[PATCH 2/3] pinctrl: add exynos4210 specific driver data for samsung pinctrl driver

From: Thomas Abraham
Date: Wed May 23 2012 - 19:52:38 EST


Add information about the Exynos4210 pin banks, SoC specific configuration
callbacks and driver data which is used by the Samsung pinctrl driver.

Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
---
drivers/pinctrl/Kconfig | 7 ++
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-exynos4.c | 211 +++++++++++++++++++++++++++++++++++++
3 files changed, 219 insertions(+), 0 deletions(-)
create mode 100644 drivers/pinctrl/pinctrl-exynos4.c

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index a6198c1..5acb90e 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -131,6 +131,13 @@ config PINCTRL_SAMSUNG
bool "Samsung pinctrl driver"
depends on OF

+config PINCTRL_EXYNOS4
+ bool "Pinctrl driver data for Exynos4 SoC"
+ depends on ARCH_EXYNOS4 && OF
+ depends on PINCTRL_SAMSUNG
+ select PINMUX
+ select PINCONF
+
endmenu

endif
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 35986ed..589498e 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -27,3 +27,4 @@ obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o
obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o
obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o
obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o
+obj-$(CONFIG_PINCTRL_EXYNOS4) += pinctrl-exynos4.o
diff --git a/drivers/pinctrl/pinctrl-exynos4.c b/drivers/pinctrl/pinctrl-exynos4.c
new file mode 100644
index 0000000..ed419b2
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-exynos4.c
@@ -0,0 +1,211 @@
+/*
+ * Exynos4 specific driver data for Samsung pinctrl and gpiolib driver.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2012 Linaro Ltd
+ * http://www.linaro.org
+ *
+ * This file contains the Exynos4 specific driver data for the Samsung
+ * pinctrl/gpiolib interface drivers.
+ *
+ * Author: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/gpio.h>
+
+#include "pinctrl-samsung.h"
+
+#define EXYNOS4_PIN_BANK(offset, __gpio, id) \
+ { \
+ .reg_offset = offset, \
+ .pin_base = (__gpio##_START), \
+ .nr_pins = (__gpio##_NR), \
+ .func_width = 4, \
+ .pud_width = 2, \
+ .drv_width = 2, \
+ .name = id \
+ }
+
+/* pin banks of pin-controller 0 */
+static struct samsung_pin_bank exynos4210_pin_banks0[] = {
+ EXYNOS4_PIN_BANK(0x000, EXYNOS4_GPIO_A0, "gpa0"),
+ EXYNOS4_PIN_BANK(0x020, EXYNOS4_GPIO_A1, "gpa1"),
+ EXYNOS4_PIN_BANK(0x040, EXYNOS4_GPIO_B, "gpb"),
+ EXYNOS4_PIN_BANK(0x060, EXYNOS4_GPIO_C0, "gpc0"),
+ EXYNOS4_PIN_BANK(0x080, EXYNOS4_GPIO_C1, "gpc1"),
