[PATCH v2 2/5] xen: use this_cpu_xxx replace percpu_xxx funcs

From: Alex Shi
Date: Fri Jan 13 2012 - 10:47:56 EST


percpu_xxx funcs are duplicated with this_cpu_xxx funcs, so replace them
for further code clean up.

I don't know much of xen code. But, since the code is in x86 architecture,
the percpu_xxx is exactly same as this_cpu_xxx serials functions. So, the
change is safe.

Signed-off-by: Alex Shi <alex.shi@xxxxxxxxx>
Acked-by: Christoph Lameter <cl@xxxxxxxxxx>
Acked-by: Tejun Heo <tj@xxxxxxxxxx>
---
arch/x86/xen/enlighten.c | 6 +++---
arch/x86/xen/irq.c | 8 ++++----
arch/x86/xen/mmu.c | 20 ++++++++++----------
arch/x86/xen/multicalls.h | 2 +-
arch/x86/xen/smp.c | 2 +-
5 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 12eb07b..312c9e3 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -777,11 +777,11 @@ static DEFINE_PER_CPU(unsigned long, xen_cr0_value);

static unsigned long xen_read_cr0(void)
{
- unsigned long cr0 = percpu_read(xen_cr0_value);
+ unsigned long cr0 = this_cpu_read(xen_cr0_value);

if (unlikely(cr0 == 0)) {
cr0 = native_read_cr0();
- percpu_write(xen_cr0_value, cr0);
+ this_cpu_write(xen_cr0_value, cr0);
}

return cr0;
@@ -791,7 +791,7 @@ static void xen_write_cr0(unsigned long cr0)
{
struct multicall_space mcs;

- percpu_write(xen_cr0_value, cr0);
+ this_cpu_write(xen_cr0_value, cr0);

/* Only pay attention to cr0.TS; everything else is
ignored. */
diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c
index 8bbb465..1573376 100644
--- a/arch/x86/xen/irq.c
+++ b/arch/x86/xen/irq.c
@@ -26,7 +26,7 @@ static unsigned long xen_save_fl(void)
struct vcpu_info *vcpu;
unsigned long flags;

- vcpu = percpu_read(xen_vcpu);
+ vcpu = this_cpu_read(xen_vcpu);

/* flag has opposite sense of mask */
flags = !vcpu->evtchn_upcall_mask;
@@ -50,7 +50,7 @@ static void xen_restore_fl(unsigned long flags)
make sure we're don't switch CPUs between getting the vcpu
pointer and updating the mask. */
preempt_disable();
- vcpu = percpu_read(xen_vcpu);
+ vcpu = this_cpu_read(xen_vcpu);
vcpu->evtchn_upcall_mask = flags;
preempt_enable_no_resched();

@@ -72,7 +72,7 @@ static void xen_irq_disable(void)
make sure we're don't switch CPUs between getting the vcpu
pointer and updating the mask. */
preempt_disable();
- percpu_read(xen_vcpu)->evtchn_upcall_mask = 1;
+ this_cpu_read(xen_vcpu)->evtchn_upcall_mask = 1;
preempt_enable_no_resched();
}
PV_CALLEE_SAVE_REGS_THUNK(xen_irq_disable);
@@ -86,7 +86,7 @@ static void xen_irq_enable(void)
the caller is confused and is trying to re-enable interrupts
on an indeterminate processor. */

- vcpu = percpu_read(xen_vcpu);
+ vcpu = this_cpu_read(xen_vcpu);
vcpu->evtchn_upcall_mask = 0;

/* Doesn't matter if we get preempted here, because any
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 58a0e46..1a309ee 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1071,14 +1071,14 @@ static void drop_other_mm_ref(void *info)
struct mm_struct *mm = info;
struct mm_struct *active_mm;

- active_mm = percpu_read(cpu_tlbstate.active_mm);
+ active_mm = this_cpu_read(cpu_tlbstate.active_mm);

- if (active_mm == mm && percpu_read(cpu_tlbstate.state) != TLBSTATE_OK)
+ if (active_mm == mm && this_cpu_read(cpu_tlbstate.state) != TLBSTATE_OK)
leave_mm(smp_processor_id());

/* If this cpu still has a stale cr3 reference, then make sure
it has been flushed. */
- if (percpu_read(xen_current_cr3) == __pa(mm->pgd))
+ if (this_cpu_read(xen_current_cr3) == __pa(mm->pgd))
load_cr3(swapper_pg_dir);
}

@@ -1185,17 +1185,17 @@ static void __init xen_pagetable_setup_done(pgd_t *base)

static void xen_write_cr2(unsigned long cr2)
{
- percpu_read(xen_vcpu)->arch.cr2 = cr2;
+ this_cpu_read(xen_vcpu)->arch.cr2 = cr2;
}

static unsigned long xen_read_cr2(void)
{
- return percpu_read(xen_vcpu)->arch.cr2;
+ return this_cpu_read(xen_vcpu)->arch.cr2;
}

unsigned long xen_read_cr2_direct(void)
{
- return percpu_read(xen_vcpu_info.arch.cr2);
+ return this_cpu_read(xen_vcpu_info.arch.cr2);
}

static void xen_flush_tlb(void)
@@ -1278,12 +1278,12 @@ static void xen_flush_tlb_others(const struct cpumask *cpus,

static unsigned long xen_read_cr3(void)
{
- return percpu_read(xen_cr3);
+ return this_cpu_read(xen_cr3);
}

static void set_current_cr3(void *v)
{
- percpu_write(xen_current_cr3, (unsigned long)v);
+ this_cpu_write(xen_current_cr3, (unsigned long)v);
}

static void __xen_write_cr3(bool kernel, unsigned long cr3)
@@ -1306,7 +1306,7 @@ static void __xen_write_cr3(bool kernel, unsigned long cr3)
xen_extend_mmuext_op(&op);

if (kernel) {
- percpu_write(xen_cr3, cr3);
+ this_cpu_write(xen_cr3, cr3);

/* Update xen_current_cr3 once the batch has actually
been submitted. */
@@ -1322,7 +1322,7 @@ static void xen_write_cr3(unsigned long cr3)

/* Update while interrupts are disabled, so its atomic with
respect to ipis */
- percpu_write(xen_cr3, cr3);
+ this_cpu_write(xen_cr3, cr3);

__xen_write_cr3(true, cr3);

diff --git a/arch/x86/xen/multicalls.h b/arch/x86/xen/multicalls.h
index dee79b7..9c2e74f 100644
--- a/arch/x86/xen/multicalls.h
+++ b/arch/x86/xen/multicalls.h
@@ -47,7 +47,7 @@ static inline void xen_mc_issue(unsigned mode)
xen_mc_flush();

/* restore flags saved in xen_mc_batch */
- local_irq_restore(percpu_read(xen_mc_irq_flags));
+ local_irq_restore(this_cpu_read(xen_mc_irq_flags));
}

/* Set up a callback to be called when the current batch is flushed */
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 041d4fe..449f868 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -76,7 +76,7 @@ static void __cpuinit cpu_bringup(void)
xen_setup_cpu_clockevents();

set_cpu_online(cpu, true);
- percpu_write(cpu_state, CPU_ONLINE);
+ this_cpu_write(cpu_state, CPU_ONLINE);
wmb();

/* We can take interrupts now: we're officially "up". */
--
1.6.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/