[PATCH EDAC v26 30/66] sb_edac: convert driver to use the new edac ABI

From: Mauro Carvalho Chehab
Date: Fri May 18 2012 - 12:40:45 EST


The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.

Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
---
drivers/edac/sb_edac.c | 159 +++++++++++++++++-------------------------------
1 files changed, 56 insertions(+), 103 deletions(-)

diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index 2ce9bf5..8286479 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -314,8 +314,6 @@ struct sbridge_pvt {
struct sbridge_info info;
struct sbridge_channel channel[NUM_CHANNELS];

- int csrow_map[NUM_CHANNELS][MAX_DIMMS];
-
/* Memory type detection */
bool is_mirrored, is_lockstep, is_close_pg;

@@ -487,29 +485,14 @@ static struct pci_dev *get_pdev_slot_func(u8 bus, unsigned slot,
}

/**
- * sbridge_get_active_channels() - gets the number of channels and csrows
+ * check_if_ecc_is_active() - Checks if ECC is active
* bus: Device bus
- * @channels: Number of channels that will be returned
- * @csrows: Number of csrows found
- *
- * Since EDAC core needs to know in advance the number of available channels
- * and csrows, in order to allocate memory for csrows/channels, it is needed
- * to run two similar steps. At the first step, implemented on this function,
- * it checks the number of csrows/channels present at one socket, identified
- * by the associated PCI bus.
- * this is used in order to properly allocate the size of mci components.
- * Note: one csrow is one dimm.
*/
-static int sbridge_get_active_channels(const u8 bus, unsigned *channels,
- unsigned *csrows)
+static int check_if_ecc_is_active(const u8 bus)
{
struct pci_dev *pdev = NULL;
- int i, j;
u32 mcmtr;

- *channels = 0;
- *csrows = 0;
-
pdev = get_pdev_slot_func(bus, 15, 0);
if (!pdev) {
sbridge_printk(KERN_ERR, "Couldn't find PCI device "
@@ -523,41 +506,14 @@ static int sbridge_get_active_channels(const u8 bus, unsigned *channels,
sbridge_printk(KERN_ERR, "ECC is disabled. Aborting\n");
return -ENODEV;
}
-
- for (i = 0; i < NUM_CHANNELS; i++) {
- u32 mtr;
-
- /* Device 15 functions 2 - 5 */
- pdev = get_pdev_slot_func(bus, 15, 2 + i);
- if (!pdev) {
- sbridge_printk(KERN_ERR, "Couldn't find PCI device "
- "%2x.%02d.%d!!!\n",
- bus, 15, 2 + i);
- return -ENODEV;
- }
- (*channels)++;
-
- for (j = 0; j < ARRAY_SIZE(mtr_regs); j++) {
- pci_read_config_dword(pdev, mtr_regs[j], &mtr);
- debugf1("Bus#%02x channel #%d MTR%d = %x\n", bus, i, j, mtr);
- if (IS_DIMM_PRESENT(mtr))
- (*csrows)++;
- }
- }
-
- debugf0("Number of active channels: %d, number of active dimms: %d\n",
- *channels, *csrows);
-
return 0;
}

static int get_dimm_config(struct mem_ctl_info *mci)
{
struct sbridge_pvt *pvt = mci->pvt_info;
- struct csrow_info *csr;
+ struct dimm_info *dimm;
int i, j, banks, ranks, rows, cols, size, npages;
- int csrow = 0;
- unsigned long last_page = 0;
u32 reg;
enum edac_type mode;
enum mem_type mtype;
@@ -616,7 +572,8 @@ static int get_dimm_config(struct mem_ctl_info *mci)
u32 mtr;

for (j = 0; j < ARRAY_SIZE(mtr_regs); j++) {
- struct dimm_info *dimm = &mci->dimms[j];
+ dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers,
+ i, j, 0);
pci_read_config_dword(pvt->pci_tad[i],
mtr_regs[j], &mtr);
debugf4("Channel #%d MTR%d = %x\n", i, j, mtr);
@@ -636,16 +593,6 @@ static int get_dimm_config(struct mem_ctl_info *mci)
size, npages,
banks, ranks, rows, cols);

