Re: [PATCH 1/2] ACPI: Convert wake_sleep_flags to a value insteadof function (v2)

[Lin Ming]

On Mon, 2012-04-09 at 22:34 -0400, Konrad Rzeszutek Wilk wrote:
> With commit a2ef5c4fd44ce3922435139393b89f2cce47f576
> "ACPI: Move module parameter gts and bfs to sleep.c" the wake_sleep_flags
> is required when calling acpi_enter_sleep_state, which means
> that if there are functions outside the sleep.c code they
> can't get get the wake_sleep_flags values.
> 
> This converts the function in to a exported value and converts
> the module config operands to a function.
> 
> [v2: Parameters can be turned on/off dynamically]
> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
> ---
>  arch/x86/kernel/acpi/sleep.h |    2 +
>  drivers/acpi/sleep.c         |   52 ++++++++++++++++++++++-------------------
>  2 files changed, 30 insertions(+), 24 deletions(-)
> 
> diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h
> index 4d3feb5..7bab5fb 100644
> --- a/arch/x86/kernel/acpi/sleep.h
> +++ b/arch/x86/kernel/acpi/sleep.h
> @@ -9,6 +9,8 @@ extern long saved_magic;
>  
>  extern int wakeup_pmode_return;
>  
> +extern unsigned char wake_sleep_flags;
> +

Could you use "u8" same as the definition below?

Others look good to me.

Acked-by: Lin Ming <ming.m.lin@xxxxxxxxx>

Thanks,
Lin Ming

>  extern unsigned long acpi_copy_wakeup_routine(unsigned long);
>  extern void wakeup_long64(void);
>  
> diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
> index 6a8d4d3..86bf909 100644
> --- a/drivers/acpi/sleep.c
> +++ b/drivers/acpi/sleep.c
> @@ -28,23 +28,33 @@
>  #include "internal.h"
>  #include "sleep.h"
>  
> +u8 wake_sleep_flags = ACPI_NO_OPTIONAL_METHODS;
>  static unsigned int gts, bfs;
> -module_param(gts, uint, 0644);
> -module_param(bfs, uint, 0644);
> -MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
> -MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
> -
> -static u8 wake_sleep_flags(void)
> +static int set_param_wake_flag(const char *val, struct kernel_param *kp)
>  {
> -	u8 flags = ACPI_NO_OPTIONAL_METHODS;
> +	int ret = param_set_int(val, kp);
>  
> -	if (gts)
> -		flags |= ACPI_EXECUTE_GTS;
> -	if (bfs)
> -		flags |= ACPI_EXECUTE_BFS;
> +	if (ret)
> +		return ret;
>  
> -	return flags;
> +	if (val == (const char *)&gts) {
> +		if (gts)
> +			wake_sleep_flags |= ACPI_EXECUTE_GTS;
> +		else
> +			wake_sleep_flags &= ~ACPI_EXECUTE_GTS;
> +	}
> +	if (val == (const char *)&bfs) {
> +		if (bfs)
> +			wake_sleep_flags |= ACPI_EXECUTE_BFS;
> +		else
> +			wake_sleep_flags &= ~ACPI_EXECUTE_BFS;
> +	}
> +	return ret;
>  }
> +module_param_call(gts, set_param_wake_flag, param_get_int, &gts, 0644);
> +module_param_call(bfs, set_param_wake_flag, param_get_int, &bfs, 0644);
> +MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
> +MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
>  
>  static u8 sleep_states[ACPI_S_STATE_COUNT];
>  
> @@ -263,7 +273,6 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
>  {
>  	acpi_status status = AE_OK;
>  	u32 acpi_state = acpi_target_sleep_state;
> -	u8 flags = wake_sleep_flags();
>  	int error;
>  
>  	ACPI_FLUSH_CPU_CACHE();
> @@ -271,7 +280,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
>  	switch (acpi_state) {
>  	case ACPI_STATE_S1:
>  		barrier();
> -		status = acpi_enter_sleep_state(acpi_state, flags);
> +		status = acpi_enter_sleep_state(acpi_state, wake_sleep_flags);
>  		break;
>  
>  	case ACPI_STATE_S3:
> @@ -288,7 +297,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
>  	acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
>  
>  	/* Reprogram control registers and execute _BFS */
> -	acpi_leave_sleep_state_prep(acpi_state, flags);
> +	acpi_leave_sleep_state_prep(acpi_state, wake_sleep_flags);
>  
>  	/* ACPI 3.0 specs (P62) says that it's the responsibility
>  	 * of the OSPM to clear the status bit [ implying that the
> @@ -552,30 +561,27 @@ static int acpi_hibernation_begin(void)
>  
>  static int acpi_hibernation_enter(void)
>  {
> -	u8 flags = wake_sleep_flags();
>  	acpi_status status = AE_OK;
>  
>  	ACPI_FLUSH_CPU_CACHE();
>  
>  	/* This shouldn't return.  If it returns, we have a problem */
> -	status = acpi_enter_sleep_state(ACPI_STATE_S4, flags);
> +	status = acpi_enter_sleep_state(ACPI_STATE_S4, wake_sleep_flags);
>  	/* Reprogram control registers and execute _BFS */
> -	acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags);
> +	acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags);
>  
>  	return ACPI_SUCCESS(status) ? 0 : -EFAULT;
>  }
>  
>  static void acpi_hibernation_leave(void)
>  {
> -	u8 flags = wake_sleep_flags();
> -
>  	/*
>  	 * If ACPI is not enabled by the BIOS and the boot kernel, we need to
>  	 * enable it here.
>  	 */
>  	acpi_enable();
>  	/* Reprogram control registers and execute _BFS */
> -	acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags);
> +	acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags);
>  	/* Check the hardware signature */
>  	if (facs && s4_hardware_signature != facs->hardware_signature) {
>  		printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
> @@ -830,12 +836,10 @@ static void acpi_power_off_prepare(void)
>  
>  static void acpi_power_off(void)
>  {
> -	u8 flags = wake_sleep_flags();
> -
>  	/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
>  	printk(KERN_DEBUG "%s called\n", __func__);
>  	local_irq_disable();
> -	acpi_enter_sleep_state(ACPI_STATE_S5, flags);
> +	acpi_enter_sleep_state(ACPI_STATE_S5, wake_sleep_flags);
>  }
>  
>  /*


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/