RE: [PATCH 3/4] leds-lp5521: support led pattern data

From: Kim, Milo
Date: Thu Jan 26 2012 - 21:23:07 EST


Add Arun, Srinidhi, Linus and Andrew on CC

> -----Original Message-----
> From: Kim, Milo
> Sent: Sunday, January 22, 2012 3:10 AM
> To: 'linux-kernel@xxxxxxxxxxxxxxx'; 'rpurdie@xxxxxxxxx'
> Subject: [PATCH 3/4] leds-lp5521: support led pattern data
>
> The lp5521 has autonomous operation mode without external control.
> Using lp5521_platform_data, various led patterns can be configurable.
> For supporting this feature, new functions and device attribute are
> added.
>
> Structure of lp5521_led_pattern: 3 channels are supported - red, green
> and blue.
> Pattern(s) of each channel and numbers of pattern(s) are defined in the
> platform data.
> Pattern data are hexa codes which include pattern commands such like
> set pwm, wait, ramp up/down, branch and so on.
>
> Pattern mode functions:
> * lp5521_clear_program_memory
> Before running new led pattern, program memory should be cleared.
> * lp5521_write_program_memory
> Pattern data updated in the program memory via the i2c.
> * lp5521_get_pattern
> Get pattern from predefined in the platform data.
> * lp5521_run_led_pattern
> Stop current pattern or run new pattern.
> Transition time is required between different operation mode.
>
> Device attribute - 'led_pattern':
> To load specific led pattern, new device attribute is added.
>
> When the lp5521 driver is unloaded, stop current led pattern mode.
>
> Documentation updated : description about how to define the led
> patterns and example.
>
> Signed-off-by: Milo(Woogyom) Kim <milo.kim@xxxxxx>
> ---
> Documentation/leds/leds-lp5521.txt | 38 ++++++++++++++
> drivers/leds/leds-lp5521.c | 100
> ++++++++++++++++++++++++++++++++++++
> include/linux/leds-lp5521.h | 11 ++++
> 3 files changed, 149 insertions(+), 0 deletions(-)
>
> diff --git a/Documentation/leds/leds-lp5521.txt
> b/Documentation/leds/leds-lp5521.txt
> index e3c66c6..0e542ab 100644
> --- a/Documentation/leds/leds-lp5521.txt
> +++ b/Documentation/leds/leds-lp5521.txt
> @@ -111,3 +111,41 @@ static struct lp5521_platform_data lp5521_pdata =
> {
> .clock_mode = LP5521_CLOCK_INT,
> .update_config = LP5521_CONFIGS,
> };
> +
> +LED patterns : LP5521 has autonomous operation without external
> control.
> +Pattern data can be defined in the platform data.
> +
> +example of led pattern data :
> +
> +/* RGB(50,5,0) 500ms on, 500ms off, infinite loop */
> +static u8 pattern_red[] = {
> + 0x40, 0x32, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00,
> + };
> +
> +static u8 pattern_green[] = {
> + 0x40, 0x05, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00,
> + };
> +
> +static struct lp5521_led_pattern board_led_patterns[] = {
> + {
> + .r = pattern_red,
> + .g = pattern_green,
> + .size_r = ARRAY_SIZE(pattern_red),
> + .size_g = ARRAY_SIZE(pattern_green),
> + },
> +};
> +
> +static struct lp5521_platform_data lp5521_platform_data = {
> + .led_config = lp5521_led_config,
> + .num_channels = ARRAY_SIZE(lp5521_led_config),
> + .clock_mode = LP5521_CLOCK_EXT,
> + .patterns = board_led_patterns,
> + .num_patterns = ARRAY_SIZE(board_led_patterns),
> +};
> +
> +Then predefined led pattern(s) can be executed via the sysfs.
> +To start the pattern #1,
> +# echo 1 > /sys/bus/i2c/devices/xxxx/led_pattern
> +(xxxx : i2c bus & slave address)
> +To end the pattern,
> +# echo 0 > /sys/bus/i2c/devices/xxxx/led_pattern
> diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
> index 4fa792d..471cef1 100644
> --- a/drivers/leds/leds-lp5521.c
> +++ b/drivers/leds/leds-lp5521.c
> @@ -85,6 +85,9 @@
> /* Status */
> #define LP5521_EXT_CLK_USED 0x08
>
> +/* Pattern Mode */
> +#define PATTERN_OFF 0
> +
> struct lp5521_engine {
> int id;
> u8 mode;
> @@ -522,6 +525,100 @@ static ssize_t lp5521_selftest(struct device *dev,
> return sprintf(buf, "%s\n", ret ? "FAIL" : "OK");
> }
>
> +static void lp5521_clear_program_memory(struct i2c_client *cl)
> +{
> + int i;
> + u8 rgb_mem[] = {
> + LP5521_REG_R_PROG_MEM,
> + LP5521_REG_G_PROG_MEM,
> + LP5521_REG_B_PROG_MEM,
> + };
> +
> + for (i = 0; i < ARRAY_SIZE(rgb_mem); i++) {