- /*
- * Fake stuff. This controller doesn't see
- * csrows.
- */
- csr = &mci->csrows[csrow];
- pvt->csrow_map[i][j] = csrow;
- last_page += npages;
- csrow++;
-
- csr->channels[0].dimm = dimm;
dimm->nr_pages = npages;
dimm->grain = 32;
dimm->dtype = (banks == 8) ? DEV_X8 : DEV_X4;
@@ -841,11 +788,10 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
u8 *socket,
long *channel_mask,
u8 *rank,
- char *area_type)
+ char *area_type, char *msg)
{
struct mem_ctl_info *new_mci;
struct sbridge_pvt *pvt = mci->pvt_info;
- char msg[256];
int n_rir, n_sads, n_tads, sad_way, sck_xch;
int sad_interl, idx, base_ch;
int interleave_mode;
@@ -867,12 +813,10 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
*/
if ((addr > (u64) pvt->tolm) && (addr < (1LL << 32))) {
sprintf(msg, "Error at TOLM area, on addr 0x%08Lx", addr);
- edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
if (addr >= (u64)pvt->tohm) {
sprintf(msg, "Error at MMIOH area, on addr 0x%016Lx", addr);
- edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}

@@ -889,7 +833,6 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
limit = SAD_LIMIT(reg);
if (limit <= prv) {
sprintf(msg, "Can't discover the memory socket");
- edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
if (addr <= limit)
@@ -898,7 +841,6 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
}
if (n_sads == MAX_SAD) {
sprintf(msg, "Can't discover the memory socket");
- edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
area_type = get_dram_attr(reg);
@@ -939,7 +881,6 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
break;
default:
sprintf(msg, "Can't discover socket interleave");
- edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
*socket = sad_interleave[idx];
@@ -954,7 +895,6 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
if (!new_mci) {
sprintf(msg, "Struct for socket #%u wasn't initialized",
*socket);
- edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
mci = new_mci;
@@ -970,7 +910,6 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
limit = TAD_LIMIT(reg);
if (limit <= prv) {
sprintf(msg, "Can't discover the memory channel");
- edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
if (addr <= limit)
@@ -1010,7 +949,6 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
break;
default:
sprintf(msg, "Can't discover the TAD target");
- edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
*channel_mask = 1 << base_ch;
@@ -1024,7 +962,6 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
break;
default:
sprintf(msg, "Invalid mirror set. Can't decode addr");
- edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
} else
@@ -1052,7 +989,6 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
if (offset > addr) {
sprintf(msg, "Can't calculate ch addr: TAD offset 0x%08Lx is too high for addr 0x%08Lx!",
offset, addr);
- edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
addr -= offset;
@@ -1092,7 +1028,6 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
if (n_rir == MAX_RIR_RANGES) {
sprintf(msg, "Can't discover the memory rank for ch addr 0x%08Lx",
ch_addr);
- edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
}
rir_way = RIR_WAY(reg);
@@ -1406,7 +1341,8 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci,
{
struct mem_ctl_info *new_mci;
struct sbridge_pvt *pvt = mci->pvt_info;
- char *type, *optype, *msg, *recoverable_msg;
+ enum hw_event_mc_err_type tp_event;
+ char *type, *optype, msg[256], *recoverable_msg;
bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0);
bool overflow = GET_BITFIELD(m->status, 62, 62);
bool uncorrected_error = GET_BITFIELD(m->status, 61, 61);
@@ -1418,13 +1354,21 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci,
u32 optypenum = GET_BITFIELD(m->status, 4, 6);
long channel_mask, first_channel;
u8 rank, socket;
- int csrow, rc, dimm;
+ int rc, dimm;
char *area_type = "Unknown";

- if (ripv)
- type = "NON_FATAL";
- else
- type = "FATAL";
+ if (uncorrected_error) {
+ if (ripv) {
+ type = "FATAL";
+ tp_event = HW_EVENT_ERR_FATAL;
+ } else {
+ type = "NON_FATAL";
+ tp_event = HW_EVENT_ERR_UNCORRECTED;
+ }
+ } else {
+ type = "CORRECTED";
+ tp_event = HW_EVENT_ERR_CORRECTED;
+ }

