternatives.
> [ 0.226304] #3
> [ 0.226395] smpboot cpu 3: start_ip = 97000
> [ 0.237931] masked ExtINT on CPU#3
> [ 0.258195] lockdep: fixing up alternatives.
> [ 0.258529] #4
> [ 0.258620] smpboot cpu 4: start_ip = 97000
> [ 0.270164] masked ExtINT on CPU#4
> [ 0.290438] lockdep: fixing up alternatives.
> [ 0.290774] #5
> [ 0.290866] smpboot cpu 5: start_ip = 97000
> [ 0.302399] masked ExtINT on CPU#5
> [ 0.322667] lockdep: fixing up alternatives.
> [ 0.323002] #6
> [ 0.323094] smpboot cpu 6: start_ip = 97000
> [ 0.334636] masked ExtINT on CPU#6
> [ 0.354901] lockdep: fixing up alternatives.
> [ 0.355236] #7
> [ 0.355328] smpboot cpu 7: start_ip = 97000
> [ 0.366862] masked ExtINT on CPU#7
> [ 0.387025] Brought up 8 CPUs
> [ 0.387289] Total of 8 processors activated (51209.58 BogoMIPS).
> [ 0.391026] CPU0 attaching sched-domain:
> [ 0.391327] domain 0: span 0,4 level SIBLING
> [ 0.391671] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
> [ 0.392199] domain 1: span 0-7 level MC
> [ 0.392533] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
> [ 0.393486] CPU1 attaching sched-domain:
> [ 0.393780] domain 0: span 1,5 level SIBLING
> [ 0.394124] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
> [ 0.394655] domain 1: span 0-7 level MC
> [ 0.394985] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
> [ 0.395936] CPU2 attaching sched-domain:
> [ 0.396232] domain 0: span 2,6 level SIBLING
> [ 0.396574] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
> [ 0.397101] domain 1: span 0-7 level MC
> [ 0.397433] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
> [ 0.398383] CPU3 attaching sched-domain:
> [ 0.398676] domain 0: span 3,7 level SIBLING
> [ 0.399018] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
> [ 0.399548] domain 1: span 0-7 level MC
> [ 0.399878] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
> [ 0.400827] CPU4 attaching sched-domain:
> [ 0.401121] domain 0: span 0,4 level SIBLING
> [ 0.401466] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
> [ 0.401994] domain 1: span 0-7 level MC
> [ 0.402326] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
> [ 0.403274] CPU5 attaching sched-domain:
> [ 0.403567] domain 0: span 1,5 level SIBLING
> [ 0.403909] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
> [ 0.404439] domain 1: span 0-7 level MC
> [ 0.404768] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
> [ 0.405718] CPU6 attaching sched-domain:
> [ 0.406011] domain 0: span 2,6 level SIBLING
> [ 0.406356] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
> [ 0.406882] domain 1: span 0-7 level MC
> [ 0.407214] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
> [ 0.408162] CPU7 attaching sched-domain:
> [ 0.408458] domain 0: span 3,7 level SIBLING
> [ 0.408800] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
> [ 0.409329] domain 1: span 0-7 level MC
> [ 0.409658] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
> [ 0.411054] devtmpfs: initialized
> [ 0.412327] PM: Registering ACPI NVS region at bcde3000 (2195456 bytes)
> [ 0.412779] PM: Registering ACPI NVS region at bf714000 (700416 bytes)
> [ 0.413831] xor: automatically using best checksumming function: generic_sse
> [ 0.419141] generic_sse: 11928.000 MB/sec
> [ 0.419448] xor: using function: generic_sse (11928.000 MB/sec)
> [ 0.419937] kworker/u:0 used greatest stack depth: 5608 bytes left
> [ 0.419965] RTC time: 15:08:07, date: 10/31/11
> [ 0.420049] NET: Registered protocol family 16
> [ 0.420946] kworker/u:0 used greatest stack depth: 5192 bytes left
> [ 0.421833] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> [ 0.422388] ACPI: bus type pci registered
> [ 0.422885] dca service started, version 1.12.1
> [ 0.423285] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> [ 0.423895] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
> [ 0.436051] PCI: Using configuration type 1 for base access
> [ 0.461151] bio: create slab <bio-0> at 0
> [ 0.477951] raid6: int64x1 3167 MB/s
> [ 0.494886] raid6: int64x2 3417 MB/s
> [ 0.511833] raid6: int64x4 2742 MB/s
> [ 0.528795] raid6: int64x8 2093 MB/s
> [ 0.545718] raid6: sse2x1 7921 MB/s
> [ 0.562653] raid6: sse2x2 9300 MB/s
> [ 0.579595] raid6: sse2x4 10710 MB/s
> [ 0.579882] raid6: using algorithm sse2x4 (10710 MB/s)
> [ 0.580304] ACPI: Added _OSI(Module Device)
> [ 0.580615] ACPI: Added _OSI(Processor Device)
> [ 0.580928] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.581251] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.585616] ACPI: EC: Look up EC in DSDT
> [ 0.606574] ACPI: Interpreter enabled
> [ 0.606860] ACPI: (supports S0 S1 S3 S4 S5)
> [ 0.607365] ACPI: Using IOAPIC for interrupt routing
> [ 0.620153] ACPI: No dock devices found.
> [ 0.620449] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 0.621650] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3d])
> [ 0.623257] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
> [ 0.623655] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
> [ 0.624047] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
> [ 0.624584] pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000cbfff]
> [ 0.625118] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfedfffff]
> [ 0.625658] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xf7ffffff]
> [ 0.626213] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
> [ 0.626655] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
> [ 0.627078] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> [ 0.627464] pci 0000:00:01.0: PME# disabled
> [ 0.627794] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
> [ 0.628219] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
> [ 0.628598] pci 0000:00:03.0: PME# disabled
> [ 0.628929] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
> [ 0.629354] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
> [ 0.629733] pci 0000:00:07.0: PME# disabled
> [ 0.630064] pci 0000:00:10.0: [8086:3425] type 0 class 0x000800
> [ 0.630515] pci 0000:00:10.1: [8086:3426] type 0 class 0x000800
> [ 0.630961] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
> [ 0.631404] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
> [ 0.631852] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
> [ 0.632292] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800
> [ 0.632741] pci 0000:00:19.0: [8086:10cc] type 0 class 0x000200
> [ 0.633128] pci 0000:00:19.0: reg 10: [mem 0xe0300000-0xe031ffff]
> [ 0.633514] pci 0000:00:19.0: reg 14: [mem 0xe0323000-0xe0323fff]
> [ 0.633897] pci 0000:00:19.0: reg 18: [io 0x2100-0x211f]
> [ 0.634304] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> [ 0.634685] pci 0000:00:19.0: PME# disabled
> [ 0.635008] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
> [ 0.635434] pci 0000:00:1a.0: reg 20: [io 0x20e0-0x20ff]
> [ 0.635836] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
> [ 0.636256] pci 0000:00:1a.1: reg 20: [io 0x20c0-0x20df]
> [ 0.636661] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
> [ 0.637080] pci 0000:00:1a.2: reg 20: [io 0x20a0-0x20bf]
> [ 0.640448] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
> [ 0.640836] pci 0000:00:1a.7: reg 10: [mem 0xe0322000-0xe03223ff]
> [ 0.641294] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> [ 0.641673] pci 0000:00:1a.7: PME# disabled
> [ 0.642000] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
> [ 0.642391] pci 0000:00:1b.0: reg 10: [mem 0xf7f00000-0xf7f03fff 64bit]
> [ 0.642853] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.643230] pci 0000:00:1b.0: PME# disabled
> [ 0.643557] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
> [ 0.643992] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.644369] pci 0000:00:1c.0: PME# disabled
> [ 0.644698] pci 0000:00:1c.1: [8086:3a42] type 1 class 0x000604
> [ 0.645135] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.645515] pci 0000:00:1c.1: PME# disabled
> [ 0.645843] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
> [ 0.646279] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [ 0.646662] pci 0000:00:1c.4: PME# disabled
> [ 0.646993] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
> [ 0.647416] pci 0000:00:1d.0: reg 20: [io 0x2080-0x209f]
> [ 0.647817] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
> [ 0.648237] pci 0000:00:1d.1: reg 20: [io 0x2060-0x207f]
> [ 0.648644] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
> [ 0.649063] pci 0000:00:1d.2: reg 20: [io 0x2040-0x205f]
> [ 0.649477] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
> [ 0.649865] pci 0000:00:1d.7: reg 10: [mem 0xe0321000-0xe03213ff]
> [ 0.650323] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.650704] pci 0000:00:1d.7: PME# disabled
> [ 0.651026] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
> [ 0.651471] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
> [ 0.651935] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
> [ 0.652317] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
> [ 0.652865] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
> [ 0.653457] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
> [ 0.653844] pci 0000:00:1f.2: reg 10: [io 0x2128-0x212f]
> [ 0.654201] pci 0000:00:1f.2: reg 14: [io 0x2134-0x2137]
> [ 0.654560] pci 0000:00:1f.2: reg 18: [io 0x2120-0x2127]
> [ 0.654915] pci 0000:00:1f.2: reg 1c: [io 0x2130-0x2133]
> [ 0.655271] pci 0000:00:1f.2: reg 20: [io 0x2020-0x203f]
> [ 0.655630] pci 0000:00:1f.2: reg 24: [mem 0xe0320000-0xe03207ff]
> [ 0.656041] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.656389] pci 0000:00:1f.2: PME# disabled
> [ 0.656708] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
> [ 0.657093] pci 0000:00:1f.3: reg 10: [mem 0xf7f04000-0xf7f040ff 64bit]
> [ 0.657512] pci 0000:00:1f.3: reg 20: [io 0x2000-0x201f]
> [ 0.657934] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [ 0.658341] pci 0000:02:00.0: [5333:9043] type 0 class 0x000300
> [ 0.658718] pci 0000:02:00.0: reg 10: [mem 0xe0200000-0xe027ffff]
> [ 0.659099] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff pref]
> [ 0.659527] pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
> [ 0.659939] pci 0000:02:00.0: supports D1 D2
> [ 0.660270] pci 0000:02:00.1: [5333:903f] type 0 class 0x000403
> [ 0.660651] pci 0000:02:00.1: reg 10: [mem 0xe0280000-0xe0283fff]
> [ 0.661093] pci 0000:02:00.1: supports D1 D2
> [ 0.661421] pci 0000:00:03.0: PCI bridge to [bus 02-02]
> [ 0.661767] pci 0000:00:03.0: bridge window [mem 0xe0200000-0xe02fffff]
> [ 0.662171] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.662768] pci 0000:00:07.0: PCI bridge to [bus 03-03]
> [ 0.663168] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
> [ 0.663571] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
> [ 0.663997] pci 0000:06:00.0: [11ab:6121] type 0 class 0x000101
> [ 0.664390] pci 0000:06:00.0: reg 10: [io 0x1018-0x101f]
> [ 0.664753] pci 0000:06:00.0: reg 14: [io 0x1024-0x1027]
> [ 0.665117] pci 0000:06:00.0: reg 18: [io 0x1010-0x1017]
> [ 0.665483] pci 0000:06:00.0: reg 1c: [io 0x1020-0x1023]
> [ 0.665847] pci 0000:06:00.0: reg 20: [io 0x1000-0x100f]
> [ 0.666212] pci 0000:06:00.0: reg 24: [mem 0xe0100000-0xe01003ff]
> [ 0.666652] pci 0000:06:00.0: supports D1
> [ 0.666950] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
> [ 0.667320] pci 0000:06:00.0: PME# disabled
> [ 0.667644] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
> [ 0.667988] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
> [ 0.668369] pci 0000:00:1c.4: bridge window [mem 0xe0100000-0xe01fffff]
> [ 0.668814] pci 0000:07:03.0: [104c:8023] type 0 class 0x000c00
> [ 0.669200] pci 0000:07:03.0: reg 10: [mem 0xe0004000-0xe00047ff]
> [ 0.669587] pci 0000:07:03.0: reg 14: [mem 0xe0000000-0xe0003fff]
> [ 0.670034] pci 0000:07:03.0: supports D1 D2
> [ 0.670342] pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
> [ 0.670715] pci 0000:07:03.0: PME# disabled
> [ 0.671072] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
> [ 0.671488] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe00fffff]
> [ 0.671892] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
> [ 0.672451] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
> [ 0.673007] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> [ 0.673591] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000cbfff] (subtractive decode)
> [ 0.674173] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfedfffff] (subtractive decode)
> [ 0.674757] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
> [ 0.675377] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.676647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
> [ 0.677268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
> [ 0.677737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
> [ 0.678202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG7._PRT]
> [ 0.678669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
> [ 0.679133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
> [ 0.679611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
> [ 0.680169] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19)
> [ 0.703276] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
> [ 0.704353] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
> [ 0.705428] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
> [ 0.706501] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
> [ 0.707576] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
> [ 0.708654] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
> [ 0.709729] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
> [ 0.710802] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
> [ 0.712112] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.712688] vgaarb: loaded
> [ 0.712940] vgaarb: bridge control possible 0000:02:00.0
> [ 0.713499] SCSI subsystem initialized
> [ 0.713965] libata version 3.00 loaded.
