[PATCH] ARM: at91: remove two unused headers

From: Paul Bolle
Date: Thu Jun 07 2012 - 06:18:45 EST

Commit 82c583e3ae31ffa76d1280197274cc1e1cde3179 ("AT91RM9200 hardware
headers") introduced arch/arm/mach-at91/include/mach/at91_spi.h and
arch/arm/mach-at91/include/mach/at91_ssc.h. (These files were called
at91rm9200_spi.h and at91rm9200_ssc.h then.) That commit was added in
the v2.6.18 development cycle.

Nothing includes them now and nothing uses the named constants they
provide. (There's no way these named constants could be used unless
these files were included somehow.) It actually seems these two headers
have never been used since they were added to the tree. They can safely
be removed.

Signed-off-by: Paul Bolle <pebolle@xxxxxxxxxx>
---
Tested with "git grep". I do not have the related hardware (whatever
that might be) and don't have the toolchain needed for at91 at hand. But
it's hard to imagine how this could break anything.

arch/arm/mach-at91/include/mach/at91_spi.h | 81 ---------------------
arch/arm/mach-at91/include/mach/at91_ssc.h | 106 ----------------------------
2 files changed, 0 insertions(+), 187 deletions(-)
delete mode 100644 arch/arm/mach-at91/include/mach/at91_spi.h
delete mode 100644 arch/arm/mach-at91/include/mach/at91_ssc.h

