Re: [PATCH-v3] Support M95040 SPI EEPROM

[Chris Wright]

* Wolfram Sang (w.sang@xxxxxxxxxxxxxx) wrote:
> On Tue, Apr 03, 2012 at 09:53:20AM -0700, Chris Wright wrote:
> > * Ivo Sieben (meltedpianoman@xxxxxxxxx) wrote:
> > > +	instr = AT25_READ;
> > > +	if (at25->chip.flags & EE_INSTR_BIT3_IS_ADDR)
> > > +		if (offset >= (1U << (at25->addrlen * 8)))
> > > +			instr |= AT25_INSTR_BIT3;
> > > +	*cp++ = instr;
> > <snip>
> > > +	/*
> > > +	 * Certain EEPROMS have a size that is larger than the number of address
> > > +	 * bytes would allow (e.g. like M95040 from ST that has 512 Byte size
> > > +	 * but uses only one address byte (A0 to A7) for addressing.) For
> > > +	 * the extra address bit (A8, A16 or A24) bit 3 of the instruction byte
> > > +	 * is used. This instruction bit is normally defined as don't care for
> > > +	 * other AT25 like chips.
> > > +	 */
> > > +#define EE_INSTR_BIT3_IS_ADDR	0x0010
> > 
> > Is there some guarantee that this chip flag will always have this
> > meaning?
> 
> ? This is a driver flag.

Sorry, I don't see it set anywhere, so unclear on where it comes from.
I thought it was from a generic spi probe.

thanks,
-chris
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/