> [ 0.714528] usbcore: registered new interface driver usbfs
> [ 0.714943] usbcore: registered new interface driver hub
> [ 0.715368] usbcore: registered new device driver usb
> [ 0.716158] wmi: Mapper loaded
> [ 0.716485] Advanced Linux Sound Architecture Driver Version 1.0.24.
> [ 0.716869] PCI: Using ACPI for IRQ routing
> [ 0.718743] PCI: Discovered peer bus 3f
> [ 0.719121] pci 0000:3f:00.0: [8086:2c41] type 0 class 0x000600
> [ 0.719520] pci 0000:3f:00.1: [8086:2c01] type 0 class 0x000600
> [ 0.719922] pci 0000:3f:02.0: [8086:2c10] type 0 class 0x000600
> [ 0.720321] pci 0000:3f:02.1: [8086:2c11] type 0 class 0x000600
> [ 0.720720] pci 0000:3f:03.0: [8086:2c18] type 0 class 0x000600
> [ 0.721118] pci 0000:3f:03.1: [8086:2c19] type 0 class 0x000600
> [ 0.721514] pci 0000:3f:03.4: [8086:2c1c] type 0 class 0x000600
> [ 0.721912] pci 0000:3f:04.0: [8086:2c20] type 0 class 0x000600
> [ 0.722310] pci 0000:3f:04.1: [8086:2c21] type 0 class 0x000600
> [ 0.722704] pci 0000:3f:04.2: [8086:2c22] type 0 class 0x000600
> [ 0.723099] pci 0000:3f:04.3: [8086:2c23] type 0 class 0x000600
> [ 0.723505] pci 0000:3f:05.0: [8086:2c28] type 0 class 0x000600
> [ 0.723901] pci 0000:3f:05.1: [8086:2c29] type 0 class 0x000600
> [ 0.724299] pci 0000:3f:05.2: [8086:2c2a] type 0 class 0x000600
> [ 0.724693] pci 0000:3f:05.3: [8086:2c2b] type 0 class 0x000600
> [ 0.725092] pci 0000:3f:06.0: [8086:2c30] type 0 class 0x000600
> [ 0.725489] pci 0000:3f:06.1: [8086:2c31] type 0 class 0x000600
> [ 0.725887] pci 0000:3f:06.2: [8086:2c32] type 0 class 0x000600
> [ 0.726285] pci 0000:3f:06.3: [8086:2c33] type 0 class 0x000600
> [ 0.728115] PCI: pci_cache_line_size set to 64 bytes
> [ 0.728679] reserve RAM buffer: 000000000009cc00 - 000000000009ffff
> [ 0.728942] reserve RAM buffer: 00000000bcde3000 - 00000000bfffffff
> [ 0.729366] reserve RAM buffer: 00000000bf6bd000 - 00000000bfffffff
> [ 0.729783] reserve RAM buffer: 00000000bf714000 - 00000000bfffffff
> [ 0.730205] reserve RAM buffer: 00000000bf7e7000 - 00000000bfffffff
> [ 0.730621] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
> [ 0.759581] pnp: PnP ACPI init
> [ 0.760024] ACPI: bus type pnp registered
> [ 0.760929] pnp 00:00: [bus 00-3d]
> [ 0.761210] pnp 00:00: [io 0x0cf8-0x0cff]
> [ 0.761511] pnp 00:00: [io 0x0000-0x0cf7 window]
> [ 0.761838] pnp 00:00: [io 0x0d00-0xffff window]
> [ 0.762164] pnp 00:00: [mem 0x000a0000-0x000bffff window]
> [ 0.762514] pnp 00:00: [mem 0x000c4000-0x000cbfff window]
> [ 0.762863] pnp 00:00: [mem 0xfed40000-0xfedfffff window]
> [ 0.763216] pnp 00:00: [mem 0xd0000000-0xf7ffffff window]
> [ 0.763564] pnp 00:00: [mem 0x00000000 window]
> [ 0.764029] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
> [ 0.764699] pnp 00:01: [io 0x0000-0x000f]
> [ 0.765006] pnp 00:01: [io 0x0081-0x0083]
> [ 0.765306] pnp 00:01: [io 0x0087]
> [ 0.765584] pnp 00:01: [io 0x0089-0x008b]
> [ 0.765885] pnp 00:01: [io 0x008f]
> [ 0.766166] pnp 00:01: [io 0x00c0-0x00df]
> [ 0.766467] pnp 00:01: [dma 4]
> [ 0.766823] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 0.770182] pnp 00:02: [io 0x0070-0x0071]
> [ 0.770483] pnp 00:02: [io 0x0074-0x0077]
> [ 0.770788] IOAPIC[0]: Set routing entry (8-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:0)
> [ 0.771353] pnp 00:02: [irq 8]
> [ 0.771712] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.772125] pnp 00:03: [io 0x00f0]
> [ 0.772405] IOAPIC[0]: Set routing entry (8-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:0)
> [ 0.772976] pnp 00:03: [irq 13]
> [ 0.773335] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 0.773745] pnp 00:04: [io 0x0061]
> [ 0.774129] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
> [ 0.774536] pnp 00:05: [io 0x0500-0x053f]
> [ 0.774837] pnp 00:05: [io 0x0400-0x047f]
> [ 0.775143] pnp 00:05: [io 0x0092]
> [ 0.775420] pnp 00:05: [io 0x0680-0x06ff]
> [ 0.775720] pnp 00:05: [io 0x0010-0x001f]
> [ 0.776023] pnp 00:05: [io 0x0072-0x0073]
> [ 0.776322] pnp 00:05: [io 0x0080]
> [ 0.776599] pnp 00:05: [io 0x0084-0x0086]
> [ 0.776900] pnp 00:05: [io 0x0088]
> [ 0.777180] pnp 00:05: [io 0x008c-0x008e]
> [ 0.777479] pnp 00:05: [io 0x0090-0x009f]
> [ 0.777959] system 00:05: [io 0x0500-0x053f] has been reserved
> [ 0.778327] system 00:05: [io 0x0400-0x047f] has been reserved
> [ 0.778695] system 00:05: [io 0x0680-0x06ff] has been reserved
> [ 0.779068] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.779545] pnp 00:06: [io 0x0060]
> [ 0.779824] pnp 00:06: [io 0x0064]
> [ 0.780268] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.781212] pnp 00:07: [mem 0xfec00000-0xfec000ff]
> [ 0.781652] pnp 00:07: Plug and Play ACPI device, IDs PNP0003 (active)
> [ 0.782181] pnp: PnP ACPI: found 8 devices
> [ 0.782480] ACPI: ACPI bus type pnp unregistered
> [ 0.793721] Switching to clocksource acpi_pm
> [ 0.794163] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
> [ 0.794782] PCI: max bus depth: 1 pci_try_num: 2
> [ 0.795209] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [ 0.795562] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0290000-0xe029ffff pref]
> [ 0.796093] pci 0000:00:03.0: PCI bridge to [bus 02-02]
> [ 0.796445] pci 0000:00:03.0: bridge window [mem 0xe0200000-0xe02fffff]
> [ 0.796845] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.797412] pci 0000:00:07.0: PCI bridge to [bus 03-03]
> [ 0.797762] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
> [ 0.798114] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
> [ 0.798478] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
> [ 0.798821] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
> [ 0.799211] pci 0000:00:1c.4: bridge window [mem 0xe0100000-0xe01fffff]
> [ 0.799619] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
> [ 0.799964] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe00fffff]
> [ 0.800396] IOAPIC[0]: Set routing entry (8-16 -> 0x29 -> IRQ 16 Mode:1 Active:1 Dest:0)
> [ 0.800963] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.801380] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.801781] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.802206] IOAPIC[0]: Set routing entry (8-17 -> 0x41 -> IRQ 17 Mode:1 Active:1 Dest:0)
> [ 0.802773] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 0.803192] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> [ 0.803595] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 0.803998] pci 0000:00:1e.0: setting latency timer to 64
> [ 0.804356] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 0.804711] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 0.805066] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.805454] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000cbfff]
> [ 0.805834] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfedfffff]
> [ 0.806232] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xf7ffffff]
> [ 0.806612] pci_bus 0000:02: resource 1 [mem 0xe0200000-0xe02fffff]
> [ 0.806992] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.807532] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
> [ 0.807888] pci_bus 0000:06: resource 1 [mem 0xe0100000-0xe01fffff]
> [ 0.808281] pci_bus 0000:07: resource 1 [mem 0xe0000000-0xe00fffff]
> [ 0.808660] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
> [ 0.809014] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
> [ 0.809374] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.809754] pci_bus 0000:07: resource 7 [mem 0x000c4000-0x000cbfff]
> [ 0.810149] pci_bus 0000:07: resource 8 [mem 0xfed40000-0xfedfffff]
> [ 0.810529] pci_bus 0000:07: resource 9 [mem 0xd0000000-0xf7ffffff]
> [ 0.810908] pci_bus 0000:3f: resource 0 [io 0x0000-0xffff]
> [ 0.811275] pci_bus 0000:3f: resource 1 [mem 0x00000000-0xfffffffff]
> [ 0.811716] NET: Registered protocol family 2
> [ 0.812342] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 0.814790] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
> [ 0.818575] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes)
> [ 0.822170] TCP: Hash tables configured (established 524288 bind 65536)
> [ 0.822581] TCP reno registered
> [ 0.822914] UDP hash table entries: 2048 (order: 6, 393216 bytes)
> [ 0.823563] UDP-Lite hash table entries: 2048 (order: 6, 393216 bytes)
> [ 0.824319] NET: Registered protocol family 1
> [ 0.824841] RPC: Registered named UNIX socket transport module.
> [ 0.825229] RPC: Registered udp transport module.
> [ 0.825551] RPC: Registered tcp transport module.
