[PATCH 5/5] regulator: Support AP watchdog reset operation for s5m8767a
From: Sangbeom Kim
Date: Wed Jun 13 2012 - 04:28:48 EST
After AP watchdog reset, S5M8767A should be reset too.
If AP is set on lowest voltage, AP can't execute boot sequence.
This patch support watchdog reset of s5m8767.
Signed-off-by: Sangbeom Kim <sbkim73@xxxxxxxxxxx>
---
drivers/regulator/s5m8767.c | 137 +++++++++++++++++++++++-----------
include/linux/mfd/s5m87xx/s5m-core.h | 5 +
2 files changed, 98 insertions(+), 44 deletions(-)
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 770e4df..533bde6 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -41,6 +41,7 @@ struct s5m8767_info {
u8 buck3_vol[8];
u8 buck4_vol[8];
int buck_gpios[3];
+ int buck_ds[3];
int buck_gpioindex;
};
@@ -283,17 +284,17 @@ static int s5m8767_get_voltage_register(struct regulator_dev *rdev, int *_reg)
reg = S5M8767_REG_BUCK1CTRL2;
break;
case S5M8767_BUCK2:
- reg = S5M8767_REG_BUCK2DVS1;
+ reg = S5M8767_REG_BUCK2DVS2;
if (s5m8767->buck2_gpiodvs)
reg += s5m8767->buck_gpioindex;
break;
case S5M8767_BUCK3:
- reg = S5M8767_REG_BUCK3DVS1;
+ reg = S5M8767_REG_BUCK3DVS2;
if (s5m8767->buck3_gpiodvs)
reg += s5m8767->buck_gpioindex;
break;
case S5M8767_BUCK4:
- reg = S5M8767_REG_BUCK4DVS1;
+ reg = S5M8767_REG_BUCK4DVS2;
if (s5m8767->buck4_gpiodvs)
reg += s5m8767->buck_gpioindex;
break;
@@ -512,7 +513,7 @@ static __devinit int s5m8767_pmic_probe(struct platform_device *pdev)
struct regulator_config config = { };
struct regulator_dev **rdev;
struct s5m8767_info *s5m8767;
- int i, ret, size;
+ int i, ret, size, buck_init;
if (!pdata) {
dev_err(pdev->dev.parent, "Platform data not supplied\n");
@@ -563,12 +564,37 @@ static __devinit int s5m8767_pmic_probe(struct platform_device *pdev)
s5m8767->buck_gpios[0] = pdata->buck_gpios[0];
s5m8767->buck_gpios[1] = pdata->buck_gpios[1];
s5m8767->buck_gpios[2] = pdata->buck_gpios[2];
+ s5m8767->buck_ds[0] = pdata->buck_ds[0];
+ s5m8767->buck_ds[1] = pdata->buck_ds[1];
+ s5m8767->buck_ds[2] = pdata->buck_ds[2];
+
s5m8767->ramp_delay = pdata->buck_ramp_delay;
s5m8767->buck2_ramp = pdata->buck2_ramp_enable;
s5m8767->buck3_ramp = pdata->buck3_ramp_enable;
s5m8767->buck4_ramp = pdata->buck4_ramp_enable;
s5m8767->opmode = pdata->opmode;
+ buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
+ pdata->buck2_init,
+ pdata->buck2_init +
+ buck_voltage_val2.step);
+
+ s5m_reg_write(s5m8767->iodev, S5M8767_REG_BUCK2DVS2, buck_init);
+
+ buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
+ pdata->buck3_init,
+ pdata->buck3_init +
+ buck_voltage_val2.step);
+
+ s5m_reg_write(s5m8767->iodev, S5M8767_REG_BUCK3DVS2, buck_init);
+
+ buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
+ pdata->buck4_init,
+ pdata->buck4_init +
+ buck_voltage_val2.step);
+
+ s5m_reg_write(s5m8767->iodev, S5M8767_REG_BUCK4DVS2, buck_init);
+
