Re: [PATCH v4 2/3] serial/8250_pci: Clear FIFOs for Intel ME SerialOver Lan device on BI

From: Dan Williams
Date: Wed Apr 18 2012 - 18:36:40 EST


On Wed, Apr 18, 2012 at 3:12 PM, Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> On Tue, Apr 10, 2012 at 02:10:58PM -0700, Dan Williams wrote:
>> From: Sudhakar Mamillapalli <sudhakar@xxxxxx>
>>
>> When using Serial Over Lan (SOL) over the virtual serial port in a Intel
>> management engine (ME) device, on device reset the serial FIFOs need to
>> be cleared to keep the FIFO indexes in-sync between the host and the
>> engine.
>>
>> On a reset the serial device assertes BI, so using that as a cue FIFOs
>> are cleared.  So for this purpose a new handle_break callback has been
>> added.  One other problem is that the serial registers might temporarily
>> go to 0 on reset of this device.  So instead of using the IER register
>> read, if 0 returned use the ier value in uart_8250_port. This is hidden
>> under a custom serial_in.
>>
>> Cc: Nhan H Mai <nhan.h.mai@xxxxxxxxx>
>> Signed-off-by: Sudhakar Mamillapalli <sudhakar@xxxxxx>
>> Acked-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
>> Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
>
> What tree did you make this against?
>
> It fails with:
> patching file drivers/tty/serial/8250/8250.c
> patching file drivers/tty/serial/8250/8250.h
> patching file drivers/tty/serial/8250/8250_pci.c
> Hunk #2 FAILED at 1093.
> 1 out of 2 hunks FAILED -- saving rejects to file drivers/tty/serial/8250/8250_pci.c.rej
>
> While that file hasn't been changed since it was moved to that location.
>
> Any ideas?

Hmm, I think this is because this patch depends on the reverts went
into 3.4 via tty-linus.

On my internal tree I have the following against 3.4-rc2

48013c6 Revert "serial/8250_pci: init-quirk msi support for kt serial
controller"
0f4149f Revert "serial/8250_pci: setup-quirk workaround for the kt
serial controller"
5580b22 serial/8250_pci: add a "force background timer" flag and use
it for the "kt" serial port
d8a8351 tegra, serial8250: add ->handle_break() uart_port op
1d9aafe serial/8250_pci: Clear FIFOs for Intel ME Serial Over Lan device on BI
d4cb218 serial/8250_pci: fix suspend/resume vs init/exit quirks

> Because of this, I've only applied your first patch in this series, not
> the last two.

Not sure how these things are handled in tty.git, backmerge?

--
Dan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/