> [ 0.825872] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 0.826312] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f10
> [ 0.826701] pci 0000:00:1a.0: Performing full reset
> [ 0.827060] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
> [ 0.827449] pci 0000:00:1a.1: Performing full reset
> [ 0.827795] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010
> [ 0.828199] pci 0000:00:1a.2: Performing full reset
> [ 0.828697] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10
> [ 0.829112] pci 0000:00:1d.0: Performing full reset
> [ 0.829464] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
> [ 0.829854] pci 0000:00:1d.1: Performing full reset
> [ 0.830215] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
> [ 0.830605] pci 0000:00:1d.2: Performing full reset
> [ 0.831092] pci 0000:02:00.0: Boot video device
> [ 0.831465] PCI: CLS 64 bytes, default 64
> [ 0.835647] Machine check injector initialized
> [ 0.837884] microcode: CPU0 sig=0x106a4, pf=0x2, revision=0x6
> [ 0.838263] microcode: CPU1 sig=0x106a4, pf=0x2, revision=0x6
> [ 0.838633] microcode: CPU2 sig=0x106a4, pf=0x2, revision=0x6
> [ 0.839010] microcode: CPU3 sig=0x106a4, pf=0x2, revision=0x6
> [ 0.839378] microcode: CPU4 sig=0x106a4, pf=0x2, revision=0x6
> [ 0.839751] microcode: CPU5 sig=0x106a4, pf=0x2, revision=0x6
> [ 0.840127] microcode: CPU6 sig=0x106a4, pf=0x2, revision=0x6
> [ 0.840498] microcode: CPU7 sig=0x106a4, pf=0x2, revision=0x6
> [ 0.840959] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
> [ 0.842023] audit: initializing netlink socket (disabled)
> [ 0.842395] type=2000 audit(1320073687.595:1): initialized
> [ 0.874810] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.887118] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> [ 0.888463] fuse init (API version 7.17)
> [ 0.889386] JFS: nTxBlock = 8192, nTxLock = 65536
> [ 0.893297] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
> [ 0.895921] NILFS version 2 loaded
> [ 0.897214] Btrfs loaded
> [ 0.897462] msgmni has been set to 5883
> [ 0.898927] async_tx: api initialized (async)
> [ 0.899440] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [ 0.900053] io scheduler noop registered
> [ 0.900347] io scheduler deadline registered
> [ 0.900791] io scheduler cfq registered (default)
> [ 0.901594] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
> [ 0.902146] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
> [ 0.902664] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
> [ 0.903365] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.904184] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
> [ 0.904763] ACPI: Sleep Button [SLPB]
> [ 0.905199] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 0.905739] ACPI: Power Button [PWRF]
> [ 0.906743] ACPI: acpi_idle registered with cpuidle
> [ 0.907482] Monitor-Mwait will be used to enter C-1 state
> [ 0.907904] Monitor-Mwait will be used to enter C-3 state
> [ 0.915347] ioatdma: Intel(R) QuickData Technology Driver 4.00
> [ 0.958791] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.974672] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
> [ 1.022725] Initializing Nozomi driver 2.1d
> [ 1.023527] Non-volatile memory driver v1.3
> [ 1.024273] Linux agpgart interface v0.103
> [ 1.024670] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
> [ 1.025265] Hangcheck: Using getrawmonotonic().
> [ 1.025659] [drm] Initialized drm 1.1.0 20060810
> [ 1.025979] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
> [ 1.831038] Refined TSC clocksource calibration: 3200.113 MHz.
> [ 1.831406] Switching to clocksource tsc
> [ 4.036175] floppy0: no floppy controllers found
> [ 4.036642] ------------[ cut here ]------------
> [ 4.036966] WARNING: at /c/wfg/linux-next/drivers/block/floppy.c:2929 do_fd_request+0x37/0xaa()
> [ 4.037553] Hardware name:
> [ 4.037831] VFS: do_fd_request called on non-open device
> [ 4.038176] Modules linked in:
> [ 4.038472] Pid: 1, comm: swapper Tainted: G W 3.1.0-ioless-full-next-20111025+ #881
> [ 4.039052] Call Trace:
> [ 4.039294] [<ffffffff81074534>] warn_slowpath_common+0x85/0x9d
> [ 4.042617] [<ffffffff810745ef>] warn_slowpath_fmt+0x46/0x48
> [ 4.042979] [<ffffffff813ea19a>] ? blk_throtl_drain+0xf6/0x105
> [ 4.043347] [<ffffffff819830be>] ? _raw_spin_unlock_irq+0x30/0x3c
> [ 4.043724] [<ffffffff81519bcd>] do_fd_request+0x37/0xaa
> [ 4.044073] [<ffffffff813d78a6>] __blk_run_queue+0x1e/0x20
> [ 4.044428] [<ffffffff813dcdae>] blk_drain_queue+0x41/0x7a
> [ 4.044783] [<ffffffff813dcf0c>] blk_cleanup_queue+0x125/0x184
> [ 4.045152] [<ffffffff8213eb69>] floppy_init+0xd9c/0xdc2
> [ 4.045501] [<ffffffff8213ddcd>] ? daring+0x65/0x65
> [ 4.045834] [<ffffffff810002f7>] do_one_initcall+0x7f/0x140
> [ 4.046193] [<ffffffff8210fc16>] kernel_init+0xcb/0x14f
> [ 4.046539] [<ffffffff8198bf04>] kernel_thread_helper+0x4/0x10
> [ 4.046907] [<ffffffff81983334>] ? retint_restore_args+0x13/0x13
> [ 4.047280] [<ffffffff8210fb4b>] ? start_kernel+0x390/0x390
> [ 4.047637] [<ffffffff8198bf00>] ? gs_change+0x13/0x13
> [ 4.047979] ---[ end trace 4eaa2a86a8e2da24 ]---
> [ 4.048424] ------------[ cut here ]------------
> [ 4.048745] WARNING: at /c/wfg/linux-next/drivers/block/floppy.c:2929 do_fd_request+0x37/0xaa()
> [ 4.049329] Hardware name:
> [ 4.049606] VFS: do_fd_request called on non-open device
> [ 4.049950] Modules linked in:
> [ 4.050245] Pid: 1, comm: swapper Tainted: G W 3.1.0-ioless-full-next-20111025+ #881
> [ 4.050824] Call Trace:
> [ 4.051064] [<ffffffff81074534>] warn_slowpath_common+0x85/0x9d
> [ 4.051434] [<ffffffff810745ef>] warn_slowpath_fmt+0x46/0x48
> [ 4.051795] [<ffffffff813ea19a>] ? blk_throtl_drain+0xf6/0x105
> [ 4.052162] [<ffffffff819830be>] ? _raw_spin_unlock_irq+0x30/0x3c
> [ 4.052539] [<ffffffff81519bcd>] do_fd_request+0x37/0xaa
> [ 4.052888] [<ffffffff813d78a6>] __blk_run_queue+0x1e/0x20
> [ 4.053242] [<ffffffff813dcdae>] blk_drain_queue+0x41/0x7a
> [ 4.053597] [<ffffffff813dcf0c>] blk_cleanup_queue+0x125/0x184
> [ 4.053965] [<ffffffff8213eb69>] floppy_init+0xd9c/0xdc2
> [ 4.054313] [<ffffffff8213ddcd>] ? daring+0x65/0x65
> [ 4.054646] [<ffffffff810002f7>] do_one_initcall+0x7f/0x140
> [ 4.055003] [<ffffffff8210fc16>] kernel_init+0xcb/0x14f
> [ 4.055348] [<ffffffff8198bf04>] kernel_thread_helper+0x4/0x10
> [ 4.055715] [<ffffffff81983334>] ? retint_restore_args+0x13/0x13
> [ 4.056089] [<ffffffff8210fb4b>] ? start_kernel+0x390/0x390
> [ 4.056446] [<ffffffff8198bf00>] ? gs_change+0x13/0x13
> [ 4.056787] ---[ end trace 4eaa2a86a8e2da25 ]---
> [ 4.057155] ------------[ cut here ]------------
> [ 4.057474] WARNING: at /c/wfg/linux-next/drivers/block/floppy.c:2929 do_fd_request+0x37/0xaa()
> [ 4.058058] Hardware name:
> [ 4.058334] VFS: do_fd_request called on non-open device
> [ 4.058678] Modules linked in:
> [ 4.058972] Pid: 1, comm: swapper Tainted: G W 3.1.0-ioless-full-next-20111025+ #881
> [ 4.059550] Call Trace:
> [ 4.059790] [<ffffffff81074534>] warn_slowpath_common+0x85/0x9d
> [ 4.060161] [<ffffffff810745ef>] warn_slowpath_fmt+0x46/0x48
> [ 4.060523] [<ffffffff813ea19a>] ? blk_throtl_drain+0xf6/0x105
> [ 4.060891] [<ffffffff819830be>] ? _raw_spin_unlock_irq+0x30/0x3c
> [ 4.061268] [<ffffffff81519bcd>] do_fd_request+0x37/0xaa
> [ 4.061617] [<ffffffff813d78a6>] __blk_run_queue+0x1e/0x20
> [ 4.061973] [<ffffffff813dcdae>] blk_drain_queue+0x41/0x7a
> [ 4.062328] [<ffffffff813dcf0c>] blk_cleanup_queue+0x125/0x184
> [ 4.062697] [<ffffffff8213eb69>] floppy_init+0xd9c/0xdc2
> [ 4.063046] [<ffffffff8213ddcd>] ? daring+0x65/0x65
> [ 4.063379] [<ffffffff810002f7>] do_one_initcall+0x7f/0x140
> [ 4.063738] [<ffffffff8210fc16>] kernel_init+0xcb/0x14f
> [ 4.064084] [<ffffffff8198bf04>] kernel_thread_helper+0x4/0x10
> [ 4.064451] [<ffffffff81983334>] ? retint_restore_args+0x13/0x13
> [ 4.064827] [<ffffffff8210fb4b>] ? start_kernel+0x390/0x390
> [ 4.065185] [<ffffffff8198bf00>] ? gs_change+0x13/0x13
> [ 4.065528] ---[ end trace 4eaa2a86a8e2da26 ]---
> [ 4.065895] ------------[ cut here ]------------
> [ 4.066216] WARNING: at /c/wfg/linux-next/drivers/block/floppy.c:2929 do_fd_request+0x37/0xaa()
> [ 4.066802] Hardware name:
> [ 4.067081] VFS: do_fd_request called on non-open device
> [ 4.067427] Modules linked in:
> [ 4.067722] Pid: 1, comm: swapper Tainted: G W 3.1.0-ioless-full-next-20111025+ #881
> [ 4.068300] Call Trace:
> [ 4.068540] [<ffffffff81074534>] warn_slowpath_common+0x85/0x9d
> [ 4.068910] [<ffffffff810745ef>] warn_slowpath_fmt+0x46/0x48
> [ 4.069270] [<ffffffff813ea19a>] ? blk_throtl_drain+0xf6/0x105
> [ 4.069637] [<ffffffff819830be>] ? _raw_spin_unlock_irq+0x30/0x3c
