Re: softirq oops from b44_poll

From: Xander Hover
Date: Tue Nov 22 2011 - 08:43:33 EST


Tested on 3.1.1 and 3.2_rc2+ now.
Fix is working as expected.

Kind regards,

Xander Hover


On Tue, Nov 22, 2011 at 12:17 AM, Peter P Waskiewicz Jr
<peter.p.waskiewicz.jr@xxxxxxxxx> wrote:
> On Mon, 2011-11-21 at 05:58 -0800, Xander Hover wrote:
>> Hi all,
>>
>> I noticed the small discussion about the b44_poll OOPS and
>> I also have a uni-processor PC with a broadcom network device (b44)
>> that causes similar kernel OOPSes.
>>
>> Here is a (reproducible) trace that still shows up in kernel 3.1.1:
>>
>>  ------------[ cut here ]------------
>>     WARNING: at kernel/softirq.c:159 local_bh_enable+0x32/0x79()
>>     Hardware name: Dimension 2400
>>     Modules linked in: snd_seq_midi snd_emu10k1_synth snd_emux_synth
>> snd_seq_virmidi snd_seq_midi_emul snd_seq_oss snd_seq_midi_event
>> snd_seq snd_pcm_oss snd_mixer_oss bnep rfcomm cryptd aes_i586
>> aes_generic ecb btusb bluetooth rfkill ppdev snd_emu10k1 snd_rawmidi
>> snd_ac97_codec ac97_bus snd_pcm snd_seq_device snd_timer
>> snd_page_alloc dcdbas snd_util_mem parport_pc snd_hwdep snd parport
>> emu10k1_gp rtc_cmos gameport i2c_i801
>>     Pid: 0, comm: swapper Not tainted 3.1.1-gentoo #1
>>     Call Trace:
>>      [<c1022970>] warn_slowpath_common+0x65/0x7a
>>      [<c102699e>] ? local_bh_enable+0x32/0x79
>>      [<c1022994>] warn_slowpath_null+0xf/0x13
>>      [<c102699e>] local_bh_enable+0x32/0x79
>>      [<c134bfd8>] destroy_conntrack+0x7c/0x9b
>>      [<c134890b>] nf_conntrack_destroy+0x1f/0x26
>>      [<c132e3a6>] skb_release_head_state+0x74/0x83
>>      [<c132e286>] __kfree_skb+0xb/0x6b
>>      [<c132e30a>] consume_skb+0x24/0x26
>>      [<c127c925>] b44_poll+0xaa/0x449
>>      [<c1333ca1>] net_rx_action+0x3f/0xea
>>      [<c1026a44>] __do_softirq+0x5f/0xd5
>>      [<c10269e5>] ? local_bh_enable+0x79/0x79
>>      <IRQ>  [<c1026c32>] ? irq_exit+0x34/0x8d
>>      [<c1003628>] ? do_IRQ+0x74/0x87
>>      [<c13f5329>] ? common_interrupt+0x29/0x30
>>      [<c1006e18>] ? default_idle+0x29/0x3e
>>      [<c10015a7>] ? cpu_idle+0x2f/0x5d
>>      [<c13e91c5>] ? rest_init+0x79/0x7b
>>      [<c15c66a9>] ? start_kernel+0x297/0x29c
>>      [<c15c60b0>] ? i386_start_kernel+0xb0/0xb7
>>     ---[ end trace 583f33bb1aa207a9 ]---
>>
>>
>> However if I apply the following patch this error does not show up anymore:
>>
>>
>> diff --git a/drivers/net/ethernet/broadcom/b44.c
>> b/drivers/net/ethernet/broadcom/b44.c
>> index 4cf835d..3fb66d0 100644
>> --- a/drivers/net/ethernet/broadcom/b44.c
>> +++ b/drivers/net/ethernet/broadcom/b44.c
>> @@ -608,7 +608,7 @@ static void b44_tx(struct b44 *bp)
>>                                  skb->len,
>>                                  DMA_TO_DEVICE);
>>                 rp->skb = NULL;
>> -               dev_kfree_skb(skb);
>> +               dev_kfree_skb_irq(skb);
>
> I suspect the "right" way to fix this is to call dev_kfree_skb_any(skb);
> instead, since that will handle the in-interrupt case if that's where
> we're stuck.
>
> Can you try this patch (compile-tested only) and see if fixes the issue
> you're seeing:
>
> commit e36ef2c1a2b6b517ed43254eb89768794a049b1c
> Author: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@xxxxxxxxx>
> Date:   Mon Nov 21 15:14:18 2011 -0800
>
> b44: Use dev_kfree_skb_any() in b44_tx()
>
> Reported issues when using dev_kfree_skb() on UP systems and
> systems with low numbers of cores.  dev_kfree_skb_any() will
> properly save IRQ state before freeing the skb, depending on
> how b44_tx() is invoked.
>
> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@xxxxxxxxx>
> ---
>
>  drivers/net/ethernet/broadcom/b44.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
>
>
> diff --git a/drivers/net/ethernet/broadcom/b44.c
> b/drivers/net/ethernet/broadcom/b44.c
> index 4cf835d..6a7c39b 100644
> --- a/drivers/net/ethernet/broadcom/b44.c
> +++ b/drivers/net/ethernet/broadcom/b44.c
> @@ -608,7 +608,7 @@ static void b44_tx(struct b44 *bp)
>                                 skb->len,
>                                 DMA_TO_DEVICE);
>                rp->skb = NULL;
> -               dev_kfree_skb(skb);
> +               dev_kfree_skb_any(skb);
>        }
>
>        bp->tx_cons = cons;
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/