Re: [Intel-gfx] [PATCH] drm/i915: set AUD_CONFIG N_value_index for DisplayPort

From: Keith Packard
Date: Mon Jan 16 2012 - 18:15:26 EST


On Tue, 17 Jan 2012 07:08:09 +0800, Wu Fengguang <fengguang.wu@xxxxxxxxx> wrote:
> On Mon, Jan 16, 2012 at 12:44:43PM -0800, Keith Packard wrote:
> > On Mon, 16 Jan 2012 21:26:18 +0100, Daniel Vetter <daniel@xxxxxxxx> wrote:
> >
> > > Keith, does this address your concern and this patch is r-b: Keith or do
> > > we want an
> > >
> > > } else {
> > > I915_WRITE(aud_config, 0);
> > > }
> > >
> > > for paranoia?
> >
> > I think we want this added, just to be sure we set the configuration
> > correctly in all cases; it's easy to imagine moving from DP to HDMI and
> > leaving this bit set.
>
> Ah good point! Here is the updated patch.
>
> ---
> Subject: drm/i915: set AUD_CONFIG N_value_index for DisplayPort
> Date: Fri Jan 06 14:41:31 CST 2012
>
> It should be programmed to "0" for HDMI or "1" for DisplayPort.
>
> This enables DisplayPort audio for
>
> - HP EliteBook 8460p
> (whose BIOS does not set the N_value_index bit for us)
>
> - DisplayPort monitor hot plugged after boot
> (otherwise most BIOS will fill the N_value_index bit for us)
>
> Tested-by: Robert Lemaire <rlemaire@xxxxxxxx>
> Signed-off-by: Wu Fengguang <fengguang.wu@xxxxxxxxx>

Reviewed-by: Keith Packard <keithp@xxxxxxxxxx>

> ---
> drivers/gpu/drm/i915/i915_reg.h | 12 ++++++++++++
> drivers/gpu/drm/i915/intel_display.c | 8 +++++++-
> 2 files changed, 19 insertions(+), 1 deletion(-)
>
> --- linux.orig/drivers/gpu/drm/i915/i915_reg.h 2012-01-07 23:11:10.000000000 +0800
> +++ linux/drivers/gpu/drm/i915/i915_reg.h 2012-01-10 13:20:17.000000000 +0800
> @@ -3582,4 +3582,16 @@
> #define CPT_AUD_CNTL_ST_A 0xE50B4
> #define CPT_AUD_CNTRL_ST2 0xE50C0
>
> +#define IBX_AUD_CONFIG_A 0xe2000
> +#define CPT_AUD_CONFIG_A 0xe5000
> +#define AUD_CONFIG_N_VALUE_INDEX (1 << 29)
> +#define AUD_CONFIG_N_PROG_ENABLE (1 << 28)
> +#define AUD_CONFIG_UPPER_N_SHIFT 20
> +#define AUD_CONFIG_UPPER_N_VALUE (0xff << 20)
> +#define AUD_CONFIG_LOWER_N_SHIFT 4
> +#define AUD_CONFIG_LOWER_N_VALUE (0xfff << 4)
> +#define AUD_CONFIG_PIXEL_CLOCK_HDMI_SHIFT 16
> +#define AUD_CONFIG_PIXEL_CLOCK_HDMI (0xf << 16)
> +#define AUD_CONFIG_DISABLE_NCTS (1 << 3)
> +
> #endif /* _I915_REG_H_ */
> --- linux.orig/drivers/gpu/drm/i915/intel_display.c 2012-01-07 23:11:10.000000000 +0800
> +++ linux/drivers/gpu/drm/i915/intel_display.c 2012-01-17 07:06:29.000000000 +0800
> @@ -5908,15 +5908,18 @@ static void ironlake_write_eld(struct dr
> uint32_t i;
> int len;
> int hdmiw_hdmiedid;
> + int aud_config;
> int aud_cntl_st;
> int aud_cntrl_st2;
>
> if (HAS_PCH_IBX(connector->dev)) {
> hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A;
> + aud_config = IBX_AUD_CONFIG_A;
> aud_cntl_st = IBX_AUD_CNTL_ST_A;
> aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
> } else {
> hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A;
> + aud_config = CPT_AUD_CONFIG_A;
> aud_cntl_st = CPT_AUD_CNTL_ST_A;
> aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
> }
> @@ -5924,6 +5927,7 @@ static void ironlake_write_eld(struct dr
> i = to_intel_crtc(crtc)->pipe;
> hdmiw_hdmiedid += i * 0x100;
> aud_cntl_st += i * 0x100;
> + aud_config += i * 0x100;
>
> DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(i));
>
> @@ -5943,7 +5947,9 @@ static void ironlake_write_eld(struct dr
> if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
> DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
> eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
> - }
> + I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
> + } else
> + I915_WRITE(aud_config, 0);
>
> if (intel_eld_uptodate(connector,
> aud_cntrl_st2, eldv,

--
keith.packard@xxxxxxxxx

Attachment: pgp00000.pgp
Description: PGP signature