> [ 4.070014] [<ffffffff81519bcd>] do_fd_request+0x37/0xaa
> [ 4.070362] [<ffffffff813d78a6>] __blk_run_queue+0x1e/0x20
> [ 4.070717] [<ffffffff813dcdae>] blk_drain_queue+0x41/0x7a
> [ 4.071071] [<ffffffff813dcf0c>] blk_cleanup_queue+0x125/0x184
> [ 4.071439] [<ffffffff8213eb69>] floppy_init+0xd9c/0xdc2
> [ 4.071788] [<ffffffff8213ddcd>] ? daring+0x65/0x65
> [ 4.072121] [<ffffffff810002f7>] do_one_initcall+0x7f/0x140
> [ 4.072478] [<ffffffff8210fc16>] kernel_init+0xcb/0x14f
> [ 4.072823] [<ffffffff8198bf04>] kernel_thread_helper+0x4/0x10
> [ 4.073190] [<ffffffff81983334>] ? retint_restore_args+0x13/0x13
> [ 4.073564] [<ffffffff8210fb4b>] ? start_kernel+0x390/0x390
> [ 4.073922] [<ffffffff8198bf00>] ? gs_change+0x13/0x13
> [ 4.074263] ---[ end trace 4eaa2a86a8e2da27 ]---
> [ 4.074629] ------------[ cut here ]------------
> [ 4.074949] WARNING: at /c/wfg/linux-next/drivers/block/floppy.c:2929 do_fd_request+0x37/0xaa()
> [ 4.075534] Hardware name:
> [ 4.075811] VFS: do_fd_request called on non-open device
> [ 4.076155] Modules linked in:
> [ 4.076449] Pid: 1, comm: swapper Tainted: G W 3.1.0-ioless-full-next-20111025+ #881
> [ 4.077026] Call Trace:
> [ 4.077267] [<ffffffff81074534>] warn_slowpath_common+0x85/0x9d
> [ 4.077638] [<ffffffff810745ef>] warn_slowpath_fmt+0x46/0x48
> [ 4.078001] [<ffffffff813ea19a>] ? blk_throtl_drain+0xf6/0x105
> [ 4.078369] [<ffffffff819830be>] ? _raw_spin_unlock_irq+0x30/0x3c
> [ 4.078746] [<ffffffff81519bcd>] do_fd_request+0x37/0xaa
> [ 4.079096] [<ffffffff813d78a6>] __blk_run_queue+0x1e/0x20
> [ 4.079452] [<ffffffff813dcdae>] blk_drain_queue+0x41/0x7a
> [ 4.079807] [<ffffffff813dcf0c>] blk_cleanup_queue+0x125/0x184
> [ 4.080176] [<ffffffff8213eb69>] floppy_init+0xd9c/0xdc2
> [ 4.080525] [<ffffffff8213ddcd>] ? daring+0x65/0x65
> [ 4.080858] [<ffffffff810002f7>] do_one_initcall+0x7f/0x140
> [ 4.081217] [<ffffffff8210fc16>] kernel_init+0xcb/0x14f
> [ 4.081563] [<ffffffff8198bf04>] kernel_thread_helper+0x4/0x10
> [ 4.081932] [<ffffffff81983334>] ? retint_restore_args+0x13/0x13
> [ 4.082305] [<ffffffff8210fb4b>] ? start_kernel+0x390/0x390
> [ 4.082663] [<ffffffff8198bf00>] ? gs_change+0x13/0x13
> [ 4.083003] ---[ end trace 4eaa2a86a8e2da28 ]---
> [ 4.083366] ------------[ cut here ]------------
> [ 4.083685] WARNING: at /c/wfg/linux-next/drivers/block/floppy.c:2929 do_fd_request+0x37/0xaa()
> [ 4.084271] Hardware name:
> [ 4.084548] VFS: do_fd_request called on non-open device
> [ 4.084893] Modules linked in:
> [ 4.085187] Pid: 1, comm: swapper Tainted: G W 3.1.0-ioless-full-next-20111025+ #881
> [ 4.085766] Call Trace:
> [ 4.086006] [<ffffffff81074534>] warn_slowpath_common+0x85/0x9d
> [ 4.086376] [<ffffffff810745ef>] warn_slowpath_fmt+0x46/0x48
> [ 4.086737] [<ffffffff813ea19a>] ? blk_throtl_drain+0xf6/0x105
> [ 4.087104] [<ffffffff819830be>] ? _raw_spin_unlock_irq+0x30/0x3c
> [ 4.087481] [<ffffffff81519bcd>] do_fd_request+0x37/0xaa
> [ 4.087829] [<ffffffff813d78a6>] __blk_run_queue+0x1e/0x20
> [ 4.088184] [<ffffffff813dcdae>] blk_drain_queue+0x41/0x7a
> [ 4.088539] [<ffffffff813dcf0c>] blk_cleanup_queue+0x125/0x184
> [ 4.088907] [<ffffffff8213eb69>] floppy_init+0xd9c/0xdc2
> [ 4.089255] [<ffffffff8213ddcd>] ? daring+0x65/0x65
> [ 4.089588] [<ffffffff810002f7>] do_one_initcall+0x7f/0x140
> [ 4.089946] [<ffffffff8210fc16>] kernel_init+0xcb/0x14f
> [ 4.090290] [<ffffffff8198bf04>] kernel_thread_helper+0x4/0x10
> [ 4.090657] [<ffffffff81983334>] ? retint_restore_args+0x13/0x13
> [ 4.091031] [<ffffffff8210fb4b>] ? start_kernel+0x390/0x390
> [ 4.091389] [<ffffffff8198bf00>] ? gs_change+0x13/0x13
> [ 4.091730] ---[ end trace 4eaa2a86a8e2da29 ]---
> [ 4.092093] ------------[ cut here ]------------
> [ 4.092413] WARNING: at /c/wfg/linux-next/drivers/block/floppy.c:2929 do_fd_request+0x37/0xaa()
> [ 4.092997] Hardware name:
> [ 4.093274] VFS: do_fd_request called on non-open device
> [ 4.093619] Modules linked in:
> [ 4.093913] Pid: 1, comm: swapper Tainted: G W 3.1.0-ioless-full-next-20111025+ #881
> [ 4.094491] Call Trace:
> [ 4.094732] [<ffffffff81074534>] warn_slowpath_common+0x85/0x9d
> [ 4.095104] [<ffffffff810745ef>] warn_slowpath_fmt+0x46/0x48
> [ 4.095465] [<ffffffff813ea19a>] ? blk_throtl_drain+0xf6/0x105
> [ 4.095834] [<ffffffff819830be>] ? _raw_spin_unlock_irq+0x30/0x3c
> [ 4.096212] [<ffffffff81519bcd>] do_fd_request+0x37/0xaa
> [ 4.096560] [<ffffffff813d78a6>] __blk_run_queue+0x1e/0x20
> [ 4.096914] [<ffffffff813dcdae>] blk_drain_queue+0x41/0x7a
> [ 4.097268] [<ffffffff813dcf0c>] blk_cleanup_queue+0x125/0x184
> [ 4.097636] [<ffffffff8213eb69>] floppy_init+0xd9c/0xdc2
> [ 4.097985] [<ffffffff8213ddcd>] ? daring+0x65/0x65
> [ 4.098319] [<ffffffff810002f7>] do_one_initcall+0x7f/0x140
> [ 4.098679] [<ffffffff8210fc16>] kernel_init+0xcb/0x14f
> [ 4.099025] [<ffffffff8198bf04>] kernel_thread_helper+0x4/0x10
> [ 4.099393] [<ffffffff81983334>] ? retint_restore_args+0x13/0x13
> [ 4.099768] [<ffffffff8210fb4b>] ? start_kernel+0x390/0x390
> [ 4.100126] [<ffffffff8198bf00>] ? gs_change+0x13/0x13
> [ 4.100469] ---[ end trace 4eaa2a86a8e2da2a ]---
> [ 4.100833] ------------[ cut here ]------------
> [ 4.101154] WARNING: at /c/wfg/linux-next/drivers/block/floppy.c:2929 do_fd_request+0x37/0xaa()
> [ 4.101740] Hardware name:
> [ 4.102018] VFS: do_fd_request called on non-open device
> [ 4.102363] Modules linked in:
> [ 4.102658] Pid: 1, comm: swapper Tainted: G W 3.1.0-ioless-full-next-20111025+ #881
> [ 4.106193] Call Trace:
> [ 4.106432] [<ffffffff81074534>] warn_slowpath_common+0x85/0x9d
> [ 4.106804] [<ffffffff810745ef>] warn_slowpath_fmt+0x46/0x48
> [ 4.107165] [<ffffffff813ea19a>] ? blk_throtl_drain+0xf6/0x105
> [ 4.107532] [<ffffffff819830be>] ? _raw_spin_unlock_irq+0x30/0x3c
> [ 4.107909] [<ffffffff81519bcd>] do_fd_request+0x37/0xaa
> [ 4.108257] [<ffffffff813d78a6>] __blk_run_queue+0x1e/0x20
> [ 4.108612] [<ffffffff813dcdae>] blk_drain_queue+0x41/0x7a
> [ 4.108967] [<ffffffff813dcf0c>] blk_cleanup_queue+0x125/0x184
> [ 4.109334] [<ffffffff8213eb69>] floppy_init+0xd9c/0xdc2
> [ 4.109683] [<ffffffff8213ddcd>] ? daring+0x65/0x65
> [ 4.110015] [<ffffffff810002f7>] do_one_initcall+0x7f/0x140
> [ 4.110373] [<ffffffff8210fc16>] kernel_init+0xcb/0x14f
> [ 4.110718] [<ffffffff8198bf04>] kernel_thread_helper+0x4/0x10
> [ 4.111085] [<ffffffff81983334>] ? retint_restore_args+0x13/0x13
> [ 4.111459] [<ffffffff8210fb4b>] ? start_kernel+0x390/0x390
> [ 4.111817] [<ffffffff8198bf00>] ? gs_change+0x13/0x13
> [ 4.112157] ---[ end trace 4eaa2a86a8e2da2b ]---
> [ 4.115669] brd: module loaded
> [ 4.117641] loop: module loaded
> [ 4.118381] Loading iSCSI transport class v2.0-870.
> [ 4.119313] Loading Adaptec I2O RAID: Version 2.4 Build 5go
> [ 4.119667] Detecting Adaptec I2O RAID controllers...
> [ 4.120182] Adaptec aacraid driver 1.1-7[28000]-ms
> [ 4.121074] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
> [ 4.121646] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.07-k.
> [ 4.122373] iscsi: registered transport (qla4xxx)
> [ 4.122771] QLogic iSCSI HBA Driver
> [ 4.123131] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
> [ 4.123736] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
> [ 4.124223] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
> [ 4.124686] mpt2sas version 09.100.00.01 loaded
> [ 4.125373] ahci 0000:00:1f.2: version 3.0
> [ 4.125702] IOAPIC[0]: Set routing entry (8-19 -> 0x61 -> IRQ 19 Mode:1 Active:1 Dest:0)
> [ 4.126272] ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> [ 4.126717] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
> [ 4.127129] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
> [ 4.127696] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
> [ 4.128259] ahci 0000:00:1f.2: setting latency timer to 64
> [ 4.139104] scsi0 : ahci
> [ 4.139542] scsi1 : ahci
> [ 4.139949] scsi2 : ahci
> [ 4.140351] scsi3 : ahci
> [ 4.140755] scsi4 : ahci
> [ 4.141160] scsi5 : ahci
> [ 4.141817] ata1: SATA max UDMA/133 abar m2048@0xe0320000 port 0xe0320100 irq 43
> [ 4.142356] ata2: SATA max UDMA/133 abar m2048@0xe0320000 port 0xe0320180 irq 43
> [ 4.142898] ata3: SATA max UDMA/133 abar m2048@0xe0320000 port 0xe0320200 irq 43
> [ 4.143439] ata4: SATA max UDMA/133 abar m2048@0xe0320000 port 0xe0320280 irq 43
> [ 4.143981] ata5: SATA max UDMA/133 abar m2048@0xe0320000 port 0xe0320300 irq 43
> [ 4.144521] ata6: SATA max UDMA/133 abar m2048@0xe0320000 port 0xe0320380 irq 43
> [ 4.145092] ahci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 4.145506] ahci 0000:06:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.
