Re: [PATCH v4] input: add driver support for Sharp gp2ap002a00f proximitysensor

[Shubhrajyoti]

Hi  Oskar,



On Wednesday 23 November 2011 01:54 PM, oskar.andero@xxxxxxxxxxxxxxxx
wrote:
> From: Courtney Cavin <courtney.cavin@xxxxxxxxxxxxxxxx>
You may want to add some more description.

> Signed-off-by: Courtney Cavin <courtney.cavin@xxxxxxxxxxxxxxxx>
> Signed-off-by: Oskar Andero <oskar.andero@xxxxxxxxxxxxxxxx>
> ---
>  drivers/input/misc/Kconfig         |   10 ++
>  drivers/input/misc/Makefile        |    1 +
>  drivers/input/misc/gp2ap002a00f.c  |  295 ++++++++++++++++++++++++++++++++++++
>  include/linux/input/gp2ap002a00f.h |   22 +++
>  4 files changed, 328 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/input/misc/gp2ap002a00f.c
>  create mode 100644 include/linux/input/gp2ap002a00f.h
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index c9104bb..3c15c52 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -527,4 +527,14 @@ config INPUT_XEN_KBDDEV_FRONTEND
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called xen-kbdfront.
>  
> +config INPUT_GP2A
> +	tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
> +	depends on I2C
> +	help
> +	  Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
> +	  hooked to an I2C bus.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called gp2ap002a00f.
> +
>  endif
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 299ad5e..361cf49 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_INPUT_CMA3000)		+= cma3000_d0x.o
>  obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
>  obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
>  obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
> +obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
>  obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
>  obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
>  obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
> diff --git a/drivers/input/misc/gp2ap002a00f.c b/drivers/input/misc/gp2ap002a00f.c
> new file mode 100644
> index 0000000..5be5f05
> --- /dev/null
> +++ b/drivers/input/misc/gp2ap002a00f.c
> @@ -0,0 +1,295 @@
> +/*
> + * Copyright (C) 2011 Sony Ericsson Mobile Communications Inc.
> + *
> + * Author: Courtney Cavin <courtney.cavin@xxxxxxxxxxxxxxxx>
> + * Prepared for up-stream by: Oskar Andero <oskar.andero@xxxxxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2, as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/irq.h>
> +#include <linux/slab.h>
> +#include <linux/input.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +#include <linux/delay.h>
> +#include <linux/input/gp2ap002a00f.h>
> +
> +struct gp2a_data {
> +	struct input_dev *device;
> +	const struct gp2a_platform_data *pdata;
> +	struct i2c_client *i2c_client;
> +};
> +
> +enum gp2a_addr {
> +	GP2A_ADDR_PROX	= 0x0,
> +	GP2A_ADDR_GAIN	= 0x1,
> +	GP2A_ADDR_HYS	= 0x2,
> +	GP2A_ADDR_CYCLE	= 0x3,
> +	GP2A_ADDR_OPMOD	= 0x4,
> +	GP2A_ADDR_CON	= 0x6
> +};
> +
> +enum gp2a_controls {
> +	/* Software Shutdown control: 0 = shutdown, 1 = normal operation */
> +	GP2A_CTRL_SSD	= 0x01
> +};
> +
> +static int gp2a_enable(struct gp2a_data *dt)
> +{
> +	return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
> +					 GP2A_CTRL_SSD);
> +}
> +
> +static int gp2a_disable(struct gp2a_data *dt)
> +{
> +	return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
> +					 0x00);
> +}
> +
> +static int __devinit gp2a_initialize(struct gp2a_data *dt)
> +{
> +	int error;
> +
> +	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_GAIN,
> +					  0x08);
> +	if (error < 0)
> +		return error;
> +
> +	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_HYS,
> +					  0xc2);
> +	if (error < 0)
> +		return error;
> +
> +	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_CYCLE,
> +					  0x04);
> +	if (error < 0)
> +		return error;
> +
> +	error = gp2a_disable(dt);
> +
> +	return error;
> +}
> +
> +static int gp2a_report(struct gp2a_data *dt)
> +{
> +	int vo = gpio_get_value(dt->pdata->vout_gpio);
> +
> +	input_report_switch(dt->device, SW_FRONT_PROXIMITY, !vo);
> +	input_sync(dt->device);
> +
> +	return 0;
> +}
> +
> +static irqreturn_t gp2a_irq(int irq, void *handle)
> +{
