Re: Kernel v3.0.8 igb driver dies when pulling network cable

[Stefan Priebe - Profihost AG]

> It would be useful if you could try the latest driver from e1000.sf.net
> just to verify  if this is a bug in the upstream kernel or if it is also
> present in our e1000.sf.net.driver.  This way we can figure out if this
> is an issue where a patch wasn't pushed into the stable kernel or if it
> is an issue that still exists in our latest release.
>
> Also could you provide us with the part number you are currently using.
> If you could provide us with the device ID for the part via lspci we can
> start narrowing down the root cause for the issue as currently we don't
> have any information about what hardware you are experiencing this issue on.

Ok another note i missed last time. Ethernet and Server stays fully 
functional - it just prints the message and resets the adapter.

OK let's start with lspci:
a:00.0 Ethernet controller: Intel Corporation Device 10c9 (rev 01)
        Subsystem: Super Micro Computer Inc Device 10c9
        Flags: bus master, fast devsel, latency 0, IRQ 28
        Memory at fbe60000 (32-bit, non-prefetchable) [size=128K]
        Memory at fbe40000 (32-bit, non-prefetchable) [size=128K]
        I/O ports at e880 [size=32]
        Memory at fbe1c000 (32-bit, non-prefetchable) [size=16K]
        Expansion ROM at fbe20000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 3
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ 
Queue=0/0 Enable-
        Capabilities: [70] MSI-X: Enable+ Mask- TabSize=10
        Capabilities: [a0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting <?>
        Capabilities: [140] Device Serial Number ce-5a-2b-ff-ff-90-25-00
        Capabilities: [150] #0e
        Capabilities: [160] #10
        Kernel driver in use: igb

0a:00.1 Ethernet controller: Intel Corporation Device 10c9 (rev 01)
        Subsystem: Super Micro Computer Inc Device 10c9
        Flags: bus master, fast devsel, latency 0, IRQ 40
        Memory at fbee0000 (32-bit, non-prefetchable) [size=128K]
        Memory at fbec0000 (32-bit, non-prefetchable) [size=128K]
        I/O ports at ec00 [size=32]
        Memory at fbe9c000 (32-bit, non-prefetchable) [size=16K]
        Expansion ROM at fbea0000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 3
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ 
Queue=0/0 Enable-
        Capabilities: [70] MSI-X: Enable+ Mask- TabSize=10
        Capabilities: [a0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting <?>
        Capabilities: [140] Device Serial Number ce-5a-2b-ff-ff-90-25-00
        Capabilities: [150] #0e
        Capabilities: [160] #10
        Kernel driver in use: igb

Using the latest stable igb driver from e1000.sf.net works fine without 
any message.

Thanks,

Stefan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/