> [ 4.146168] ahci 0000:06:00.0: controller can't do NCQ, turning off CAP_NCQ
> [ 4.146573] ahci 0000:06:00.0: controller can't do PMP, turning off CAP_PMP
> [ 4.146982] ahci 0000:06:00.0: masking port_map 0x7 -> 0x3
> [ 4.147350] ahci: SSS flag set, parallel bus scan disabled
> [ 4.147746] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode
> [ 4.148309] ahci 0000:06:00.0: flags: 64bit stag led slum part
> [ 4.149519] scsi6 : ahci
> [ 4.149940] scsi7 : ahci
> [ 4.150346] scsi8 : ahci
> [ 4.150736] ata7: SATA max UDMA/133 abar m1024@0xe0100000 port 0xe0100100 irq 16
> [ 4.151276] ata8: SATA max UDMA/133 abar m1024@0xe0100000 port 0xe0100180 irq 16
> [ 4.151816] ata9: DUMMY
> [ 4.155090] tun: Universal TUN/TAP device driver, 1.6
> [ 4.155426] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
> [ 4.156041] Atheros(R) L2 Ethernet Driver - version 2.2.3
> [ 4.156391] Copyright (c) 2007 Atheros Corporation.
> [ 4.157062] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
> [ 4.157749] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
> [ 4.158123] e100: Copyright(c) 1999-2006 Intel Corporation
> [ 4.158564] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
> [ 4.158977] e1000: Copyright (c) 1999-2006 Intel Corporation.
> [ 4.159425] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
> [ 4.159793] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
> [ 4.160186] IOAPIC[0]: Set routing entry (8-20 -> 0x71 -> IRQ 20 Mode:1 Active:1 Dest:0)
> [ 4.160756] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> [ 4.161167] e1000e 0000:00:19.0: setting latency timer to 64
> [ 4.161633] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
> [ 4.351667] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:79:88:54
> [ 4.352232] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
> [ 4.352668] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
> [ 4.353162] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
> [ 4.353555] Copyright (c) 2007-2011 Intel Corporation.
> [ 4.353980] Intel(R) Gigabit Virtual Function Network Driver - version 2.0.1-k
> [ 4.354518] Copyright (c) 2009 - 2011 Intel Corporation.
> [ 4.354950] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.6.7-k
> [ 4.355501] ixgbe: Copyright (c) 1999-2011 Intel Corporation.
> [ 4.355950] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
> [ 4.356367] ixgb: Copyright (c) 1999-2008 Intel Corporation.
> [ 4.356893] jme: JMicron JMC2XX ethernet driver version 1.0.8
> [ 4.357424] sky2: driver version 1.29
> [ 4.358188] usbcore: registered new interface driver catc
> [ 4.358538] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
> [ 4.358961] usbcore: registered new interface driver kaweth
> [ 4.359321] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
> [ 4.359921] usbcore: registered new interface driver pegasus
> [ 4.360287] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
> [ 4.360752] usbcore: registered new interface driver rtl8150
> [ 4.361180] usbcore: registered new interface driver asix
> [ 4.361585] usbcore: registered new interface driver cdc_ether
> [ 4.362005] usbcore: registered new interface driver cdc_eem
> [ 4.362424] usbcore: registered new interface driver dm9601
> [ 4.362842] usbcore: registered new interface driver smsc75xx
> [ 4.363273] usbcore: registered new interface driver smsc95xx
> [ 4.363689] usbcore: registered new interface driver gl620a
> [ 4.364109] usbcore: registered new interface driver net1080
> [ 4.364522] usbcore: registered new interface driver plusb
> [ 4.364929] usbcore: registered new interface driver rndis_host
> [ 4.365360] usbcore: registered new interface driver cdc_subset
> [ 4.365786] usbcore: registered new interface driver zaurus
> [ 4.366204] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
> [ 4.366802] usbcore: registered new interface driver int51x1
> [ 4.367163] cdc_ncm: 04-Aug-2011
> [ 4.367488] usbcore: registered new interface driver cdc_ncm
> [ 4.367846] Fusion MPT base driver 3.04.20
> [ 4.368150] Copyright (c) 1999-2008 LSI Corporation
> [ 4.368486] Fusion MPT SPI Host driver 3.04.20
> [ 4.368887] Fusion MPT FC Host driver 3.04.20
> [ 4.369291] Fusion MPT SAS Host driver 3.04.20
> [ 4.369695] Fusion MPT misc device (ioctl) driver 3.04.20
> [ 4.370132] mptctl: Registered with Fusion MPT base driver
> [ 4.370484] mptctl: /dev/mptctl @ (major,minor=10,220)
> [ 4.370925] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 4.371319] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
> [ 4.371725] IOAPIC[0]: Set routing entry (8-18 -> 0x81 -> IRQ 18 Mode:1 Active:1 Dest:0)
> [ 4.372296] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 4.372718] ehci_hcd 0000:00:1a.7: setting latency timer to 64
> [ 4.373086] ehci_hcd 0000:00:1a.7: EHCI Host Controller
> [ 4.373487] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file 'devices'
> [ 4.374036] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001'
> [ 4.374456] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
> [ 4.375000] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
> [ 4.375602] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
> [ 4.376252] ehci_hcd 0000:00:1a.7: debug port 1
> [ 4.376571] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
> [ 4.381047] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
> [ 4.381446] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
> [ 4.381828] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0322000
> [ 4.382191] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
> [ 4.386642] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
> [ 4.393010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> [ 4.393435] usb usb1: default language 0x0409
> [ 4.393753] usb usb1: udev 1, busnum 1, minor = 0
> [ 4.394081] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 4.394481] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.395016] usb usb1: Product: EHCI Host Controller
> [ 4.395345] usb usb1: Manufacturer: Linux 3.1.0-ioless-full-next-20111025+ ehci_hcd
> [ 4.398849] usb usb1: SerialNumber: 0000:00:1a.7
> [ 4.399324] usb usb1: usb_probe_device
> [ 4.399613] usb usb1: configuration #1 chosen from 1 choice
> [ 4.399997] usb usb1: adding 1-0:1.0 (config #1, interface 0)
> [ 4.400446] hub 1-0:1.0: usb_probe_interface
> [ 4.400753] hub 1-0:1.0: usb_probe_interface - got id
> [ 4.401094] hub 1-0:1.0: USB hub found
> [ 4.401385] hub 1-0:1.0: 6 ports detected
> [ 4.401682] hub 1-0:1.0: standalone hub
> [ 4.401976] hub 1-0:1.0: no power switching (usb 1.0)
> [ 4.402310] hub 1-0:1.0: individual port over-current protection
> [ 4.402681] hub 1-0:1.0: power on to power good time: 20ms
> [ 4.403051] hub 1-0:1.0: local power source is good
> [ 4.403379] hub 1-0:1.0: trying to enable port power on non-switchable hub
> [ 4.403837] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001'
> [ 4.404364] IOAPIC[0]: Set routing entry (8-23 -> 0x89 -> IRQ 23 Mode:1 Active:1 Dest:0)
> [ 4.404930] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 4.405355] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [ 4.405721] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 4.406070] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '002'
> [ 4.406479] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
> [ 4.407025] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
> [ 4.407621] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
> [ 4.408257] ehci_hcd 0000:00:1d.7: debug port 1
> [ 4.408575] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
> [ 4.413053] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
> [ 4.413452] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
> [ 4.413832] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0321000
> [ 4.414194] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
> [ 4.418647] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
> [ 4.424905] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 4.425304] usb usb2: default language 0x0409
> [ 4.425621] usb usb2: udev 1, busnum 2, minor = 128
> [ 4.425954] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 4.426353] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.426886] usb usb2: Product: EHCI Host Controller
> [ 4.427215] usb usb2: Manufacturer: Linux 3.1.0-ioless-full-next-20111025+ ehci_hcd
> [ 4.427761] usb usb2: SerialNumber: 0000:00:1d.7
> [ 4.428225] usb usb2: usb_probe_device
> [ 4.428513] usb usb2: configuration #1 chosen from 1 choice
> [ 4.428879] usb usb2: adding 2-0:1.0 (config #1, interface 0)
> [ 4.429317] hub 2-0:1.0: usb_probe_interface
> [ 4.429626] hub 2-0:1.0: usb_probe_interface - got id
> [ 4.429966] hub 2-0:1.0: USB hub found
> [ 4.430258] hub 2-0:1.0: 6 ports detected
> [ 4.430557] hub 2-0:1.0: standalone hub
> [ 4.430848] hub 2-0:1.0: no power switching (usb 1.0)
> [ 4.431185] hub 2-0:1.0: individual port over-current protection
> [ 4.431556] hub 2-0:1.0: power on to power good time: 20ms
> [ 4.431917] hub 2-0:1.0: local power source is good
> [ 4.432247] hub 2-0:1.0: trying to enable port power on non-switchable hub
> [ 4.432692] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001'
> [ 4.433264] uhci_hcd: USB Universal Host Controller Interface driver
> [ 4.433681] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 4.434104] uhci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 4.434470] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> [ 4.434821] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '003'
> [ 4.435236] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
> [ 4.435779] uhci_hcd 0000:00:1a.0: detected 2 ports
> [ 4.436114] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
> [ 4.436510] uhci_hcd 0000:00:1a.0: Performing full reset
> [ 4.436871] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
> [ 4.437237] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0
> [ 4.437646] usb usb3: default language 0x0409
> [ 4.437969] usb usb3: udev 1, busnum 3, minor = 256
> [ 4.438297] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 4.438696] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.439228] usb usb3: Product: UHCI Host Controller
> [ 4.439557] usb usb3: Manufacturer: Linux 3.1.0-ioless-full-next-20111025+ uhci_hcd
> [ 4.440107] usb usb3: SerialNumber: 0000:00:1a.0
> [ 4.440567] usb usb3: usb_probe_device
> [ 4.440861] usb usb3: configuration #1 chosen from 1 choice
> [ 4.441223] usb usb3: adding 3-0:1.0 (config #1, interface 0)
> [ 4.441657] hub 3-0:1.0: usb_probe_interface
> [ 4.441968] hub 3-0:1.0: usb_probe_interface - got id
> [ 4.442303] hub 3-0:1.0: USB hub found
> [ 4.442594] hub 3-0:1.0: 2 ports detected
> [ 4.442894] hub 3-0:1.0: standalone hub
> [ 4.443184] hub 3-0:1.0: no power switching (usb 1.0)
> [ 4.443519] hub 3-0:1.0: individual port over-current protection
> [ 4.443893] hub 3-0:1.0: power on to power good time: 2ms
> [ 4.444246] hub 3-0:1.0: local power source is good
> [ 4.444574] hub 3-0:1.0: trying to enable port power on non-switchable hub
> [ 4.445001] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001'
> [ 4.445461] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
> [ 4.445893] IOAPIC[0]: Set routing entry (8-21 -> 0x91 -> IRQ 21 Mode:1 Active:1 Dest:0)
> [ 4.446459] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> [ 4.446878] uhci_hcd 0000:00:1a.1: setting latency timer to 64
> [ 4.447243] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> [ 4.447589] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '004'
> [ 4.448003] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> [ 4.448546] uhci_hcd 0000:00:1a.1: detected 2 ports
