Re: [PATCH v2 1/7 v2] ARM: OMAP1: ams-delta: register latchdependent devices later

[Tony Lindgren]

* Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx> [111221 11:20]:
> On Wednesday 21 of December 2011 at 20:08:15, Tony Lindgren wrote:
> > * Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx> [111220 13:23]:
> > > In preparation to converting Amstrad Delta on-board latches to
> > > basic_mmio_gpio devices, registration of platform devices which depend
> > > on latches and will require initialization of their GPIO pins first,
> > > should be moved out of .machine_init down to late_initcall level, as the
> > > gpio-generic driver is not available until device_initcall time.  The
> > > latch reset operation, which will be replaced with GPIO initialization,
> > > must also be moved to late_initcall for the same reason.
> > > 
> > > Since there was already another, separate arch_initcall function for
> > > setting up one of those latch dependent devices, the on-board modem
> > > device, reuse that function, i.e., rename it to a name that matches the
> > > new purpose, extend with other device setup relocated from
> > > .machine_init, and move down to the late_initcall level.
> > > 
> > > While being at it, add missing gpio_free() in case the modem platform
> > > device registration fails.
> > > 
> > > Thanks to Tony Lindgren <tony@xxxxxxxxxxx> who suggested this approach
> > > instead of shifting up the gpio-generic driver initialization.
> > > 
> > > In addition, defer registration of the Amstrad Delta ASoC and serio
> > > devices, done from their device driver files, until late_initcall time,
> > > as those drivers will depend on their GPIO pins already requested from
> > > the board late_init() function until updated to register their GPIO pins
> > > themselves.
> > > 
> > > Created and tested against linux-3.2-rc6.
> > > 
> > > Signed-off-by: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
> > 
> > Planning to apply this series. Dmitry, care to ack the drivers/input/serio/
> > related change?
> 
> Don't we need Jarkko's or Mark's or Liam's ack as well for the change to 
> the sound/soc/omap/ams-delta.c file?

Yes, you're right.

Tony

> > > Changes since the initial version of this patch:
> > > * use late_initcall() unconditionally in modules, requested by Russell
> > >   King (thanks!); an updated patch 7/7 will follow,
> > > * in the changelog message, move credits to Tony up a bit, since the
> > >   person responsible for other changes (he might not necessarily like)
> > >   is me, not him ;).
> > > 
> > > Comments copied from this patch initial submission:
> > > This patch was not present in the initial submission, it replaces the
> > > old patch 1/10, providing an alternative solution not touching the
> > > gpio-generic driver.
> > > 
> > >  arch/arm/mach-omap1/board-ams-delta.c |   28 ++++++++++++++++++++--------
> > >  drivers/input/serio/ams_delta_serio.c |    2 +-
> > >  sound/soc/omap/ams-delta.c            |    2 +-
> > >  3 files changed, 22 insertions(+), 10 deletions(-)
> > > 
> > > diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
> > > index b0f15d2..50987c9 100644
> > > --- a/arch/arm/mach-omap1/board-ams-delta.c
> > > +++ b/arch/arm/mach-omap1/board-ams-delta.c
> > > @@ -275,11 +275,14 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
> > >  };
> > >  
> > >  static struct platform_device *ams_delta_devices[] __initdata = {
> > > -	&ams_delta_nand_device,
> > >  	&ams_delta_kp_device,
> > > +	&ams_delta_camera_device,
> > > +};
> > > +
> > > +static struct platform_device *late_devices[] __initdata = {
> > > +	&ams_delta_nand_device,
> > >  	&ams_delta_lcd_device,
> > >  	&ams_delta_led_device,
> > > -	&ams_delta_camera_device,
> > >  };
> > >  
> > >  static void __init ams_delta_init(void)
> > > @@ -307,9 +310,6 @@ static void __init ams_delta_init(void)
> > >  	omap_serial_init();
> > >  	omap_register_i2c_bus(1, 100, NULL, 0);
> > >  
> > > -	/* Clear latch2 (NAND, LCD, modem enable) */
> > > -	ams_delta_latch2_write(~0, 0);
> > > -
> > >  	omap1_usb_init(&ams_delta_usb_config);
> > >  	omap1_set_camera_info(&ams_delta_camera_platform_data);
> > >  #ifdef CONFIG_LEDS_TRIGGERS
> > > @@ -345,13 +345,18 @@ static struct platform_device ams_delta_modem_device = {
> > >  	},
> > >  };
> > >  
> > > -static int __init ams_delta_modem_init(void)
> > > +static int __init late_init(void)
> > >  {
> > >  	int err;
> > >  
> > >  	if (!machine_is_ams_delta())
> > >  		return -ENODEV;
> > >  
> > > +	/* Clear latch2 (NAND, LCD, modem enable) */
> > > +	ams_delta_latch2_write(~0, 0);
> > > +
> > > +	platform_add_devices(late_devices, ARRAY_SIZE(late_devices));
> > > +
> > >  	omap_cfg_reg(M14_1510_GPIO2);
> > >  	ams_delta_modem_ports[0].irq =
> > >  			gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
> > > @@ -367,9 +372,16 @@ static int __init ams_delta_modem_init(void)
> > >  		AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
> > >  		AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC);
> > >  
> > > -	return platform_device_register(&ams_delta_modem_device);
> > > +	err = platform_device_register(&ams_delta_modem_device);
> > > +	if (err)
> > > +		goto gpio_free;
> > > +	return 0;
> > > +
> > > +gpio_free:
> > > +	gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
> > > +	return err;
> > >  }
> > > -arch_initcall(ams_delta_modem_init);
> > > +late_initcall(late_init);
> > >  
> > >  static void __init ams_delta_map_io(void)
> > >  {
> > > diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
> > > index d4d08bd..835d37a 100644
> > > --- a/drivers/input/serio/ams_delta_serio.c
> > > +++ b/drivers/input/serio/ams_delta_serio.c
> > > @@ -165,7 +165,7 @@ serio:
> > >  	kfree(ams_delta_serio);
> > >  	return err;
> > >  }
> > > -module_init(ams_delta_serio_init);
> > > +late_initcall(ams_delta_serio_init);
> > >  
> > >  static void __exit ams_delta_serio_exit(void)
> > >  {
> > > diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c
> > > index ccb8a6a..be81bc7 100644
> > > --- a/sound/soc/omap/ams-delta.c
> > > +++ b/sound/soc/omap/ams-delta.c
> > > @@ -636,7 +636,7 @@ err:
> > >  	platform_device_put(ams_delta_audio_platform_device);
> > >  	return ret;
> > >  }
> > > -module_init(ams_delta_module_init);
> > > +late_initcall(ams_delta_module_init);
> > >  
> > >  static void __exit ams_delta_module_exit(void)
> > >  {
> > 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/