> +	struct gp2a_data *dt = handle;
> +
> +	gp2a_report(dt);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int gp2a_device_open(struct input_dev *dev)
> +{
> +	struct gp2a_data *dt = input_get_drvdata(dev);
> +	int error;
> +
> +	error = gp2a_enable(dt);
> +	if (error < 0) {
> +		dev_err(&dev->dev, "unable to activate, err %d\n", error);
> +		return error;
> +	}
> +
> +	gp2a_report(dt);
> +
> +	return 0;
> +}
> +
> +static void gp2a_device_close(struct input_dev *dev)
> +{
> +	struct gp2a_data *dt = input_get_drvdata(dev);
> +	int error;
> +
> +	error = gp2a_disable(dt);
> +	if (error < 0)
> +		dev_err(&dev->dev, "unable to deactivate, err %d\n", error);
> +}
> +
> +static int __devinit gp2a_probe(struct i2c_client *client,
> +				const struct i2c_device_id *id)
> +{
> +	const struct gp2a_platform_data *pdata;
> +	struct gp2a_data *dt;
> +	int error;
> +
> +	pdata = client->dev.platform_data;
> +	if (!pdata)
> +		return -EINVAL;
> +
> +	if (pdata->hw_setup) {
> +		error = pdata->hw_setup(client);
> +		if (error < 0)
> +			return error;
> +	}
> +
> +	error = gpio_direction_input(pdata->vout_gpio);
> +	if (error < 0)
> +		goto err_hw_shutdown;
> +
> +	dt = kzalloc(sizeof(struct gp2a_data), GFP_KERNEL);
> +	if (!dt) {
> +		error = -ENOMEM;
> +		goto err_hw_shutdown;
> +	}
> +
> +	dt->pdata = pdata;
> +	dt->i2c_client = client;
> +	i2c_set_clientdata(client, dt);
> +
> +	error = gp2a_initialize(dt);
> +	if (error < 0)
> +		goto err_free_mem;
> +
> +	dt->device = input_allocate_device();
> +	if (!dt->device) {
> +		error = -ENOMEM;
> +		goto err_free_mem;
> +	}
> +	input_set_drvdata(dt->device, dt);
> +
> +	dt->device->open = gp2a_device_open;
> +	dt->device->close = gp2a_device_close;
> +	dt->device->name = GP2A_I2C_NAME;
> +	dt->device->id.bustype = BUS_I2C;
> +
> +	input_set_capability(dt->device, EV_SW, SW_FRONT_PROXIMITY);
> +
> +	error = request_threaded_irq(client->irq, NULL,
> +			gp2a_irq, IRQF_TRIGGER_RISING |
> +			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +			GP2A_I2C_NAME, dt);
> +	if (error) {
> +		dev_err(&dt->device->dev, "irq request failed\n");
> +		goto err_free_input_dev;
> +	}
> +
> +	error = input_register_device(dt->device);
> +	if (error) {
> +		dev_err(&dt->device->dev, "device registration failed\n");
> +		goto err_free_irq;
> +	}
> +
> +	device_init_wakeup(&client->dev, pdata->wakeup);
> +
> +	return 0;
> +
> +err_free_irq:
> +	free_irq(client->irq, dt);
> +err_free_input_dev:
> +	input_free_device(dt->device);
> +err_free_mem:
> +	kfree(dt);
> +err_hw_shutdown:
> +	if (pdata->hw_shutdown)
> +		pdata->hw_shutdown(client);
> +	return error;
> +}
> +
> +static int __devexit gp2a_remove(struct i2c_client *client)
> +{
> +	struct gp2a_data *dt = i2c_get_clientdata(client);
> +
> +	device_init_wakeup(&client->dev, false);
> +
> +	free_irq(client->irq, dt);
> +	input_unregister_device(dt->device);
> +	if (dt->pdata->hw_shutdown)
> +		dt->pdata->hw_shutdown(client);
> +	kfree(dt);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int gp2a_suspend(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct gp2a_data *dt = i2c_get_clientdata(client);
> +	int error;
> +
> +	mutex_lock(&dt->device->mutex);
> +
> +	if (device_may_wakeup(&client->dev)) {
> +		enable_irq_wake(client->irq);
> +	} else if (dt->device->users) {
> +		error = gp2a_disable(dt);
> +		if (error < 0)
> +			return error;
> +	}
> +
> +	mutex_unlock(&dt->device->mutex);
> +
> +	return 0;
> +}
> +
> +static int gp2a_resume(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct gp2a_data *dt = i2c_get_clientdata(client);
> +	int error;
> +
> +	mutex_lock(&dt->device->mutex);
> +
> +	if (device_may_wakeup(&client->dev)) {
> +		disable_irq_wake(client->irq);
> +	} else if (dt->device->users) {
> +		error = gp2a_enable(dt);
> +		if (error < 0)
> +			return error;
> +	}
> +
> +	mutex_unlock(&dt->device->mutex);
> +
> +	return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(gp2a_pm, gp2a_suspend, gp2a_resume);
> +
> +static const struct i2c_device_id gp2a_i2c_id[] = {
> +	{ GP2A_I2C_NAME, 0 },
> +	{ }
> +};
> +
> +static struct i2c_driver gp2a_i2c_driver = {
> +	.driver = {
> +		.name	= GP2A_I2C_NAME,
> +		.owner	= THIS_MODULE,
> +		.pm	= &gp2a_pm

