[PATCH] mtd: nandsim: don't open code a do_div helper

From: Herton Ronaldo Krzesinski
Date: Wed May 16 2012 - 15:22:17 EST


We don't need to open code the divide function, just use div_u64 that
already exists and do the same job. While this is a straightforward
clean up, there is more to that, the real motivation for this.

While building on a cross compiling environment in armel, using gcc
4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5), I was getting the following build
error:

ERROR: "__aeabi_uldivmod" [drivers/mtd/nand/nandsim.ko] undefined!

After investigating with objdump and hand built assembly version
generated with the compiler, I narrowed __aeabi_uldivmod as being
generated from the divide function. When nandsim.c is built with
-fno-inline-functions-called-once, that happens when
CONFIG_DEBUG_SECTION_MISMATCH is enabled, the do_div optimization in
arch/arm/include/asm/div64.h doesn't work as expected with the open
coded divide function: even if the do_div we are using doesn't have a
constant divisor, the compiler still includes the else parts of the
optimized do_div macro, and translates the divisions there to use
__aeabi_uldivmod, instead of only calling __do_div_asm -> __do_div64 and
optimizing/removing everything else out.

So to reproduce, gcc 4.6 plus CONFIG_DEBUG_SECTION_MISMATCH=y and
CONFIG_MTD_NAND_NANDSIM=m should do it, building on armel.

After this change, the compiler does the intended thing even with
-fno-inline-functions-called-once, and optimizes out as expected the
constant handling in the optimized do_div on arm. As this also avoids a
build issue, I'm marking for Stable, as I think is applicable for this
case.

Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@xxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
drivers/mtd/nand/nandsim.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)

For more insight on the build issue, I'm attaching with this also:

* the pre-processed source with gcc -E

* the generated asm with gcc -S (nandsim.s-fno-inline-functions-called-once.txt.gz):
gcc -Wp,-MD,drivers/mtd/nand/.nandsim.o.d -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.6/include -I/home/herton/build/linux-stable/arch/arm/include -Iarch/arm/include/generated -Iinclude -I/home/herton/build/linux-stable/include -include /home/herton/build/linux-stable/include/linux/kconfig.h -I/home/herton/build/linux-stable/drivers/mtd/nand -Idrivers/mtd/nand -D__KERNEL__ -mlittle-endian -I/home/herton/build/linux-stable/arch/arm/mach-omap2/include -I/home/herton/build/linux-stable/arch/arm/plat-omap/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -marm -fno-dwarf2-cfi-asm -fstack-protector -mabi=aapcs-linux -mno-thumb-interwork -funwind-tables -D__LINUX_ARM_ARCH__=7 -march=armv7-a -msoft-float -Uarm -Wframe-larger-than=1024 -Wno-unused-but-set-variable -fomit-frame-pointer -g -fno-inline-functions-called-once -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -DCC_HAVE_ASM_GOTO -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nandsim)" -D"KBUILD_MODNAME=KBUILD_STR(nandsim)" -S /home/herton/build/linux-stable/drivers/mtd/nand/nandsim.c

* generated asm, same as above but removing -fno-inline-functions-called-once
(nandsim.s-without-fno-inline-functions-called-once.txt.gz)

gcc -v output:
Using built-in specs.
COLLECT_GCC=/usr/bin/gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/arm-linux-gnueabi/4.6/lto-wrapper
Target: arm-linux-gnueabi
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.6.3-1ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.6/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.6 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.6 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --enable-objc-gc --enable-multilib --disable-sjlj-exceptions --with-arch=armv7-a --with-float=softfp --with-fpu=vfpv3-d16 --with-mode=thumb --disable-werror --enable-checking=release --build=arm-linux-gnueabi --host=arm-linux-gnueabi --target=arm-linux-gnueabi
Thread model: posix
gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5)

Note that with the nandsim.s with -fno-inline-functions-called-once, a
divide.part.5 function is generated with code matching to the case on
do_div where the divisor is a constant, but divide.part.5 isn't used
anywhere as expected, gcc doesn't remove/optimize it out so later
linking fails.

Personally I think the optimized do_div on arch/arm/include/asm/div64.h
for gcc > 4 is too fragile, relying on gcc behaviour... other way I
could avoid the build issue, keeping the divide function as is (without
this patch), would be to add another bogus do_div with a constant
divisor to the divide function).

diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 261f478..c606b6a 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -28,7 +28,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/string.h>
@@ -547,12 +547,6 @@ static char *get_partition_name(int i)
return kstrdup(buf, GFP_KERNEL);
}

-static uint64_t divide(uint64_t n, uint32_t d)
-{
- do_div(n, d);
- return n;
-}
-
/*
* Initialize the nandsim structure.
*
@@ -581,7 +575,7 @@ static int init_nandsim(struct mtd_info *mtd)
ns->geom.oobsz = mtd->oobsize;
ns->geom.secsz = mtd->erasesize;
ns->geom.pgszoob = ns->geom.pgsz + ns->geom.oobsz;
- ns->geom.pgnum = divide(ns->geom.totsz, ns->geom.pgsz);
+ ns->geom.pgnum = div_u64(ns->geom.totsz, ns->geom.pgsz);
ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz;
ns->geom.secshift = ffs(ns->geom.secsz) - 1;
ns->geom.pgshift = chip->page_shift;
@@ -924,7 +918,7 @@ static int setup_wear_reporting(struct mtd_info *mtd)

if (!rptwear)
return 0;
- wear_eb_count = divide(mtd->size, mtd->erasesize);
+ wear_eb_count = div_u64(mtd->size, mtd->erasesize);
mem = wear_eb_count * sizeof(unsigned long);
if (mem / sizeof(unsigned long) != wear_eb_count) {
NS_ERR("Too many erase blocks for wear reporting\n");
--
1.7.9.5

Attachment: nandsim.E.gz
Description: Binary data

Attachment: nandsim.s-fno-inline-functions-called-once.txt.gz
Description: Binary data

Attachment: nandsim.s-without-fno-inline-functions-called-once.txt.gz
Description: Binary data