> [ 4.448847] ata3: SATA link down (SStatus 0 SControl 300)
> [ 4.448884] ata4: SATA link down (SStatus 0 SControl 300)
> [ 4.448907] ata6: SATA link down (SStatus 0 SControl 300)
> [ 4.448930] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 4.448951] ata5: SATA link down (SStatus 0 SControl 300)
> [ 4.450645] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
> [ 4.451044] uhci_hcd 0000:00:1a.1: Performing full reset
> [ 4.451401] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
> [ 4.451781] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020c0
> [ 4.452180] usb usb4: default language 0x0409
> [ 4.452498] usb usb4: udev 1, busnum 4, minor = 384
> [ 4.452829] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 4.453228] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.453760] usb usb4: Product: UHCI Host Controller
> [ 4.454092] usb usb4: Manufacturer: Linux 3.1.0-ioless-full-next-20111025+ uhci_hcd
> [ 4.454639] usb usb4: SerialNumber: 0000:00:1a.1
> [ 4.455103] usb usb4: usb_probe_device
> [ 4.455392] usb usb4: configuration #1 chosen from 1 choice
> [ 4.455754] usb usb4: adding 4-0:1.0 (config #1, interface 0)
> [ 4.455818] ata7: SATA link down (SStatus 0 SControl 300)
> [ 4.456540] hub 4-0:1.0: usb_probe_interface
> [ 4.456852] hub 4-0:1.0: usb_probe_interface - got id
> [ 4.457187] hub 4-0:1.0: USB hub found
> [ 4.457478] hub 4-0:1.0: 2 ports detected
> [ 4.457774] hub 4-0:1.0: standalone hub
> [ 4.458066] hub 4-0:1.0: no power switching (usb 1.0)
> [ 4.458401] hub 4-0:1.0: individual port over-current protection
> [ 4.458771] hub 4-0:1.0: power on to power good time: 2ms
> [ 4.459126] hub 4-0:1.0: local power source is good
> [ 4.459454] hub 4-0:1.0: trying to enable port power on non-switchable hub
> [ 4.459885] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001'
> [ 4.460339] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
> [ 4.460762] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> [ 4.461182] uhci_hcd 0000:00:1a.2: setting latency timer to 64
> [ 4.461548] uhci_hcd 0000:00:1a.2: UHCI Host Controller
> [ 4.461897] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '005'
> [ 4.462307] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
> [ 4.462851] uhci_hcd 0000:00:1a.2: detected 2 ports
> [ 4.463182] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
> [ 4.463577] uhci_hcd 0000:00:1a.2: Performing full reset
> [ 4.463936] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
> [ 4.464318] uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0
> [ 4.464715] usb usb5: default language 0x0409
> [ 4.465037] usb usb5: udev 1, busnum 5, minor = 512
> [ 4.465366] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> [ 4.465769] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.466300] usb usb5: Product: UHCI Host Controller
> [ 4.466628] usb usb5: Manufacturer: Linux 3.1.0-ioless-full-next-20111025+ uhci_hcd
> [ 4.467176] usb usb5: SerialNumber: 0000:00:1a.2
> [ 4.467635] usb usb5: usb_probe_device
> [ 4.467931] usb usb5: configuration #1 chosen from 1 choice
> [ 4.468292] usb usb5: adding 5-0:1.0 (config #1, interface 0)
> [ 4.468730] hub 5-0:1.0: usb_probe_interface
> [ 4.469043] hub 5-0:1.0: usb_probe_interface - got id
> [ 4.469378] hub 5-0:1.0: USB hub found
> [ 4.469671] hub 5-0:1.0: 2 ports detected
> [ 4.469972] hub 5-0:1.0: standalone hub
> [ 4.470263] hub 5-0:1.0: no power switching (usb 1.0)
> [ 4.470600] hub 5-0:1.0: individual port over-current protection
> [ 4.470973] hub 5-0:1.0: power on to power good time: 2ms
> [ 4.471327] hub 5-0:1.0: local power source is good
> [ 4.471657] hub 5-0:1.0: trying to enable port power on non-switchable hub
> [ 4.472085] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001'
> [ 4.472540] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
> [ 4.472970] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 4.473387] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 4.473757] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 4.474103] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '006'
> [ 4.477473] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
> [ 4.478017] uhci_hcd 0000:00:1d.0: detected 2 ports
> [ 4.478348] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
> [ 4.478745] uhci_hcd 0000:00:1d.0: Performing full reset
> [ 4.479102] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
> [ 4.479467] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
> [ 4.479866] usb usb6: default language 0x0409
> [ 4.480184] usb usb6: udev 1, busnum 6, minor = 640
> [ 4.480512] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> [ 4.480916] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.481446] usb usb6: Product: UHCI Host Controller
> [ 4.481777] usb usb6: Manufacturer: Linux 3.1.0-ioless-full-next-20111025+ uhci_hcd
> [ 4.482323] usb usb6: SerialNumber: 0000:00:1d.0
> [ 4.482785] usb usb6: usb_probe_device
> [ 4.483074] usb usb6: configuration #1 chosen from 1 choice
> [ 4.483434] usb usb6: adding 6-0:1.0 (config #1, interface 0)
> [ 4.483875] hub 6-0:1.0: usb_probe_interface
> [ 4.484182] hub 6-0:1.0: usb_probe_interface - got id
> [ 4.484516] hub 6-0:1.0: USB hub found
> [ 4.484811] hub 6-0:1.0: 2 ports detected
> [ 4.485107] hub 6-0:1.0: standalone hub
> [ 4.485397] hub 6-0:1.0: no power switching (usb 1.0)
> [ 4.485734] hub 6-0:1.0: individual port over-current protection
> [ 4.486104] hub 6-0:1.0: power on to power good time: 2ms
> [ 4.486457] hub 6-0:1.0: local power source is good
> [ 4.486788] hub 6-0:1.0: trying to enable port power on non-switchable hub
> [ 4.487212] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001'
> [ 4.487678] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
> [ 4.488097] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 4.488513] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 4.488881] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 4.489227] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '007'
> [ 4.489652] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
> [ 4.490200] uhci_hcd 0000:00:1d.1: detected 2 ports
> [ 4.490401] ata1.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
> [ 4.490403] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 4.491282] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
> [ 4.491680] uhci_hcd 0000:00:1d.1: Performing full reset
> [ 4.492036] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
> [ 4.492401] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
> [ 4.492800] usb usb7: default language 0x0409
> [ 4.493117] usb usb7: udev 1, busnum 7, minor = 768
> [ 4.493445] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
> [ 4.493848] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.494378] usb usb7: Product: UHCI Host Controller
> [ 4.494709] usb usb7: Manufacturer: Linux 3.1.0-ioless-full-next-20111025+ uhci_hcd
> [ 4.495255] usb usb7: SerialNumber: 0000:00:1d.1
> [ 4.495733] usb usb7: usb_probe_device
> [ 4.496022] usb usb7: configuration #1 chosen from 1 choice
> [ 4.496384] usb usb7: adding 7-0:1.0 (config #1, interface 0)
> [ 4.496823] hub 7-0:1.0: usb_probe_interface
> [ 4.497131] hub 7-0:1.0: usb_probe_interface - got id
> [ 4.497466] hub 7-0:1.0: USB hub found
> [ 4.497762] hub 7-0:1.0: 2 ports detected
> [ 4.498060] hub 7-0:1.0: standalone hub
> [ 4.498351] hub 7-0:1.0: no power switching (usb 1.0)
> [ 4.498688] hub 7-0:1.0: individual port over-current protection
> [ 4.499059] hub 7-0:1.0: power on to power good time: 2ms
> [ 4.499414] hub 7-0:1.0: local power source is good
> [ 4.499746] hub 7-0:1.0: trying to enable port power on non-switchable hub
> [ 4.500172] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001'
> [ 4.500643] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
> [ 4.501062] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 4.501479] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 4.501848] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 4.502197] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '008'
> [ 4.502609] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
> [ 4.503179] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
> [ 4.503777] hub 1-0:1.0: port 1: status 0501 change 0001
> [ 4.504131] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 001403 0 ACK POWER sig=k CSC CONNECT
> [ 4.504725] hub 1-0:1.0: port 2: status 0501 change 0001
> [ 4.504738] uhci_hcd 0000:00:1d.2: detected 2 ports
> [ 4.504743] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
> [ 4.504745] uhci_hcd 0000:00:1d.2: Performing full reset
> [ 4.504758] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
> [ 4.504765] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
> [ 4.504818] usb usb8: default language 0x0409
> [ 4.504829] usb usb8: udev 1, busnum 8, minor = 896
> [ 4.504830] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
> [ 4.504832] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.504833] usb usb8: Product: UHCI Host Controller
> [ 4.504835] usb usb8: Manufacturer: Linux 3.1.0-ioless-full-next-20111025+ uhci_hcd
> [ 4.504836] usb usb8: SerialNumber: 0000:00:1d.2
> [ 4.505031] usb usb8: usb_probe_device
> [ 4.505035] usb usb8: configuration #1 chosen from 1 choice
> [ 4.505048] usb usb8: adding 8-0:1.0 (config #1, interface 0)
> [ 4.505139] hub 8-0:1.0: usb_probe_interface
> [ 4.505141] hub 8-0:1.0: usb_probe_interface - got id
> [ 4.505142] hub 8-0:1.0: USB hub found
> [ 4.505148] hub 8-0:1.0: 2 ports detected
> [ 4.505150] hub 8-0:1.0: standalone hub
> [ 4.505151] hub 8-0:1.0: no power switching (usb 1.0)
> [ 4.505152] hub 8-0:1.0: individual port over-current protection
> [ 4.505154] hub 8-0:1.0: power on to power good time: 2ms
> [ 4.505163] hub 8-0:1.0: local power source is good
> [ 4.505165] hub 8-0:1.0: trying to enable port power on non-switchable hub
> [ 4.505204] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001'
> [ 4.505295] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
> [ 4.505434] Initializing USB Mass Storage driver...
> [ 4.505532] usbcore: registered new interface driver usb-storage
> [ 4.505534] USB Mass Storage support registered.
> [ 4.505679] usbcore: registered new interface driver libusual
> [ 4.505762] usbcore: registered new interface driver ums-alauda
> [ 4.505847] usbcore: registered new interface driver ums-cypress
> [ 4.505918] usbcore: registered new interface driver ums-datafab
> [ 4.505991] usbcore: registered new interface driver ums-freecom
> [ 4.506076] usbcore: registered new interface driver ums-isd200
> [ 4.506165] usbcore: registered new interface driver ums-jumpshot
> [ 4.506243] usbcore: registered new interface driver ums-karma
> [ 4.506313] usbcore: registered new interface driver ums-onetouch
> [ 4.506391] usbcore: registered new interface driver ums-sddr09
> [ 4.506479] usbcore: registered new interface driver ums-sddr55
> [ 4.506565] usbcore: registered new interface driver ums-usbat
> [ 4.506723] usbcore: registered new interface driver usbserial
> [ 4.506811] USB Serial support registered for generic
> [ 4.506906] usbcore: registered new interface driver usbserial_generic
> [ 4.506907] usbserial: USB Serial Driver core
> [ 4.506972] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
> [ 4.507053] usbcore: registered new interface driver belkin
> [ 4.507054] belkin_sa: v1.3:USB Belkin Serial converter driver
> [ 4.507125] USB Serial support registered for MCT U232
> [ 4.507213] usbcore: registered new interface driver mct_u232
> [ 4.507215] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
> [ 4.507486] i8042: PNP: No PS/2 controller found. Probing ports directly.