+ EXYNOS4_PIN_BANK(0x0A0, EXYNOS4_GPIO_D0, "gpd0"),
+ EXYNOS4_PIN_BANK(0x0C0, EXYNOS4_GPIO_D1, "gpd1"),
+ EXYNOS4_PIN_BANK(0x0E0, EXYNOS4_GPIO_E0, "gpe0"),
+ EXYNOS4_PIN_BANK(0x100, EXYNOS4_GPIO_E1, "gpe1"),
+ EXYNOS4_PIN_BANK(0x120, EXYNOS4_GPIO_E2, "gpe2"),
+ EXYNOS4_PIN_BANK(0x140, EXYNOS4_GPIO_E3, "gpe3"),
+ EXYNOS4_PIN_BANK(0x160, EXYNOS4_GPIO_E4, "gpe4"),
+ EXYNOS4_PIN_BANK(0x180, EXYNOS4_GPIO_F0, "gpf0"),
+ EXYNOS4_PIN_BANK(0x1A0, EXYNOS4_GPIO_F1, "gpf1"),
+ EXYNOS4_PIN_BANK(0x1C0, EXYNOS4_GPIO_F2, "gpf2"),
+ EXYNOS4_PIN_BANK(0x1E0, EXYNOS4_GPIO_F3, "gpf3"),
+};
+
+#define EXYNOS4_PIN_BANK1(offset, __gpio, id) \
+ { \
+ .reg_offset = offset, \
+ .pin_base = (__gpio##_START) - EXYNOS4_GPIO_J0_START,\
+ .nr_pins = (__gpio##_NR), \
+ .func_width = 4, \
+ .pud_width = 2, \
+ .drv_width = 2, \
+ .name = id, \
+ }
+
+/* pin banks of pin-controller 1 */
+static struct samsung_pin_bank exynos4210_pin_banks1[] = {
+ EXYNOS4_PIN_BANK1(0x000, EXYNOS4_GPIO_J0, "gpj0"),
+ EXYNOS4_PIN_BANK1(0x020, EXYNOS4_GPIO_J1, "gpj1"),
+ EXYNOS4_PIN_BANK1(0x040, EXYNOS4_GPIO_K0, "gpk0"),
+ EXYNOS4_PIN_BANK1(0x060, EXYNOS4_GPIO_K1, "gpk1"),
+ EXYNOS4_PIN_BANK1(0x080, EXYNOS4_GPIO_K2, "gpk2"),
+ EXYNOS4_PIN_BANK1(0x0A0, EXYNOS4_GPIO_K3, "gpk3"),
+ EXYNOS4_PIN_BANK1(0x0C0, EXYNOS4_GPIO_L0, "gpl0"),
+ EXYNOS4_PIN_BANK1(0x0E0, EXYNOS4_GPIO_L1, "gpl1"),
+ EXYNOS4_PIN_BANK1(0x100, EXYNOS4_GPIO_L2, "gpl2"),
+ EXYNOS4_PIN_BANK1(0x120, EXYNOS4_GPIO_Y0, "gpy0"),
+ EXYNOS4_PIN_BANK1(0x140, EXYNOS4_GPIO_Y1, "gpy1"),
+ EXYNOS4_PIN_BANK1(0x160, EXYNOS4_GPIO_Y2, "gpy2"),
+ EXYNOS4_PIN_BANK1(0x180, EXYNOS4_GPIO_Y3, "gpy3"),
+ EXYNOS4_PIN_BANK1(0x1A0, EXYNOS4_GPIO_Y4, "gpy4"),
+ EXYNOS4_PIN_BANK1(0x1C0, EXYNOS4_GPIO_Y5, "gpy5"),
+ EXYNOS4_PIN_BANK1(0x1E0, EXYNOS4_GPIO_Y6, "gpy6"),
+ EXYNOS4_PIN_BANK1(0xC00, EXYNOS4_GPIO_X0, "gpx0"),
+ EXYNOS4_PIN_BANK1(0xC20, EXYNOS4_GPIO_X1, "gpx1"),
+ EXYNOS4_PIN_BANK1(0xC40, EXYNOS4_GPIO_X2, "gpx2"),
+ EXYNOS4_PIN_BANK1(0xC60, EXYNOS4_GPIO_X3, "gpx3"),
+};
+
+#define EXYNOS4_PIN_BANK2(offset, __gpio, id) \
+ { \
+ .reg_offset = offset, \
+ .pin_base = (__gpio##_START) - EXYNOS4_GPIO_Z_START,\
+ .nr_pins = (__gpio##_NR), \
+ .func_width = 4, \
+ .pud_width = 2, \
+ .drv_width = 2, \
+ .name = id, \
+ }
+
+/* pin banks of pin-controller 2 */
+static struct samsung_pin_bank exynos4210_pin_banks2[] = {
+ EXYNOS4_PIN_BANK2(0x000, EXYNOS4_GPIO_Z, "gpz"),
+};
+
+/* gpio range instance for pinctrl 0 */
+static struct pinctrl_gpio_range exynos4210_pctrl0_gpio_range = {
+ .name = "exynos4210_gpio_range0",
+ .id = 0,
+};
+
