Re: [PATCH v1 2/5] mmc: mxs-mmc: add dt probe support

From: Jean-Christophe PLAGNIOL-VILLARD
Date: Wed Mar 14 2012 - 03:36:06 EST


On 16:47 Tue 13 Mar , Dong Aisheng wrote:
> From: Dong Aisheng <dong.aisheng@xxxxxxxxxx>
>
> Signed-off-by: Dong Aisheng <dong.aisheng@xxxxxxxxxx>
>
> ---
> The patch is still using a private way for dma part binding
> since the common dma binding is still under discussion.
> http://www.spinics.net/lists/linux-omap/msg65528.html
>
> Will update to use common dma binding when it hits mainline.
> ---
> .../devicetree/bindings/mmc/fsl-mxs-mmc.txt | 23 ++++++
> drivers/mmc/host/mxs-mmc.c | 82 +++++++++++++++++++-
> 2 files changed, 102 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/fsl-mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/fsl-mxs-mmc.txt
> new file mode 100644
> index 0000000..adc1142
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/fsl-mxs-mmc.txt
> @@ -0,0 +1,23 @@
> +* FREESCALE MXS MMC peripheral
> +
> +Required properties:
> +- compatible : Should be "fsl,<chip>-mmc"
> +- reg : Should contain registers location and length
> +- interrupts : Should contain interrupt.
> + The format is <irq_err irq_dma>.
> +- dma_channel: Should contain the dma channel it uses
> +
> +Optional properties:
> +- wp-gpios : Specify GPIOs for write protection
> +- slot-4bit: Specify 4 bit mode support
> +- slot-8bit: Specify 8 bit and 4 bit mode support
> +
> +Examples:
> +mmc1: ssp@80010000 {
> + compatible = "fsl,imx28-mmc";
> + reg = <0x80010000 2000>;
> + /* <irq_err irq_dma> */
> + interrupts = <96 82>;
> + dma_channel = <0>;
> + slot-8bit;
> +};
> diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
> index 382c835..6cf2d17 100644
> --- a/drivers/mmc/host/mxs-mmc.c
> +++ b/drivers/mmc/host/mxs-mmc.c
> @@ -38,6 +38,10 @@
> #include <linux/gpio.h>
> #include <linux/regulator/consumer.h>
> #include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/slab.h>
>
> #include <mach/mxs.h>
> #include <mach/common.h>
> @@ -673,17 +677,79 @@ static bool mxs_mmc_dma_filter(struct dma_chan *chan, void *param)
> return true;
> }
>
> +#ifdef CONFIG_OF
> +static struct resource * __devinit mxs_mmc_get_of_dmares(
> + struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct resource *dmares;
> + int ret;
> +
> + if (!np)
> + return NULL;
> +
> + dmares = kzalloc(sizeof(*dmares), GFP_KERNEL);
> + dmares->flags = IORESOURCE_DMA;
> + ret = of_property_read_u32(np, "dma_channel", &dmares->start);
> + if (ret) {
> + dev_err(&pdev->dev, "unable to get dmares from dt\n");
> + return NULL;
> + }
> + dmares->end = dmares->start;
> +
> + return dmares;
> +}
> +
> +static int __devinit mxs_mmc_get_of_property(struct platform_device *pdev,
> + struct mxs_mmc_platform_data **ppdata)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct mxs_mmc_platform_data *pdata = *ppdata;
> +
> + if (!np)
> + return -ENODEV;
> +
> + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
> +
> + if (of_get_property(np, "slot-8bit", NULL))
> + pdata->flags |= SLOTF_8_BIT_CAPABLE;
> +
> + if (of_get_property(np, "slot-4bit", NULL))
> + pdata->flags |= SLOTF_4_BIT_CAPABLE;
it will conflit if both binding are set use a number instead

Best Regards,
J.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/