Re: [PATCH] mmc: change mmc_delay() to use usleep_range()

[Aaro Koskinen]

Hi,

On Fri, 13 Jan 2012, Dmitry Antipov wrote:
> Use the usleep_range() to simplify mmc_delay() and give some more
> accuracy to it - but with an exception of mmc_card_sleepawake():
> since sleep/awake timeout varies in a wide range, different
> delay methods should be used.
>
> Signed-off-by: Dmitry Antipov <dmitry.antipov@xxxxxxxxxx>

[...]

> +	if (!(host->caps & MMC_CAP_WAIT_WHILE_BUSY)) {
> +		/* JEDEC MMCA 4.41 specifies the timeout value is in 200ns..838.86ms
> +		   range. Round it up to 1us and use an appropriate delay method. */
> +		unsigned long us = DIV_ROUND_UP(card->ext_csd.sa_timeout, 10);
> +		if (us < 10)
> +			udelay(us);
> +		else
> +			usleep_range(us, us + 100);
> +	}

I think this part of the patch is over-engineered. What difference
does it make in practice if you round it up to a bigger value so that
usleep_range() makes always sense? The S/A timeout defines the max time
the transition can take, it's not wrong to wait a bit longer. Also note
that udelay() is not accurate so you need to add some margin anyway.

A.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/