Re: [PATCH 5/5] microblaze: Introduce IRQ_SW_OFFSET to help withsw IRQ

[Rob Herring]

On 12/09/2011 05:45 AM, Michal Simek wrote:
> If you setup IRQ_OFFSET > nr_irq you completely separate hardware
> and software IRQs which help you with debugging.
> 
> For example:
> IRQ_SW_OFFSET = 32
> 
>         DTS   HW(line)   LINUX
> timer - 2     3          35
> sysace  4     5          37
> serial  5     6          38
> 
> HW line is setup DTS + NO_IRQ_OFFSET to ensure that NO_IRQ is always 0.
> 

This is really confusing. DTS is the HW numbering. The last 2 columns
are both Linux IRQ numbering. Just create a single define for an offset.
Then I would combine this into the previous patch.

Rob

> ~ # cat /proc/interrupts
>            CPU0
>  35:       3570  Xilinx INTC-level     timer
>  37:          0  Xilinx INTC-level     systemace
>  38:        108  Xilinx INTC-level     serial
> 
> Signed-off-by: Michal Simek <monstr@xxxxxxxxx>
> ---
>  arch/microblaze/include/asm/irq.h |   12 +++++++++++-
>  arch/microblaze/kernel/intc.c     |   11 ++++-------
>  arch/microblaze/kernel/irq.c      |    9 ++++-----
>  3 files changed, 19 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
> index b07c179..97e98f1 100644
> --- a/arch/microblaze/include/asm/irq.h
> +++ b/arch/microblaze/include/asm/irq.h
> @@ -9,7 +9,17 @@
>  #ifndef _ASM_MICROBLAZE_IRQ_H
>  #define _ASM_MICROBLAZE_IRQ_H
>  
> -#define NR_IRQS (32 + 1)	/* Add 1 to skip over IRQ0 */
> +
> +/*
> + * Linux IRQ# is currently offset by one to map to the hardware
> + * irq number. So hardware IRQ0 maps to Linux irq 1.
> + */
> +#define NO_IRQ_OFFSET	1
> +
> +/* Use greater value to separate software and hw IRQs */
> +#define IRQ_SW_OFFSET	0
> +#define IRQ_OFFSET	(NO_IRQ_OFFSET + IRQ_SW_OFFSET)
> +#define NR_IRQS		(32 + IRQ_OFFSET)
>  #include <asm-generic/irq.h>
>  
>  /* This type is the placeholder for a hardware interrupt number. It has to
> diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
> index c66fce9c..44b177e 100644
> --- a/arch/microblaze/kernel/intc.c
> +++ b/arch/microblaze/kernel/intc.c
> @@ -92,11 +92,8 @@ unsigned int get_irq(struct pt_regs *regs)
>  	 * NOTE: This function is the one that needs to be improved in
>  	 * order to handle multiple interrupt controllers. It currently
>  	 * is hardcoded to check for interrupts only on the first INTC.
> -	 *
> -	 * Linux IRQ# is currently offset by one to map to the hardware
> -	 * irq number.  So hardware IRQ0 maps to Linux irq 1.
>  	 */
> -	irq = in_be32(INTC_BASE + IVR) + 1;
> +	irq = in_be32(INTC_BASE + IVR) + NO_IRQ_OFFSET;
>  	pr_debug("get_irq: %d\n", irq);
>  
>  	return irq;
> @@ -149,8 +146,8 @@ void __init init_IRQ(void)
>  	/* Turn on the Master Enable. */
>  	out_be32(intc_baseaddr + MER, MER_HIE | MER_ME);
>  
> -	for (i = 1; i <= nr_irq; ++i) {
> -		if (intr_mask & (0x00000001 << (i - 1))) {
> +	for (i = IRQ_OFFSET; i < (nr_irq + IRQ_OFFSET); ++i) {
> +		if (intr_mask & (0x00000001 << (i - IRQ_OFFSET))) {
>  			irq_set_chip_and_handler_name(i, &intc_dev,
>  				handle_edge_irq, "edge");
>  			irq_clear_status_flags(i, IRQ_LEVEL);
> @@ -159,6 +156,6 @@ void __init init_IRQ(void)
>  				handle_level_irq, "level");
>  			irq_set_status_flags(i, IRQ_LEVEL);
>  		}
> -		irq_get_irq_data(i)->hwirq = i - 1;
> +		irq_get_irq_data(i)->hwirq = i - IRQ_OFFSET;
>  	}
>  }
> diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
> index ac1b463..bbebcae 100644
> --- a/arch/microblaze/kernel/irq.c
> +++ b/arch/microblaze/kernel/irq.c
> @@ -34,7 +34,8 @@ void __irq_entry do_IRQ(struct pt_regs *regs)
>  	irq = get_irq(regs);
>  next_irq:
>  	BUG_ON(!irq);
> -	generic_handle_irq(irq);
> +	/* Substract 1 because of get_irq */
> +	generic_handle_irq(irq + IRQ_OFFSET - NO_IRQ_OFFSET);
>  
>  	irq = get_irq(regs);
>  	if (irq) {
> @@ -52,15 +53,13 @@ next_irq:
>    intc without any cascades or any connection that's why mapping is 1:1 */
>  unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq)
>  {
> -	return hwirq + 1;
> +	return hwirq + IRQ_OFFSET;
>  }
>  EXPORT_SYMBOL_GPL(irq_create_mapping);
>  
>  unsigned int irq_create_of_mapping(struct device_node *controller,
>  				   const u32 *intspec, unsigned int intsize)
>  {
> -	/* Hardware irq is mapped to Linux IRQ# by a 1 offset. Linux irq
> -	 * 0 means no IRQ. */
> -	return intspec[0] + 1;
> +	return intspec[0] + IRQ_OFFSET;
>  }
>  EXPORT_SYMBOL_GPL(irq_create_of_mapping);

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/