[PATCH v2 4/7] LPC32xx: clock.c: MMC update

[Roland Stigge]

This patch updates MMC clocking in clock.c:
* No manual MMC clock enable/disable on MMC register access necessary
  (it's the MMC IP clock, not the MMC CLK signal rate)  
* Added comments

Signed-off-by: Roland Stigge <stigge@xxxxxxxxx>

diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
index 17709ca..229bec5 100644
--- a/arch/arm/mach-lpc32xx/clock.c
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -738,14 +738,9 @@ static int mmc_onoff_enable(struct clk *clk, int enable)
 
 static unsigned long mmc_get_rate(struct clk *clk)
 {
-	u32 div, rate, oldclk;
+	u32 div, rate;
 
-	/* The MMC clock must be on when accessing an MMC register */
-	oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
-	__raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
-		LPC32XX_CLKPWR_MS_CTRL);
 	div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
-	__raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
 
 	/* Get the parent clock rate */
 	rate = clk->parent->get_rate(clk->parent);
@@ -773,32 +768,36 @@ static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate)
 	if (div > 0xf)
 		div = 0xf;
 
+	/*
+	 * The divider is forced to 1 to keep the SD clock granularity
+	 * good. Using a non-0 divider will limit the SD card clock rates
+	 * the SD driver can generate. Remove it if your feeling crazy.
+	 */
+	div = 1;
+
 	return prate / div;
 }
 
 static int mmc_set_rate(struct clk *clk, unsigned long rate)
 {
-	u32 oldclk, tmp;
+	u32 tmp;
 	unsigned long prate, div, crate = mmc_round_rate(clk, rate);
 
 	prate = clk->parent->get_rate(clk->parent);
 
 	div = prate / crate;
 
-	/* The MMC clock must be on when accessing an MMC register */
-	oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
-	__raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
-		LPC32XX_CLKPWR_MS_CTRL);
 	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
 		~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
 	tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div);
 	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
 
-	__raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
-
 	return 0;
 }
 
+/*
+ * This is the MMC IP clock, not the MMC CLK signal rate!
+ */
 static struct clk clk_mmc = {
 	.parent		= &clk_armpll,
 	.set_rate	= mmc_set_rate,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/