[PATCH v5 03/12] mfd: twl-core: Add initial DT support for twl4030/twl6030
From: Benoit Cousson
Date: Mon Aug 29 2011 - 10:20:23 EST
Add initial device-tree support for twl familly chips.
The current version is missing the regulator entries due
to the lack of DT regulator bindings for the moment.
Only the simple sub-modules that do not depend on
platform_data information can be initialized properly.
Add irqdomain support.
Add documentation for the Texas Instruments TWL Integrated Chip.
Signed-off-by: Benoit Cousson <b-cousson@xxxxxx>
Cc: Balaji T K <balajitk@xxxxxx>
Cc: Graeme Gregory <gg@xxxxxxxxxxxxxxx>
Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
Acked-by: Rob Herring <rob.herring@xxxxxxxxxxx>
[grant.likely@xxxxxxxxxxxx: Fix IRQ_DOMAIN dependency in kconfig]
Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
---
.../devicetree/bindings/mfd/twl-familly.txt | 47 ++++++++++++++++++
drivers/mfd/Kconfig | 2 +-
drivers/mfd/twl-core.c | 51 +++++++++++++++++++-
3 files changed, 98 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/twl-familly.txt
diff --git a/Documentation/devicetree/bindings/mfd/twl-familly.txt b/Documentation/devicetree/bindings/mfd/twl-familly.txt
new file mode 100644
index 0000000..ff4cacd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl-familly.txt
@@ -0,0 +1,47 @@
+Texas Instruments TWL family
+
+The TWLs are Integrated Power Management Chips.
+Some version might contain much more analog function like
+USB transceiver or Audio amplifier.
+These chips are connected to an i2c bus.
+
+
+Required properties:
+- compatible : Must be "ti,twl4030";
+ For Integrated power-management/audio CODEC device used in OMAP3
+ based boards
+- compatible : Must be "ti,twl6030";
+ For Integrated power-management used in OMAP4 based boards
+- interrupts : This i2c device has an IRQ line connected to the main SoC
+- interrupt-controller : Since the twl support several interrupts internally,
+ it is considered as an interrupt controller cascaded to the SoC one.
+- #interrupt-cells = <1>;
+- interrupt-parent : The parent interrupt controller.
+
+Optional node:
+- Child nodes contain in the twl. The twl family is made of several variants
+ that support a different number of features.
+ The children nodes will thus depend of the capability of the variant.
+
+
+Example:
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+twl@48 {
+ compatible = "ti,twl6030";
+ reg = <0x48>;
+ interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ twl_rtc {
+ compatible = "ti,twl_rtc";
+ interrupts = <11>;
+ reg = <0>;
+ };
+};
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f1391c2..09fea20 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -199,7 +199,7 @@ config MENELAUS
config TWL4030_CORE
bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y && GENERIC_HARDIRQS && IRQ_DOMAIN
help
Say yes here if you have TWL4030 / TWL6030 family chip on your board.
This core driver provides register access and IRQ handling
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index bfbd660..698bf0d 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -34,6 +34,11 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/irqdomain.h>
#include <linux/regulator/machine.h>
@@ -144,6 +149,9 @@
#define TWL_MODULE_LAST TWL4030_MODULE_LAST
+#define TWL4030_NR_IRQS 8
+#define TWL6030_NR_IRQS 20
+
/* Base Address defns for twl4030_map[] */
/* subchip/slave 0 - USB ID */
@@ -255,6 +263,7 @@ struct twl_client {
static struct twl_client twl_modules[TWL_NUM_SLAVES];
+static struct irq_domain domain;
/* mapping the module id to slave id and base address */
struct twl_mapping {
@@ -1183,14 +1192,48 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
int status;
unsigned i;
struct twl4030_platform_data *pdata = client->dev.platform_data;
+ struct device_node *node = client->dev.of_node;
u8 temp;
int ret = 0;
+ int nr_irqs = TWL4030_NR_IRQS;
+
+ if ((id->driver_data) & TWL6030_CLASS)
+ nr_irqs = TWL6030_NR_IRQS;
+
+ if (node && !pdata) {
+ /*
+ * XXX: Temporary pdata until the information is correctly
+ * retrieved by every TWL modules from DT.
+ */
+ pdata = devm_kzalloc(&client->dev,
+ sizeof(struct twl4030_platform_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+ }
if (!pdata) {
dev_dbg(&client->dev, "no platform data?\n");
return -EINVAL;
}
+ status = irq_alloc_descs(-1, pdata->irq_base, nr_irqs, 0);
+ if (IS_ERR_VALUE(status)) {
+ dev_err(&client->dev, "Fail to allocate IRQ descs\n");
+ return status;
+ }
+
+ pdata->irq_base = status;
+ pdata->irq_end = pdata->irq_base + nr_irqs;
+
+ domain.irq_base = pdata->irq_base;
+ domain.nr_irq = nr_irqs;
+#ifdef CONFIG_OF_IRQ
+ domain.of_node = of_node_get(node);
+ domain.ops = &irq_domain_simple_ops;
+#endif
+ irq_domain_add(&domain);
+
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
dev_dbg(&client->dev, "can't talk I2C?\n");
return -EIO;
@@ -1270,7 +1313,13 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1);
}
- status = add_children(pdata, id->driver_data);
+#ifdef CONFIG_OF_DEVICE
+ if (node)
+ status = of_platform_populate(node, NULL, NULL, &client->dev);
+ else
+#endif
+ status = add_children(pdata, id->driver_data);
+
fail:
if (status < 0)
twl_remove(client);
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/