> + lp5521_write(cl, rgb_mem[i], 0);
> + lp5521_write(cl, rgb_mem[i] + 1, 0);
> + }
> +}
> +
> +static void lp5521_write_program_memory(struct i2c_client *cl,
> + u8 base, u8 *rgb, int size)
> +{
> + int i;
> +
> + if (!rgb || size <= 0)
> + return;
> +
> + for (i = 0; i < size; i++)
> + lp5521_write(cl, base + i, *(rgb + i));
> +
> + lp5521_write(cl, base + i, 0);
> + lp5521_write(cl, base + i + 1, 0);
> +}
> +
> +static inline struct lp5521_led_pattern *lp5521_get_pattern
> + (struct lp5521_chip *chip, u8 offset)
> +{
> + struct lp5521_led_pattern *ptn;
> + ptn = chip->pdata->patterns + (offset - 1);
> + return ptn;
> +}
> +
> +static void lp5521_run_led_pattern(int mode, struct lp5521_chip *chip)
> +{
> + struct lp5521_led_pattern *ptn;
> + struct i2c_client *cl = chip->client;
> + int num_patterns = chip->pdata->num_patterns;
> +
> + if (mode > num_patterns || !(chip->pdata->patterns))
> + return;
> +
> + if (mode == PATTERN_OFF) {
> + lp5521_write(cl, LP5521_REG_ENABLE,
> + LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM);
> + usleep_range(1000, 2000);
> + lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
> + } else {
> + ptn = lp5521_get_pattern(chip, mode);
> + if (!ptn)
> + return;
> +
> + lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_LOAD);
> + usleep_range(1000, 2000);
> +
> + lp5521_clear_program_memory(cl);
> +
> + lp5521_write_program_memory(cl, LP5521_REG_R_PROG_MEM,
> + ptn->r, ptn->size_r);
> + lp5521_write_program_memory(cl, LP5521_REG_G_PROG_MEM,
> + ptn->g, ptn->size_g);
> + lp5521_write_program_memory(cl, LP5521_REG_B_PROG_MEM,
> + ptn->b, ptn->size_b);
> +
> + lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_RUN);
> + usleep_range(1000, 2000);
> + lp5521_write(cl, LP5521_REG_ENABLE,
> + LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM |
> + LP5521_EXEC_RUN);
> + }
> +}
> +
> +static ssize_t store_led_pattern(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t len)
> +{
> + struct lp5521_chip *chip = i2c_get_clientdata(to_i2c_client(dev));
> + unsigned long val;
> + int ret;
> +
> + ret = strict_strtoul(buf, 16, &val);
> + if (ret)
> + return ret;
> +
> + lp5521_run_led_pattern(val, chip);
> +
> + return len;
> +}
> +
> /* led class device attributes */
> static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, show_current,
> store_current);
> static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
> @@ -547,6 +644,7 @@ static DEVICE_ATTR(engine1_load, S_IWUSR, NULL,
> store_engine1_load);
> static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load);
> static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load);
> static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL);
> +static DEVICE_ATTR(led_pattern, S_IWUSR, NULL, store_led_pattern);
>
> static struct attribute *lp5521_attributes[] = {
> &dev_attr_engine1_mode.attr,
> @@ -556,6 +654,7 @@ static struct attribute *lp5521_attributes[] = {
> &dev_attr_engine1_load.attr,
> &dev_attr_engine2_load.attr,
> &dev_attr_engine3_load.attr,
> + &dev_attr_led_pattern.attr,
> NULL
> };
>
> @@ -743,6 +842,7 @@ static int lp5521_remove(struct i2c_client *client)
> struct lp5521_chip *chip = i2c_get_clientdata(client);
> int i;
>
> + lp5521_run_led_pattern(PATTERN_OFF, chip);
> lp5521_unregister_sysfs(client);
>
> for (i = 0; i < chip->num_leds; i++) {
> diff --git a/include/linux/leds-lp5521.h b/include/linux/leds-lp5521.h
> index e9ab583..3f071ec 100644
> --- a/include/linux/leds-lp5521.h
> +++ b/include/linux/leds-lp5521.h
> @@ -32,6 +32,15 @@ struct lp5521_led_config {
> u8 max_current;
> };
>
> +struct lp5521_led_pattern {
> + u8 *r;
> + u8 *g;
> + u8 *b;
> + u8 size_r;
> + u8 size_g;
> + u8 size_b;
> +};
> +
> #define LP5521_CLOCK_AUTO 0
> #define LP5521_CLOCK_INT 1
> #define LP5521_CLOCK_EXT 2
> @@ -57,6 +66,8 @@ struct lp5521_platform_data {
> void (*enable)(bool state);
> const char *label;
> u8 update_config;
> + struct lp5521_led_pattern *patterns;
> + int num_patterns;
> };
>
> #endif /* __LINUX_LP5521_H */
> --
> 1.7.4.1
>
>
> Best Regards,
> Milo (Woogyom) Kim
> Texas Instruments Incorporated


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/