[PATCH v5 1/7] ARM: imx: Modify IMX_IO_P2V macro

From: Robert Lee
Date: Mon May 21 2012 - 18:51:49 EST


A change is needed in the IMX_IO_P2V macro to allow all imx5 platforms
to use common definitions when accessing registers of peripherals on
the AIPS2 bus. With this change, IMX_IO_P2V(MX50_AIPS2_BASE_ADDR) ==
IMX_IO_P2V(MX51_AIPS2_BASE_ADDR) == IMX_IO_P2V(MX53_AIPS2_BASE_ADDR).

This change was tested for mapping conflicts using the iop2v script
found at git://git.pengutronix.de/git/ukl/imx-iop2v.git and by
performing a bootup of a default build using imx_v6_v7_defconfig
on a imx51 babbage board and imx53 loco board. The comments were
modified to reflect the output given by the script which shows the
virtual address mappings.

Signed-off-by: Robert Lee <rob.lee@xxxxxxxxxx>
---
arch/arm/plat-mxc/include/mach/hardware.h | 25 ++++++++++++++-----------
1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 0630513..071afd0 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -50,7 +50,7 @@
* IO 0x00200000+0x100000 -> 0xf4000000+0x100000
* mx21:
* AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000
- * SAHB1 0x80000000+0x100000 -> 0xf4000000+0x100000
+ * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000
* X_MEMC 0xdf000000+0x004000 -> 0xf5f00000+0x004000
* mx25:
* AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
@@ -58,47 +58,50 @@
* AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
* mx27:
* AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000
- * SAHB1 0x80000000+0x100000 -> 0xf4000000+0x100000
+ * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000
* X_MEMC 0xd8000000+0x100000 -> 0xf5c00000+0x100000
* mx31:
* AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
* AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
* AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
- * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000
+ * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000
* SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* mx35:
* AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
* AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
* AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
- * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000
+ * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000
* SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* mx50:
* TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
- * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
* mx51:
- * TZIC 0xe0000000+0x004000 -> 0xf5000000+0x004000
+ * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
* IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000
+ * DEBUG 0x60000000+0x100000 -> 0xf5000000+0x100000
* SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000
- * AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000
+ * AIPS2 0x83f00000+0x100000 -> 0xf5300000+0x100000
* mx53:
* TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
+ * DEBUG 0x40000000+0x100000 -> 0xf5000000+0x100000
* SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
* AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
* mx6q:
- * SCU 0x00a00000+0x001000 -> 0xf4000000+0x001000
+ * SCU 0x00a00000+0x004000 -> 0xf4000000+0x004000
* CCM 0x020c4000+0x004000 -> 0xf42c4000+0x004000
- * ANATOP 0x020c8000+0x001000 -> 0xf42c8000+0x001000
+ * ANATOP 0x020c8000+0x004000 -> 0xf42c8000+0x004000
* UART4 0x021f0000+0x004000 -> 0xf42f0000+0x004000
*/
#define IMX_IO_P2V(x) ( \
- 0xf4000000 + \
+ (((x) & 0x80000000) >> 7) | \
+ (0xf4000000 + \
(((x) & 0x50000000) >> 6) + \
(((x) & 0x0b000000) >> 4) + \
- (((x) & 0x000fffff)))
+ (((x) & 0x000fffff))))

#define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x))

--
1.7.10

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/