> [ 4.510687] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 4.510703] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 4.511075] mousedev: PS/2 mouse device common for all mice
> [ 4.511779] rtc_cmos 00:02: RTC can wake from S4
> [ 4.511985] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> [ 4.512024] rtc0: alarms up to one month, y3k, 114 bytes nvram
> [ 4.512100] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
> [ 4.512310] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
> [ 4.512440] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 4.512445] iTCO_vendor_support: vendor-support=0
> [ 4.512447] SoftDog: cannot register miscdev on minor=130 (err=-16)
> [ 4.512455] md: linear personality registered for level -1
> [ 4.512457] md: raid0 personality registered for level 0
> [ 4.512459] md: raid1 personality registered for level 1
> [ 4.512460] md: raid10 personality registered for level 10
> [ 4.512461] md: raid6 personality registered for level 6
> [ 4.512463] md: raid5 personality registered for level 5
> [ 4.512464] md: raid4 personality registered for level 4
> [ 4.512465] md: multipath personality registered for level -4
> [ 4.512467] md: faulty personality registered for level -5
> [ 4.512878] device-mapper: uevent: version 1.0.3
> [ 4.513125] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@xxxxxxxxxx
> [ 4.513232] device-mapper: multipath: version 1.3.0 loaded
> [ 4.513242] device-mapper: multipath round-robin: version 1.0.0 loaded
> [ 4.513244] device-mapper: multipath queue-length: version 0.1.0 loaded
> [ 4.513246] device-mapper: multipath service-time: version 0.2.0 loaded
> [ 4.513416] device-mapper: dm-log-userspace: version 1.1.0 loaded
> [ 4.515015] cpuidle: using governor ladder
> [ 4.534821] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT
> [ 4.535434] hub 1-0:1.0: port 4: status 0501 change 0001
> [ 4.535848] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
> [ 4.537659] cpuidle: using governor menu
> [ 4.538165] usbcore: registered new interface driver usbhid
> [ 4.538520] usbhid: USB HID core driver
> [ 4.539231] dell_wmi: No known WMI GUID found
> [ 4.539603] acer_wmi: Acer Laptop ACPI-WMI Extras
> [ 4.539930] acer_wmi: No or unsupported WMI interface, unable to load
> [ 4.540796] IOAPIC[0]: Set routing entry (8-22 -> 0x99 -> IRQ 22 Mode:1 Active:1 Dest:0)
> [ 4.541364] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> [ 4.544529] uhci_hcd 0000:00:1a.0: port 1 portsc 008a,00
> [ 4.544545] uhci_hcd 0000:00:1a.0: port 2 portsc 008a,00
> [ 4.545661] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
> [ 4.546053] ALSA hda_intel.c:2733 chipset global capabilities = 0x4401
> [ 4.546454] ALSA hda_intel.c:1163 Clearing TCSEL
> [ 4.548602] ata1.00: configured for UDMA/133
> [ 4.549147] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> [ 4.550030] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
> [ 4.550660] sd 0:0:0:0: [sda] Write Protect is off
> [ 4.550986] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 4.551350] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 4.554626] ALSA hda_intel.c:1009 codec_mask = 0x4
> [ 4.555153] ALSA hda_intel.c:1472 codec #2 probed OK
> [ 4.559596] uhci_hcd 0000:00:1a.1: port 2 portsc 0082,00
> [ 4.560675] ALSA hda_codec.c:3994 hda_codec: model 'intel-x58' is selected for config 8086:22 (DX58SO)
> [ 4.561287] hda_codec: ALC889: SKU not ready 0x411111f0
> [ 4.561958] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input2
> [ 4.565579] ALSA hda_codec.c:2378 Cannot find slave Side Playback Volume, skipped
> [ 4.566120] ALSA hda_codec.c:2378 Cannot find slave Headphone Playback Volume, skipped
> [ 4.566754] ALSA hda_codec.c:2378 Cannot find slave Mono Playback Volume, skipped
> [ 4.567296] ALSA hda_codec.c:2378 Cannot find slave Line-Out Playback Volume, skipped
> [ 4.567930] ALSA hda_codec.c:2378 Cannot find slave PCM Playback Volume, skipped
> [ 4.568555] ALSA hda_codec.c:2378 Cannot find slave Side Playback Switch, skipped
> [ 4.569097] ALSA hda_codec.c:2378 Cannot find slave Mono Playback Switch, skipped
> [ 4.569720] ALSA hda_codec.c:2378 Cannot find slave Line-Out Playback Switch, skipped
> [ 4.570272] ALSA hda_codec.c:2378 Cannot find slave PCM Playback Switch, skipped
> [ 4.571475] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [ 4.571643] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
> [ 4.572045] ALSA device list:
> [ 4.572046] #0: HDA Intel at 0xf7f00000 irq 45
> [ 4.572049] oprofile: using NMI interrupt.
> [ 4.572084] netem: version 1.3
> [ 4.572086] Netfilter messages via NETLINK v0.30.
> [ 4.572117] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ 4.572898] ctnetlink v0.93: registering with nfnetlink.
> [ 4.572931] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
> [ 4.572932] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
> [ 4.573247] xt_time: kernel timezone is -0000
> [ 4.574610] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 4.574671] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
> [ 4.574689] arp_tables: (C) 2002 David S. Miller
> [ 4.574715] TCP bic registered
> [ 4.574716] TCP cubic registered
> [ 4.574717] TCP westwood registered
> [ 4.574718] TCP highspeed registered
> [ 4.574720] TCP hybla registered
> [ 4.574721] TCP htcp registered
> [ 4.574722] TCP vegas registered
> [ 4.574723] TCP veno registered
> [ 4.574724] TCP scalable registered
> [ 4.574725] TCP lp registered
> [ 4.574726] TCP yeah registered
> [ 4.574727] TCP illinois registered
> [ 4.574728] Initializing XFRM netlink socket
> [ 4.575294] NET: Registered protocol family 10
> [ 4.578279] IPv6 over IPv4 tunneling driver
> [ 4.579911] NET: Registered protocol family 17
> [ 4.579921] NET: Registered protocol family 15
> [ 4.580034] Bridge firewalling registered
> [ 4.580045] Ebtables v2.0 registered
> [ 4.580134] Registering the dns_resolver key type
> [ 4.580188]
> [ 4.580189] printing PIC contents
> [ 4.580194] ... PIC IMR: ffff
> [ 4.580198] ... PIC IRR: 0c21
> [ 4.580210] ... PIC ISR: 0000
> [ 4.580214] ... PIC ELCR: 0c20
> [ 4.580215] printing local APIC contents on CPU#0/0:
> [ 4.580216] ... APIC ID: 00000000 (0)
> [ 4.580217] ... APIC VERSION: 00060015
> [ 4.580218] ... APIC TASKPRI: 00000000 (00)
> [ 4.580219] ... APIC PROCPRI: 00000000
> [ 4.580220] ... APIC LDR: 01000000
> [ 4.580221] ... APIC DFR: ffffffff
> [ 4.580222] ... APIC SPIV: 000001ff
> [ 4.580222] ... APIC ISR field:
> [ 4.580223] 0000000000000000000000000000000000000000000000000000000000000000
> [ 4.580226] ... APIC TMR field:
> [ 4.580227] 0000000000000000000000000000000000000002000000000000000000000000
> [ 4.580230] ... APIC IRR field:
> [ 4.580231] 0000000000000000000000000000000000000000000000000000000000000000
> [ 4.580233] ... APIC ESR: 00000000
> [ 4.580234] ... APIC ICR: 000000ef
> [ 4.580235] ... APIC ICR2: 01000000
> [ 4.580236] ... APIC LVTT: 000000ef
> [ 4.580236] ... APIC LVTPC: 00000400
> [ 4.580237] ... APIC LVT0: 00010700
> [ 4.580238] ... APIC LVT1: 00000400
> [ 4.580239] ... APIC LVTERR: 000000fe
> [ 4.580240] ... APIC TMICT: 00002073
> [ 4.580241] ... APIC TMCCT: 00000516
> [ 4.580241] ... APIC TDCR: 00000003
> [ 4.580242]
> [ 4.580243] number of MP IRQ sources: 15.
> [ 4.580244] number of IO-APIC #8 registers: 24.
> [ 4.580245] testing the IO APIC.......................
> [ 4.580253]
> [ 4.580254] IO APIC #8......
> [ 4.580254] .... register #00: 08000000
> [ 4.580255] ....... : physical APIC id: 08
> [ 4.580256] ....... : Delivery Type: 0
> [ 4.580257] ....... : LTS : 0
> [ 4.580258] .... register #01: 00170020
> [ 4.580259] ....... : max redirection entries: 17
> [ 4.580260] ....... : PRQ implemented: 0
> [ 4.580261] ....... : IO APIC version: 20
> [ 4.580261] .... IRQ redirection table:
> [ 4.580262] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
> [ 4.580267] 00 00 1 0 0 0 0 0 0 00
> [ 4.580272] 01 00 0 0 0 0 0 0 0 31
> [ 4.580278] 02 00 0 0 0 0 0 0 0 30
> [ 4.580283] 03 00 0 0 0 0 0 0 0 33
> [ 4.580289] 04 00 0 0 0 0 0 0 0 34
> [ 4.580295] 05 00 0 0 0 0 0 0 0 35
> [ 4.580300] 06 00 1 0 0 0 0 0 0 36
> [ 4.580305] 07 00 0 0 0 0 0 0 0 37
> [ 4.580309] 08 00 0 0 0 0 0 0 0 38
> [ 4.580314] 09 00 0 1 0 0 0 0 0 39
> [ 4.580318] 0a 00 0 0 0 0 0 0 0 3A
> [ 4.580323] 0b 00 0 0 0 0 0 0 0 3B
> [ 4.580328] 0c 00 0 0 0 0 0 0 0 3C
> [ 4.580333] 0d 00 0 0 0 0 0 0 0 3D
> [ 4.580337] 0e 00 0 0 0 0 0 0 0 3E
> [ 4.580342] 0f 00 0 0 0 0 0 0 0 3F
> [ 4.580346] 10 00 0 1 0 1 0 0 0 29
> [ 4.580351] 11 00 1 1 0 1 0 0 0 41
> [ 4.580355] 12 00 0 1 0 1 0 0 0 81
> [ 4.580360] 13 00 0 1 0 1 0 0 0 61
> [ 4.580365] 14 00 1 1 0 1 0 0 0 71
> [ 4.580370] 15 00 0 1 0 1 0 0 0 91
> [ 4.580374] 16 00 1 1 0 1 0 0 0 99
> [ 4.580379] 17 00 0 1 0 1 0 0 0 89
> [ 4.580381] IRQ to pin mappings:
> [ 4.580382] IRQ0 -> 0:2
> [ 4.580383] IRQ1 -> 0:1
> [ 4.580384] IRQ3 -> 0:3
> [ 4.580385] IRQ4 -> 0:4
> [ 4.580386] IRQ5 -> 0:5
> [ 4.580388] IRQ6 -> 0:6
> [ 4.580389] IRQ7 -> 0:7
> [ 4.580390] IRQ8 -> 0:8
> [ 4.580391] IRQ9 -> 0:9
> [ 4.580392] IRQ10 -> 0:10
> [ 4.580393] IRQ11 -> 0:11
> [ 4.580394] IRQ12 -> 0:12
> [ 4.580395] IRQ13 -> 0:13
> [ 4.580401] IRQ14 -> 0:14
> [ 4.580402] IRQ15 -> 0:15
> [ 4.580403] IRQ16 -> 0:16
> [ 4.580436] IRQ17 -> 0:17
> [ 4.580438] IRQ18 -> 0:18
> [ 4.580440] IRQ19 -> 0:19
> [ 4.580442] IRQ20 -> 0:20
> [ 4.580444] IRQ21 -> 0:21
> [ 4.580446] IRQ22 -> 0:22
> [ 4.580448] IRQ23 -> 0:23
> [ 4.580450] .................................... done.
> [ 4.580860] PM: Hibernation image not present or could not be loaded.
