[PATCH v3 4/4] MFD: twl6040: Add support for Device Tree
From: Peter Ujfalusi
Date: Wed May 16 2012 - 07:18:56 EST
Device tree based probing support for the core twl6040 driver. Child
devices will be created as MFD devices:
- ASoC codec is always created
- Vibra child is only created if the vibra section present in the DT blob.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
---
Documentation/devicetree/bindings/mfd/twl6040.txt | 62 +++++++++++++++++++++
drivers/mfd/twl6040-core.c | 27 ++++++---
drivers/mfd/twl6040-irq.c | 6 ++
3 files changed, 87 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/twl6040.txt
diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt
new file mode 100644
index 0000000..bc67c6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl6040.txt
@@ -0,0 +1,62 @@
+Texas Instruments TWL6040 family
+
+The TWL6040s are 8-channel high quality low-power audio codecs providing audio
+and vibra functionality on OMAP4+ platforms.
+They are connected ot the host processor via i2c for commands, McPDM for audio
+data and commands.
+
+Required properties:
+- compatible : Must be "ti,twl6040";
+- reg: must be 0x4b for i2c address
+- interrupts: twl6040 has one interrupt line connecteded to the main SoC
+- interrupt-parent: The parent interrupt controller
+- twl6040,audpwron-gpio: Power on GPIO line for the twl6040
+
+- vio-supply: Regulator for the twl6040 VIO supply
+- v2v1-supply: Regulator for the twl6040 V2V1 supply
+
+Optional properties, nodes:
+- enable-active-high: To power on the twl6040 during boot.
+
+Vibra functionality
+Required properties:
+- vddvibl-supply: Regulator for the left vibra motor
+- vddvibr-supply: Regulator for the right vibra motor
+- vibra { }: Configuration section for vibra parameters containing the following
+ properties:
+- ti,vibldrv-res: Resistance parameter for left driver
+- ti,vibrdrv-res: Resistance parameter for right driver
+- ti,viblmotor-res: Resistance parameter for left motor
+- ti,viblmotor-res: Resistance parameter for right motor
+
+Optional properties within vibra { } section:
+- vddvibl_uV: If the vddvibl default voltage need to be changed
+- vddvibr_uV: If the vddvibr default voltage need to be changed
+
+Example:
+&i2c1 {
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ reg = <0x4b>;
+
+ interrupts = <0 119 4>;
+ interrupt-parent = <&gic>;
+ twl6040,audpwron-gpio = <&gpio4 31 0>;
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+
+ /* regulators for vibra motor */
+ vddvibl-supply = <&vbat>;
+ vddvibr-supply = <&vbat>;
+
+ vibra {
+ /* Vibra driver, motor resistance parameters */
+ ti,vibldrv-res = <8>;
+ ti,vibrdrv-res = <3>;
+ ti,viblmotor-res = <10>;
+ ti,vibrmotor-res = <10>;
+ };
+ };
+};
diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index 9765dc2..450a28f 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -29,6 +29,10 @@
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/i2c.h>
@@ -505,11 +509,12 @@ static int __devinit twl6040_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct twl6040_platform_data *pdata = client->dev.platform_data;
+ struct device_node *node = client->dev.of_node;
struct twl6040 *twl6040;
struct mfd_cell *cell = NULL;
int irq, ret, children = 0;
- if (!pdata) {
+ if (!pdata && !node) {
dev_err(&client->dev, "Platform data is missing\n");
return -EINVAL;
}
@@ -560,9 +565,13 @@ static int __devinit twl6040_probe(struct i2c_client *client,
twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
/* ERRATA: Automatic power-up is not possible in ES1.0 */
- if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
- twl6040->audpwron = pdata->audpwron_gpio;
- else
+ if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0) {
+ if (pdata)
+ twl6040->audpwron = pdata->audpwron_gpio;
+ else
+ twl6040->audpwron = of_get_named_gpio(node,
+ "ti,audpwron-gpio", 0);
+ } else
twl6040->audpwron = -EINVAL;
if (gpio_is_valid(twl6040->audpwron)) {
@@ -602,13 +611,13 @@ static int __devinit twl6040_probe(struct i2c_client *client,
twl6040_codec_rsrc[0].end = irq;
cell->resources = twl6040_codec_rsrc;
cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc);
- if (pdata->codec) {
+ if (pdata && pdata->codec) {
cell->platform_data = pdata->codec;
cell->pdata_size = sizeof(*pdata->codec);
}
children++;
- if (pdata->vibra) {
+ if ((pdata && pdata->vibra) || of_find_node_by_name(node, "vibra")) {
irq = twl6040->irq_base + TWL6040_IRQ_VIB;
cell = &twl6040->cells[children];
@@ -618,8 +627,10 @@ static int __devinit twl6040_probe(struct i2c_client *client,
cell->resources = twl6040_vibra_rsrc;
cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc);
- cell->platform_data = pdata->vibra;
- cell->pdata_size = sizeof(*pdata->vibra);
+ if (pdata && pdata->vibra) {
+ cell->platform_data = pdata->vibra;
+ cell->pdata_size = sizeof(*pdata->vibra);
+ }
children++;
}
diff --git a/drivers/mfd/twl6040-irq.c b/drivers/mfd/twl6040-irq.c
index 914978e..4b42543 100644
--- a/drivers/mfd/twl6040-irq.c
+++ b/drivers/mfd/twl6040-irq.c
@@ -25,6 +25,8 @@
#include <linux/module.h>
#include <linux/err.h>
#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
#include <linux/interrupt.h>
#include <linux/mfd/core.h>
#include <linux/mfd/twl6040.h>
@@ -139,6 +141,7 @@ static irqreturn_t twl6040_irq_thread(int irq, void *data)
int twl6040_irq_init(struct twl6040 *twl6040)
{
+ struct device_node *node = twl6040->dev->of_node;
int i, nr_irqs, irq_base, ret;
u8 val;
@@ -158,6 +161,9 @@ int twl6040_irq_init(struct twl6040 *twl6040)
}
twl6040->irq_base = irq_base;
+ irq_domain_add_legacy(node, ARRAY_SIZE(twl6040_irqs), irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+
/* Register them with genirq */
for (i = irq_base; i < irq_base + nr_irqs; i++) {
irq_set_chip_data(i, twl6040);
--
1.7.8.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/