[PATCH v2 1/2] leds-lm3530: set the value of max_brightness to127

[Kim, Milo]

Only 7 bits are used for the brightness. (register address : A0h)
So the max_brightness property of lm3530 should be set to 127.

On initializing registers, maximum initial brightness is limited to 'max_brightness'.

Division-by-two is removed on updating the value of brightness.
This arithmetic is not necessary because the range of brightness is 0 ~ 127.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@xxxxxx>
---
 drivers/leds/leds-lm3530.c |   22 +++++++++++-----------
 1 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index a7f24f7..7005a5f 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -153,11 +153,11 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
 	u8 als_imp_sel = 0;
 	u8 brightness;
 	u8 reg_val[LM3530_REG_MAX];
-	struct lm3530_platform_data *pdata = drvdata->pdata;
+	struct lm3530_platform_data *pltfm = drvdata->pdata;
 	struct i2c_client *client = drvdata->client;
 
-	gen_config = (pdata->brt_ramp_law << LM3530_RAMP_LAW_SHIFT) |
-			((pdata->max_current & 7) << LM3530_MAX_CURR_SHIFT);
+	gen_config = (pltfm->brt_ramp_law << LM3530_RAMP_LAW_SHIFT) |
+			((pltfm->max_current & 7) << LM3530_MAX_CURR_SHIFT);
 
 	if (drvdata->mode == LM3530_BL_MODE_MANUAL ||
 	    drvdata->mode == LM3530_BL_MODE_ALS)
@@ -165,27 +165,27 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
 
 	if (drvdata->mode == LM3530_BL_MODE_ALS) {
 		als_config =
-			(pdata->als_avrg_time << LM3530_ALS_AVG_TIME_SHIFT) |
+			(pltfm->als_avrg_time << LM3530_ALS_AVG_TIME_SHIFT) |
 			(LM3530_ENABLE_ALS) |
-			(pdata->als_input_mode << LM3530_ALS_SEL_SHIFT);
+			(pltfm->als_input_mode << LM3530_ALS_SEL_SHIFT);
 
 		als_imp_sel =
-			(pdata->als1_resistor_sel << LM3530_ALS1_IMP_SHIFT) |
-			(pdata->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT);
+			(pltfm->als1_resistor_sel << LM3530_ALS1_IMP_SHIFT) |
+			(pltfm->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT);
 	}
 
 	if (drvdata->mode == LM3530_BL_MODE_PWM)
 		gen_config |= (LM3530_ENABLE_PWM) |
-				(pdata->pwm_pol_hi << LM3530_PWM_POL_SHIFT) |
+				(pltfm->pwm_pol_hi << LM3530_PWM_POL_SHIFT) |
 				(LM3530_ENABLE_PWM_SIMPLE);
 
-	brt_ramp = (pdata->brt_ramp_fall << LM3530_BRT_RAMP_FALL_SHIFT) |
-			(pdata->brt_ramp_rise << LM3530_BRT_RAMP_RISE_SHIFT);
+	brt_ramp = (pltfm->brt_ramp_fall << LM3530_BRT_RAMP_FALL_SHIFT) |
+			(pltfm->brt_ramp_rise << LM3530_BRT_RAMP_RISE_SHIFT);
 
 	if (drvdata->brightness)
 		brightness = drvdata->brightness;
 	else
-		brightness = drvdata->brightness = pdata->brt_val;
+		brightness = drvdata->brightness = pltfm->brt_val;
 
 	if (brightness > drvdata->led_dev.max_brightness)
 		brightness = drvdata->led_dev.max_brightness;
-- 
1.7.4.1


Best Regards,
Milo (Woogyom) Kim
Texas Instruments Incorporated


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/