[PATCHv3 0/3] Synopsys DesignWare GPIO support

[Jamie Iles]

Pretty much the same as last time with the exception that I've split the
IRQ portion from the GPIO bit and added a dependency on IRQ_DOMAIN
rather than selecting it.

The 2nd patch is dependent on Rob's irqdomain support for the generic
irq chip so can be dropped if needed.

Jamie Iles (3):
  gpio: add a driver for the Synopsys DesignWare APB GPIO block
  gpio: dwapb: add support for GPIO interrupts
  ARM: picoxcell: use new Synopsys Designware GPIO binding

 .../devicetree/bindings/gpio/snps-dwapb-gpio.txt   |   63 ++++
 arch/arm/boot/dts/picoxcell-pc3x2.dtsi             |   19 +-
 arch/arm/boot/dts/picoxcell-pc3x3.dtsi             |   28 +-
 drivers/gpio/Kconfig                               |    9 +
 drivers/gpio/Makefile                              |    1 +
 drivers/gpio/gpio-dwapb.c                          |  351 ++++++++++++++++++++
 6 files changed, 443 insertions(+), 28 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
 create mode 100644 drivers/gpio/gpio-dwapb.c

-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/