Re: [PATCH] Support M95040 SPI EEPROM

[Wolfram Sang]

On Wed, Mar 21, 2012 at 10:30:22AM -0700, Chris Wright wrote:
> * Ivo Sieben (meltedpianoman@xxxxxxxxx) wrote:
> > Updated the generic SPI EEPROM driver AT25 for support of address bit A8
> > in the instruction byte. Certain EEPROMS (like M95040 from ST) have a 512
> > Byte size but use only one address byte (A0 to A7) for addressing. For the
> > extra address bit A8 bit 3 of the instruction byte is used. This instruction
> > bit is threated as don't care for other AT25 like chips
> 
> The AT25 datasheet lists that bit in READ and PROGRAM(write) as don't
> care, and the MV950x0 datasheet says just what you've said above (BTW,
> it's "treated" not "threated").  How confident are you that this logic
> will not cause problems for existing non-MV95040 chips?

I was thinking the same. We should not make this behaviour default, but
optional. My idea would be another flag, i.e. EE_INSTR_BIT3_IS_ADDR. I'd think
the code could then also easily be written in a way, that it gives 17 and 25
bit addresses for free.

Regards,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

Attachment: signature.asc
Description: Digital signature