/*
* According with Table 15-9 of the Intel Archictecture spec vol 3A,
@@ -1442,19 +1386,19 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci,
} else {
switch (optypenum) {
case 0:
- optype = "generic undef request";
+ optype = "generic undef request error";
break;
case 1:
- optype = "memory read";
+ optype = "memory read error";
break;
case 2:
- optype = "memory write";
+ optype = "memory write error";
break;
case 3:
- optype = "addr/cmd";
+ optype = "addr/cmd error";
break;
case 4:
- optype = "memory scrubbing";
+ optype = "memory scrubbing error";
break;
default:
optype = "reserved";
@@ -1463,13 +1407,13 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci,
}

rc = get_memory_error_data(mci, m->addr, &socket,
- &channel_mask, &rank, area_type);
+ &channel_mask, &rank, area_type, msg);
if (rc < 0)
- return;
+ goto err_parsing;
new_mci = get_mci_for_node_id(socket);
if (!new_mci) {
- edac_mc_handle_ce_no_info(mci, "Error: socket got corrupted!");
- return;
+ strcpy(msg, "Error: socket got corrupted!");
+ goto err_parsing;
}
mci = new_mci;
pvt = mci->pvt_info;
@@ -1483,8 +1427,6 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci,
else
dimm = 2;

- csrow = pvt->csrow_map[first_channel][dimm];
-
if (uncorrected_error && recoverable)
recoverable_msg = " recoverable";
else
@@ -1495,18 +1437,14 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci,
* Probably, we can just discard it, as the channel information
* comes from the get_memory_error_data() address decoding
*/
- msg = kasprintf(GFP_ATOMIC,
- "%d %s error(s): %s on %s area %s%s: cpu=%d Err=%04x:%04x (ch=%d), "
- "addr = 0x%08llx => socket=%d, Channel=%ld(mask=%ld), rank=%d\n",
+ snprintf(msg, sizeof(msg),
+ "%d error(s)%s: %s%s: cpu=%d Err=%04x:%04x addr = 0x%08llx socket=%d Channel=%ld(mask=%ld), rank=%d\n",
core_err_cnt,
+ overflow ? " OVERFLOW" : "",
area_type,
- optype,
- type,
recoverable_msg,
- overflow ? "OVERFLOW" : "",
m->cpu,
mscod, errcode,
- channel, /* 1111b means not specified */
(long long) m->addr,
socket,
first_channel, /* This is the real channel on SB */
@@ -1515,13 +1453,19 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci,

debugf0("%s", msg);

+ /* FIXME: need support for channel mask */
+
/* Call the helper to output message */
- if (uncorrected_error)
- edac_mc_handle_fbd_ue(mci, csrow, 0, 0, msg);
- else
- edac_mc_handle_fbd_ce(mci, csrow, 0, msg);
+ edac_mc_handle_error(tp_event, mci,
+ m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0,
+ channel, dimm, -1,
+ optype, msg, m);
+ return;
+err_parsing:
+ edac_mc_handle_error(tp_event, mci, 0, 0, 0,
+ -1, -1, -1,
+ msg, "", m);

- kfree(msg);
}

/*
@@ -1680,16 +1624,25 @@ static void sbridge_unregister_mci(struct sbridge_dev *sbridge_dev)
static int sbridge_register_mci(struct sbridge_dev *sbridge_dev)
{
struct mem_ctl_info *mci;
+ struct edac_mc_layer layers[2];
struct sbridge_pvt *pvt;
- int rc, channels, csrows;
+ int rc;

/* Check the number of active and not disabled channels */
- rc = sbridge_get_active_channels(sbridge_dev->bus, &channels, &csrows);
+ rc = check_if_ecc_is_active(sbridge_dev->bus);
if (unlikely(rc < 0))
return rc;

/* allocate a new MC control structure */
- mci = edac_mc_alloc(sizeof(*pvt), csrows, channels, sbridge_dev->mc);
+ layers[0].type = EDAC_MC_LAYER_CHANNEL;
+ layers[0].size = NUM_CHANNELS;
+ layers[0].is_virt_csrow = false;
+ layers[1].type = EDAC_MC_LAYER_SLOT;
+ layers[1].size = MAX_DIMMS;
+ layers[1].is_virt_csrow = true;
+ mci = new_edac_mc_alloc(sbridge_dev->mc, ARRAY_SIZE(layers), layers,
+ sizeof(*pvt));
+
if (unlikely(!mci))
return -ENOMEM;

--
1.7.8

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/