+/* gpio range instance for pinctrl 1 */
+static struct pinctrl_gpio_range exynos4210_pctrl1_gpio_range = {
+ .name = "exynos4210_gpio_range1",
+ .id = 0,
+};
+
+/* gpio range instance for pinctrl 2 */
+static struct pinctrl_gpio_range exynos4210_pctrl2_gpio_range = {
+ .name = "exynos4210_gpio_range2",
+ .id = 0,
+};
+
+/*
+ * Exynos4210 specific callback to translate PUD_xxx values into Exynos4210
+ * specific register values.
+ */
+static int exynos4210_xlate_pud(unsigned int pud)
+{
+ if (pud == PUD_UP)
+ return 3;
+ else
+ return pud;
+}
+
+/*
+ * Exynos4210 specific callback to translate DRV_xxx values into Exynos4210
+ * specific register values.
+ */
+static int exynos4210_xlate_drv(unsigned int drv)
+{
+ switch (drv) {
+ case DRV_3X:
+ return 1;
+ case DRV_2X:
+ return 2;
+ default:
+ return drv;
+ }
+}
+
+/*
+ * Samsung pinctrl driver data for Exynos4210 SoC. Exynos4210 SoC includes
+ * three gpio/pin-mux/pinconfig controllers.
+ */
+struct samsung_pinctrl_drv_data exynos4210_pinctrl_drv_data[] = {
+ {
+ /* pin-controller instance 0 data */
+ .ctrl = &(struct samsung_pin_ctrl) {
+ .grange = &exynos4210_pctrl0_gpio_range,
+ .pin_banks = exynos4210_pin_banks0,
+ .nr_banks = ARRAY_SIZE(exynos4210_pin_banks0),
+ .base = EXYNOS4_GPIO_A0_START,
+ .nr_pins = EXYNOS4_GPIO_J0_START - 1,
+ .xlate_pud = exynos4210_xlate_pud,
+ .xlate_drv = exynos4210_xlate_drv,
+ .label = "exynos4210-gpio-ctrl0",
+ },
+ .pctl = &(struct pinctrl_desc) {
+ .name = "exynos4210_pinctrl",
+ .owner = THIS_MODULE,
+ },
+ }, {
+ /* pin-controller instance 1 data */
+ .ctrl = &(struct samsung_pin_ctrl) {
+ .grange = &exynos4210_pctrl1_gpio_range,
+ .pin_banks = exynos4210_pin_banks1,
+ .nr_banks = ARRAY_SIZE(exynos4210_pin_banks1),
+ .base = EXYNOS4_GPIO_J0_START,
+ .nr_pins = EXYNOS4_GPIO_Z_START -
+ EXYNOS4_GPIO_J0_START,
+ .xlate_pud = exynos4210_xlate_pud,
+ .xlate_drv = exynos4210_xlate_drv,
+ .label = "exynos4210-gpio-ctrl1",
+ },
+ .pctl = &(struct pinctrl_desc) {
+ .name = "exynos4210_pinctrl",
+ .owner = THIS_MODULE,
+ },
+ }, {
+ /* pin-controller instance 2 data */
+ .ctrl = &(struct samsung_pin_ctrl) {
+ .grange = &exynos4210_pctrl2_gpio_range,
+ .pin_banks = exynos4210_pin_banks2,
+ .nr_banks = ARRAY_SIZE(exynos4210_pin_banks2),
+ .base = EXYNOS4_GPIO_Z_START,
+ .nr_pins = EXYNOS4_GPIO_Z_NR,
+ .xlate_pud = exynos4210_xlate_pud,
+ .xlate_drv = exynos4210_xlate_drv,
+ .label = "exynos4210-gpio-ctrl2",
+ },
+ .pctl = &(struct pinctrl_desc) {
+ .name = "exynos4210_pinctrl",
+ .owner = THIS_MODULE,
+ },
+ },
+};
--
1.6.6.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/