diff --git a/arch/arm/mach-at91/include/mach/at91_spi.h b/arch/arm/mach-at91/include/mach/at91_spi.h
deleted file mode 100644
index 2f6ba0c..0000000
--- a/arch/arm/mach-at91/include/mach/at91_spi.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_spi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Serial Peripheral Interface (SPI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SPI_H
-#define AT91_SPI_H
-
-#define AT91_SPI_CR 0x00 /* Control Register */
-#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */
-#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */
-#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */
-#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_MR 0x04 /* Mode Register */
-#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */
-#define AT91_SPI_PS (1 << 1) /* Peripheral Select */
-#define AT91_SPI_PS_FIXED (0 << 1)
-#define AT91_SPI_PS_VARIABLE (1 << 1)
-#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */
-#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */
-#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */
-#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */
-#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
-#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */
-
-#define AT91_SPI_RDR 0x08 /* Receive Data Register */
-#define AT91_SPI_RD (0xffff << 0) /* Receive Data */
-#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
-
-#define AT91_SPI_TDR 0x0c /* Transmit Data Register */
-#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */
-#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
-#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_SR 0x10 /* Status Register */
-#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */
-#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */
-#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */
-#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */
-#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */
-#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */
-#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */
-#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */
-#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */
-#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */
-#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */
-
-#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */
-#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */
-#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */
-
-#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */
-#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */
-#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */
-#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */
-#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */
-#define AT91_SPI_BITS_8 (0 << 4)
-#define AT91_SPI_BITS_9 (1 << 4)
-#define AT91_SPI_BITS_10 (2 << 4)
-#define AT91_SPI_BITS_11 (3 << 4)
-#define AT91_SPI_BITS_12 (4 << 4)
-#define AT91_SPI_BITS_13 (5 << 4)
-#define AT91_SPI_BITS_14 (6 << 4)
-#define AT91_SPI_BITS_15 (7 << 4)
-#define AT91_SPI_BITS_16 (8 << 4)
-#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */
-#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */
-#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_ssc.h b/arch/arm/mach-at91/include/mach/at91_ssc.h
deleted file mode 100644
index a81114c..0000000
--- a/arch/arm/mach-at91/include/mach/at91_ssc.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_ssc.h
- *
- * Copyright (C) SAN People
- *
- * Serial Synchronous Controller (SSC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SSC_H
-#define AT91_SSC_H
-
-#define AT91_SSC_CR 0x00 /* Control Register */
-#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */
-#define AT91_SSC_RXDIS (1 << 1) /* Receive Disable */
-#define AT91_SSC_TXEN (1 << 8) /* Transmit Enable */
-#define AT91_SSC_TXDIS (1 << 9) /* Transmit Disable */
-#define AT91_SSC_SWRST (1 << 15) /* Software Reset */
-
-#define AT91_SSC_CMR 0x04 /* Clock Mode Register */
-#define AT91_SSC_CMR_DIV (0xfff << 0) /* Clock Divider */
-
-#define AT91_SSC_RCMR 0x10 /* Receive Clock Mode Register */
-#define AT91_SSC_CKS (3 << 0) /* Clock Selection */
-#define AT91_SSC_CKS_DIV (0 << 0)
-#define AT91_SSC_CKS_CLOCK (1 << 0)
-#define AT91_SSC_CKS_PIN (2 << 0)
-#define AT91_SSC_CKO (7 << 2) /* Clock Output Mode Selection */
-#define AT91_SSC_CKO_NONE (0 << 2)
-#define AT91_SSC_CKO_CONTINUOUS (1 << 2)
-#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */
-#define AT91_SSC_CKI_FALLING (0 << 5)
-#define AT91_SSC_CK_RISING (1 << 5)
-#define AT91_SSC_CKG (1 << 6) /* Receive Clock Gating Selection [AT91SAM9261 only] */
-#define AT91_SSC_CKG_NONE (0 << 6)
-#define AT91_SSC_CKG_RFLOW (1 << 6)
-#define AT91_SSC_CKG_RFHIGH (2 << 6)
-#define AT91_SSC_START (0xf << 8) /* Start Selection */
-#define AT91_SSC_START_CONTINUOUS (0 << 8)
-#define AT91_SSC_START_TX_RX (1 << 8)
-#define AT91_SSC_START_LOW_RF (2 << 8)
-#define AT91_SSC_START_HIGH_RF (3 << 8)
-#define AT91_SSC_START_FALLING_RF (4 << 8)
-#define AT91_SSC_START_RISING_RF (5 << 8)
-#define AT91_SSC_START_LEVEL_RF (6 << 8)
-#define AT91_SSC_START_EDGE_RF (7 << 8)
-#define AT91_SSC_STOP (1 << 12) /* Receive Stop Selection [AT91SAM9261 only] */
-#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */
-#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */
-
-#define AT91_SSC_RFMR 0x14 /* Receive Frame Mode Register */
-#define AT91_SSC_DATALEN (0x1f << 0) /* Data Length */
-#define AT91_SSC_LOOP (1 << 5) /* Loop Mode */
-#define AT91_SSC_MSBF (1 << 7) /* Most Significant Bit First */
-#define AT91_SSC_DATNB (0xf << 8) /* Data Number per Frame */
-#define AT91_SSC_FSLEN (0xf << 16) /* Frame Sync Length */
-#define AT91_SSC_FSOS (7 << 20) /* Frame Sync Output Selection */
-#define AT91_SSC_FSOS_NONE (0 << 20)
-#define AT91_SSC_FSOS_NEGATIVE (1 << 20)
-#define AT91_SSC_FSOS_POSITIVE (2 << 20)
-#define AT91_SSC_FSOS_LOW (3 << 20)
-#define AT91_SSC_FSOS_HIGH (4 << 20)
-#define AT91_SSC_FSOS_TOGGLE (5 << 20)
-#define AT91_SSC_FSEDGE (1 << 24) /* Frame Sync Edge Detection */
-#define AT91_SSC_FSEDGE_POSITIVE (0 << 24)
-#define AT91_SSC_FSEDGE_NEGATIVE (1 << 24)
-
-#define AT91_SSC_TCMR 0x18 /* Transmit Clock Mode Register */
-#define AT91_SSC_TFMR 0x1c /* Transmit Fram Mode Register */
-#define AT91_SSC_DATDEF (1 << 5) /* Data Default Value */
-#define AT91_SSC_FSDEN (1 << 23) /* Frame Sync Data Enable */
-
-#define AT91_SSC_RHR 0x20 /* Receive Holding Register */
-#define AT91_SSC_THR 0x24 /* Transmit Holding Register */
-#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */
-#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */
-
-#define AT91_SSC_RC0R 0x38 /* Receive Compare 0 Register [AT91SAM9261 only] */
-#define AT91_SSC_RC1R 0x3c /* Receive Compare 1 Register [AT91SAM9261 only] */
-
-#define AT91_SSC_SR 0x40 /* Status Register */
-#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */
-#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */
-#define AT91_SSC_ENDTX (1 << 2) /* End of Transmission */
-#define AT91_SSC_TXBUFE (1 << 3) /* Transmit Buffer Empty */
-#define AT91_SSC_RXRDY (1 << 4) /* Receive Ready */
-#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */
-#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */
-#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */
-#define AT91_SSC_CP0 (1 << 8) /* Compare 0 [AT91SAM9261 only] */
-#define AT91_SSC_CP1 (1 << 9) /* Compare 1 [AT91SAM9261 only] */
-#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */
-#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */
-#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */
-#define AT91_SSC_RXENA (1 << 17) /* Receive Enable */
-
-#define AT91_SSC_IER 0x44 /* Interrupt Enable Register */
-#define AT91_SSC_IDR 0x48 /* Interrupt Disable Register */
-#define AT91_SSC_IMR 0x4c /* Interrupt Mask Register */
-
-#endif
--
1.7.7.6

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/