[PATCH] ARM: cache-l2x0.c: save aux ctrl for resume in case that l2x0 is enabled before init

From: Yilu Mao
Date: Mon Apr 23 2012 - 22:50:14 EST


If l2x0 controller has been enabled when calling l2x0_init, the aux ctrl
register will not be saved in l2x0_saved_regs. Therefore we can not use
l2x0_saved_regs.aux_ctrl for resume later. This patch fixed the problem
by saving aux ctrl in l2x0_saved_regs just after it's being read from
the register.

Signed-off-by: Yilu Mao <ylmao@xxxxxxxxxxx>
---
arch/arm/mm/cache-l2x0.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index a53fd2a..3034b06 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -320,6 +320,12 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);

+ /* In case l2x controller is enabled, the aux ctrl register
+ * can't be set. So the original value should be stored in
+ * the l2x0_saved_regs for restoring when resume.
+ */
+ l2x0_saved_regs.aux_ctrl = aux;
+
aux &= aux_mask;
aux |= aux_val;

--
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/