Re: [PATCH 2/3] i2c: Add Congatec CGEB I2C driver

[Sascha Hauer]

On Tue, Feb 07, 2012 at 11:10:16AM +0100, Wolfram Sang wrote:
> Hi Sascha,
> 
> > +config I2C_CONGATEC_CGEB
> > +	tristate "Congatec CGEB I2C driver"
> > +	depends on MFD_CONGATEC_CGEB
> > +	help
> > +	  This driver provides support for the I2C busses accssable via
> > +	  the Congatec CGEB interface found on Congatec boards.
> > +
> 
> Please keep the sorting (eg20t is wrong and will be fixed).
> 
> > +		ret = cgeb_call(priv->board, &fps, CgebI2CTransfer);
> > +		if (ret) {
> > +			ret = -EREMOTEIO;
> > +			goto out;
> > +		}
> 
> -EREMOTEIO is not present in Documentation/i2c/fault-codes. Please use
> one from that file.

-EIO?

> 
> > +	ret = cgeb_i2c_set_speed(priv, 400000);
> > +	if (ret)
> > +		/*
> > +		 * not a critical error, we can continue with the default speed.
> > +		 */
> > +		dev_warn(&pdev->dev, "Could not set speed to 400KHz\n");
> 
> Is it possible to make this configurable? Not all I2C devices support
> 400KHz, 100KHz is OK.

Yes, it is. The problem is more *how* it should be configurable.
Exposing it via sysfs is the only reasonable option I can think
of.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/