> [ 4.580893] registered taskstats version 1
> [ 4.581642] Magic number: 15:11:135
> [ 4.581662] block ram0: hash matches
> [ 4.581752] netconsole: local port 6665
> [ 4.581753] netconsole: local IP 10.0.0.0
> [ 4.581754] netconsole: interface 'eth0'
> [ 4.581755] netconsole: remote port 6666
> [ 4.581756] netconsole: remote IP 192.168.1.1
> [ 4.581757] netconsole: remote ethernet address 00:30:48:fe:19:95
> [ 4.581759] netconsole: device eth0 not up yet, forcing it
> [ 4.616859] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [ 4.617212] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [ 4.617566] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [ 4.635341] hub 1-0:1.0: state 7 ports 6 chg 0016 evt 0000
> [ 4.635700] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
> [ 4.640298] sda: sda1 sda2 sda4 < sda5 sda6 sda7 sda8 sda9 >
> [ 4.642044] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 4.677358] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
> [ 4.686365] ehci_hcd 0000:00:1a.7: port 1 high speed
> [ 4.686699] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
> [ 4.728055] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
> [ 4.728745] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 4.737967] usb 1-1: new high-speed USB device number 2 using ehci_hcd
> [ 4.791041] ehci_hcd 0000:00:1a.7: port 1 high speed
> [ 4.791376] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
> [ 4.804786] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 4.861660] usb 1-1: default language 0x0409
> [ 4.868591] usb 1-1: udev 2, busnum 1, minor = 1
> [ 4.868910] usb 1-1: New USB device found, idVendor=0b95, idProduct=1780
> [ 4.869304] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 4.869727] usb 1-1: Product: AX88178
> [ 4.870015] usb 1-1: Manufacturer: ASIX Elec. Corp.
> [ 4.870342] usb 1-1: SerialNumber: 000013
> [ 4.870809] usb 1-1: usb_probe_device
> [ 4.871093] usb 1-1: configuration #1 chosen from 1 choice
> [ 4.872057] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
> [ 4.873049] asix 1-1:1.0: usb_probe_interface
> [ 4.873358] asix 1-1:1.0: usb_probe_interface - got id
> [ 4.879261] ata2.00: ATAPI: PLEXTOR DVDR PX-712A, 1.07, max UDMA/33
> [ 4.879674] ata2.00: applying bridge limits
> [ 4.910499] ata2.00: configured for UDMA/33
> [ 4.911951] scsi 1:0:0:0: CD-ROM PLEXTOR DVDR PX-712A 1.07 PQ: 0 ANSI: 5
> [ 5.216594] ata8: SATA link down (SStatus 0 SControl 300)
> [ 5.585475] asix 1-1:1.0: eth1: register 'asix' at usb-0000:00:1a.7-1, ASIX AX88178 USB 2.0 Ethernet, 00:23:54:5c:02:83
> [ 5.586147] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '002'
> [ 5.586628] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
> [ 5.587011] ehci_hcd 0000:00:1a.7: port 2 low speed --> companion
> [ 5.638221] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC
> [ 5.638842] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
> [ 5.685046] usb usb8: suspend_rh (auto-stop)
> [ 5.685052] usb usb5: suspend_rh (auto-stop)
> [ 5.685080] usb usb6: suspend_rh (auto-stop)
> [ 5.685101] usb usb7: suspend_rh (auto-stop)
> [ 5.685132] usb usb4: suspend_rh (auto-stop)
> [ 5.690253] ehci_hcd 0000:00:1a.7: port 4 high speed
> [ 5.690587] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT
> [ 5.741839] usb 1-4: new high-speed USB device number 4 using ehci_hcd
> [ 5.792936] ehci_hcd 0000:00:1a.7: port 4 high speed
> [ 5.793271] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT
> [ 6.792058] usb 1-4: default language 0x0409
> [ 6.793792] usb 1-4: udev 4, busnum 1, minor = 3
> [ 6.794118] usb 1-4: New USB device found, idVendor=1307, idProduct=0165
> [ 6.794512] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 6.794938] usb 1-4: Product: USB Mass Storage Device
> [ 6.795276] usb 1-4: Manufacturer: Teclast Technology
> [ 6.795620] usb 1-4: SerialNumber: 0000000000020D
> [ 6.796126] usb 1-4: usb_probe_device
> [ 6.796410] usb 1-4: configuration #1 chosen from 1 choice
> [ 6.796852] usb 1-4: adding 1-4:1.0 (config #1, interface 0)
> [ 6.797355] usb-storage 1-4:1.0: usb_probe_interface
> [ 6.797703] usb-storage 1-4:1.0: usb_probe_interface - got id
> [ 6.798340] scsi9 : usb-storage 1-4:1.0
> [ 6.799167] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '004'
> [ 6.799691] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
> [ 6.800046] uhci_hcd 0000:00:1a.0: port 2 portsc 01a3,00
> [ 6.800396] hub 3-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
> [ 6.904320] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
> [ 7.006011] usb 3-2: new low-speed USB device number 2 using uhci_hcd
> [ 7.179318] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
> [ 7.180134] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 7.183224] console [netcon0] enabled
> [ 7.183516] netconsole: network logging started
> [ 7.184110] rtc_cmos 00:02: setting system clock to 2011-10-31 15:08:14 UTC (1320073694)
> [ 7.199461] IP-Config: Complete:
> [ 7.199749] device=eth0, addr=192.168.1.52, mask=255.255.255.0, gw=192.168.1.1,
> [ 7.200345] host=fat, domain=, nis-domain=(none),
> [ 7.200744] bootserver=192.168.1.11, rootserver=192.168.1.11, rootpath=
> [ 7.201837] md: Waiting for all devices to be available before autodetect
> [ 7.202262] md: If you don't use raid, use raid=noautodetect
> [ 7.203175] md: Autodetecting RAID arrays.
> [ 7.203485] md: Scanned 0 and added 0 devices.
> [ 7.203801] md: autorun ...
> [ 7.204054] md: ... autorun DONE.
> [ 7.209071] usb 3-2: skipped 1 descriptor after interface
> [ 7.209478] usb 3-2: skipped 1 descriptor after interface
> [ 7.216044] usb 3-2: default language 0x0409
> [ 7.247944] usb 3-2: udev 2, busnum 3, minor = 257
> [ 7.248311] usb 3-2: New USB device found, idVendor=0557, idProduct=2220
> [ 7.248712] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 7.249208] usb 3-2: Product: ATEN CS-1758/54
> [ 7.249528] usb 3-2: Manufacturer: ATEN
> [ 7.249978] usb 3-2: usb_probe_device
> [ 7.250284] usb 3-2: configuration #1 chosen from 1 choice
> [ 7.252959] usb 3-2: adding 3-2:1.0 (config #1, interface 0)
> [ 7.291931] usbserial_generic 3-2:1.0: usb_probe_interface
> [ 7.292298] usbserial_generic 3-2:1.0: usb_probe_interface - got id
> [ 7.292720] usbhid 3-2:1.0: usb_probe_interface
> [ 7.293079] usbhid 3-2:1.0: usb_probe_interface - got id
> [ 7.327419] input: ATEN ATEN CS-1758/54 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input4
> [ 7.328153] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
> [ 7.329022] generic-usb 0003:0557:2220.0001: input: USB HID v1.10 Keyboard [ATEN ATEN CS-1758/54] on usb-0000:00:1a.0-2/input0
> [ 7.329795] usb 3-2: adding 3-2:1.1 (config #1, interface 1)
> [ 7.339840] usbserial_generic 3-2:1.1: usb_probe_interface
> [ 7.340300] usbserial_generic 3-2:1.1: usb_probe_interface - got id
> [ 7.340720] usbhid 3-2:1.1: usb_probe_interface
> [ 7.341108] usbhid 3-2:1.1: usb_probe_interface - got id
> [ 7.369221] input: ATEN ATEN CS-1758/54 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input5
> [ 7.370412] generic-usb 0003:0557:2220.0002: input: USB HID v1.10 Mouse [ATEN ATEN CS-1758/54] on usb-0000:00:1a.0-2/input1
> [ 7.371204] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '002'
> [ 7.371684] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [ 7.372085] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0004
> [ 7.796859] scsi 9:0:0:0: Direct-Access Teclast CoolFlash 0.00 PQ: 0 ANSI: 2
> [ 7.797630] scsi: killing requests for dead queue
> [ 7.798243] scsi: killing requests for dead queue
> [ 7.798849] scsi: killing requests for dead queue
> [ 7.799411] scsi: killing requests for dead queue
> [ 7.800004] scsi: killing requests for dead queue
> [ 7.800584] scsi: killing requests for dead queue
> [ 7.801143] scsi: killing requests for dead queue
> [ 7.802326] scsi_scan_9 used greatest stack depth: 4968 bytes left
> [ 7.803895] sd 9:0:0:0: [sdb] 63084544 512-byte logical blocks: (32.2 GB/30.0 GiB)
> [ 7.805116] sd 9:0:0:0: [sdb] Write Protect is off
> [ 7.805470] sd 9:0:0:0: [sdb] Mode Sense: 00 00 00 00
> [ 7.806538] sd 9:0:0:0: [sdb] Asking for cache data failed
> [ 7.806906] sd 9:0:0:0: [sdb] Assuming drive cache: write through
> [ 7.811861] sd 9:0:0:0: [sdb] Asking for cache data failed
> [ 7.812232] sd 9:0:0:0: [sdb] Assuming drive cache: write through
> [ 7.946224] sdb: sdb1 sdb2 sdb3
> [ 7.951138] sd 9:0:0:0: [sdb] Asking for cache data failed
> [ 7.951508] sd 9:0:0:0: [sdb] Assuming drive cache: write through
> [ 7.951899] sd 9:0:0:0: [sdb] Attached SCSI removable disk
> [ 8.210492] VFS: Mounted root (nfs filesystem) on device 0:16.
> [ 8.210919] debug: unmapping init memory ffffffff81f3a000..ffffffff821ee000
> [ 8.317368] stty used greatest stack depth: 4624 bytes left
> [ 8.334815] startpar used greatest stack depth: 3760 bytes left
> [ 8.359897] sed used greatest stack depth: 3680 bytes left
> [ 8.394067] S02hostname.sh used greatest stack depth: 3648 bytes left
> [ 8.415688] mountpoint used greatest stack depth: 3552 bytes left
> [ 8.703704] input_id used greatest stack depth: 3472 bytes left
> [ 10.769469] EXT4-fs (sda5): recovery complete
> [ 10.769862] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
> [ 11.210789] grep used greatest stack depth: 3376 bytes left
> [ 11.755641] ALSA hda_intel.c:1843 azx_pcm_prepare: bufsize=0x10000, format=0x11
> [ 11.756270] ALSA hda_codec.c:1413 hda_codec_setup_stream: NID=0x7, stream=0x4, channel=0, format=0x11
> [ 11.758253] ALSA hda_intel.c:1843 azx_pcm_prepare: bufsize=0x10000, format=0x11
> [ 11.758829] ALSA hda_codec.c:1413 hda_codec_setup_stream: NID=0x7, stream=0x4, channel=0, format=0x11
> [ 12.388890] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [ 12.390334] NFSD: starting 90-second grace period
> [ 12.736493] udevadm used greatest stack depth: 3312 bytes left
> [ 13.829866] mount.nfs used greatest stack depth: 2640 bytes left
> [ 18.018828] eth0: no IPv6 routers present
> [ 120.880818] XFS (sda7): Mounting Filesystem
> [ 120.951448] XFS (sda7): Ending clean mount
> [ 121.531949] XFS (sdb3): Mounting Filesystem
> [ 122.270060] XFS (sdb3): Ending clean mount

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Amit Shah: "Re: [PATCH] VirtioConsole support."
Previous message: Michael Neuling: "Re: powerpc 476, Little-endian, pte fault"
In reply to: Wu Fengguang: "linux-next 20111025: warnings inrcu_idle_exit_common()/rcu_idle_enter_common()"
Next in thread: Wu Fengguang: "Re: linux-next 20111025: warnings inrcu_idle_exit_common()/rcu_idle_enter_common()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]