Re: [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver

[Ryan Mallon]

On 08/11/11 21:49, Nikolaus Voss wrote:

> This driver has the following properties compared to the old driver:
> 1. Support for multiple interfaces.
> 2. Interrupt driven I/O as opposed to polling/busy waiting.
> 3. Support for _one_ repeated start (Sr) condition, which is enough
>    for most real-world applications including all SMBus transfer types.
>    (The hardware does not support issuing arbitrary Sr conditions on the
>     bus.)
> 
> Tested on Atmel G45 with BQ20Z80 battery SMBus client.
> 
> Signed-off-by: Nikolaus Voss <n.voss@xxxxxxxxxxx>

<snip>

> +	dev->clk = clk_get(&pdev->dev, "twi_clk");
> +	if (IS_ERR(dev->clk)) {
> +		dev_err(&pdev->dev, "no clock defined\n");
> +		rc = -ENODEV;
> +		goto err_free_mem;
> +	}
> +	clk_enable(dev->clk);


There are now dummy clk_prepare/unprepare functions in
include/linux/clk.h, so you should be using them in this driver to
future proof it.

~Ryan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/