This might give a compilation break 
fixing which feel free to add a
Reviewed-by: Datta Shubhrajyoti <shubhrajyoti@xxxxxx>
> +	},
> +	.probe		= gp2a_probe,
> +	.remove		= __devexit_p(gp2a_remove),
> +	.id_table	= gp2a_i2c_id
> +};
> +
> +static int __init gp2a_init(void)
> +{
> +	return i2c_add_driver(&gp2a_i2c_driver);
> +}
> +
> +static void __exit gp2a_exit(void)
> +{
> +	i2c_del_driver(&gp2a_i2c_driver);
> +}
> +
> +module_init(gp2a_init);
> +module_exit(gp2a_exit);
> +
> +MODULE_AUTHOR("Courtney Cavin <courtney.cavin@xxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Sharp GP2AP002A00F I2C Proximity/Opto sensor driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/input/gp2ap002a00f.h b/include/linux/input/gp2ap002a00f.h
> new file mode 100644
> index 0000000..aad2fd4
> --- /dev/null
> +++ b/include/linux/input/gp2ap002a00f.h
> @@ -0,0 +1,22 @@
> +#ifndef _GP2AP002A00F_H_
> +#define _GP2AP002A00F_H_
> +
> +#include <linux/i2c.h>
> +
> +#define GP2A_I2C_NAME "gp2ap002a00f"
> +
> +/**
> + * struct gp2a_platform_data - Sharp gp2ap002a00f proximity platform data
> + * @vout_gpio: The gpio connected to the object detected pin (VOUT)
> + * @wakeup: Set to true if the proximity can wake the device from suspend
> + * @hw_setup: Callback for setting up hardware such as gpios and vregs
> + * @hw_shutdown: Callback for properly shutting down hardware
> + */
> +struct gp2a_platform_data {
> +	int vout_gpio;
> +	bool wakeup;
> +	int (*hw_setup)(struct i2c_client *client);
> +	int (*hw_shutdown)(struct i2c_client *client);
> +};
> +
> +#endif

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/