Re: [PATCH 2/3] x86: x2apic/cluster: Make use of lowest prioritydelivery mode

From: Ingo Molnar
Date: Mon May 21 2012 - 08:40:28 EST



* Alexander Gordeev <agordeev@xxxxxxxxxx> wrote:

> > So, in theory, prior the patch you should be seeing irqs go
> > to only one CPU, while after the patch they are spread out
> > amongst the CPU. If it's using LowestPrio delivery then we
> > depend on the hardware doing this for us - how does this
> > work out in practice, are the target CPUs round-robin-ed,
> > with a new CPU for every new IRQ delivered?
>
> That is exactly what I can observe.
>
> As of 'target CPUs round-robin-ed' and 'with a new CPU for
> every new IRQ delivered' -- that is something we can not
> control as you noted. Nor do we care to my understanding.
>
> I can not commit on every h/w out there obviously, but on my
> PowerEdge M910 with some half-dozen clusters with six CPU per
> each, the interrupts are perfectly balanced among those ones
> present in IRTEs.

But that is not 'perfectly balanced' in many cases.

When the hardware round-robins the interrupts then each
interrupt will go to a 'cache cold' CPU in essence. This is
pretty much the worst thing possible thing to do in most cases:
while it's "perfectly balanced" in the sense of distributing
cycles evenly between CPUs, each interrupt handler execution
will generate an avalance of cachemisses, for cachelines there
were modified in the previous invocation of the irq.

One notable exception is when the CPUs are SMT/Hyperthreading
siblings, in that case they are sharing even the L1 cache, so
there's very little cost to round-robining the IRQs within the
CPU mask.

But AFAICS irqbalanced will spread irqs on wider masks than SMT
sibling boundaries, exposing us to the above performance
problem.

So I think we need to tread carefully here.

Thanks,

Ingo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/