for (i = 0; i < 8; i++) {
if (s5m8767->buck2_gpiodvs) {
s5m8767->buck2_vol[i] =
@@ -598,48 +624,71 @@ static __devinit int s5m8767_pmic_probe(struct platform_device *pdev)
}
}
- if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
- pdata->buck4_gpiodvs) {
- if (gpio_is_valid(pdata->buck_gpios[0]) &&
- gpio_is_valid(pdata->buck_gpios[1]) &&
- gpio_is_valid(pdata->buck_gpios[2])) {
- ret = gpio_request(pdata->buck_gpios[0],
- "S5M8767 SET1");
- if (ret == -EBUSY)
- dev_warn(&pdev->dev, "Duplicated gpio request for SET1\n");
-
- ret = gpio_request(pdata->buck_gpios[1],
- "S5M8767 SET2");
- if (ret == -EBUSY)
- dev_warn(&pdev->dev, "Duplicated gpio request for SET2\n");
-
- ret = gpio_request(pdata->buck_gpios[2],
- "S5M8767 SET3");
- if (ret == -EBUSY)
- dev_warn(&pdev->dev, "Duplicated gpio request for SET3\n");
- /* SET1 GPIO */
- gpio_direction_output(pdata->buck_gpios[0],
- (s5m8767->buck_gpioindex >> 2) & 0x1);
- /* SET2 GPIO */
- gpio_direction_output(pdata->buck_gpios[1],
- (s5m8767->buck_gpioindex >> 1) & 0x1);
- /* SET3 GPIO */
- gpio_direction_output(pdata->buck_gpios[2],
- (s5m8767->buck_gpioindex >> 0) & 0x1);
- ret = 0;
- } else {
- dev_err(&pdev->dev, "GPIO NOT VALID\n");
- ret = -EINVAL;
- return ret;
- }
+ if (gpio_is_valid(pdata->buck_gpios[0]) &&
+ gpio_is_valid(pdata->buck_gpios[1]) &&
+ gpio_is_valid(pdata->buck_gpios[2])) {
+ ret = gpio_request(pdata->buck_gpios[0], "S5M8767 SET1");
+ if (ret == -EBUSY)
+ dev_warn(&pdev->dev, "Duplicated gpio request"
+ " for SET1\n");
+
+ ret = gpio_request(pdata->buck_gpios[1], "S5M8767 SET2");
+ if (ret == -EBUSY)
+ dev_warn(&pdev->dev, "Duplicated gpio request"
+ " for SET2\n");
+
+ ret = gpio_request(pdata->buck_gpios[2], "S5M8767 SET3");
+ if (ret == -EBUSY)
+ dev_warn(&pdev->dev, "Duplicated gpio request"
+ " for SET3\n");
+ /* SET1 GPIO */
+ gpio_direction_output(pdata->buck_gpios[0],
+ (s5m8767->buck_gpioindex >> 2) & 0x1);
+ /* SET2 GPIO */
+ gpio_direction_output(pdata->buck_gpios[1],
+ (s5m8767->buck_gpioindex >> 1) & 0x1);
+ /* SET3 GPIO */
+ gpio_direction_output(pdata->buck_gpios[2],
+ (s5m8767->buck_gpioindex >> 0) & 0x1);
+ ret = 0;
+
+ } else {
+ dev_err(&pdev->dev, "GPIO NOT VALID\n");
+ ret = -EINVAL;
+ return ret;
}
- s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK2CTRL,
- (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1), 1 << 1);
- s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK3CTRL,
- (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1), 1 << 1);
- s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK4CTRL,
- (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1), 1 << 1);
+ ret = gpio_request(pdata->buck_ds[0], "S5M8767 DS2");
+ if (ret == -EBUSY)
+ dev_warn(&pdev->dev, "Duplicated gpio request for DS2\n");
+
+ ret = gpio_request(pdata->buck_ds[1], "S5M8767 DS3");
+ if (ret == -EBUSY)
+ dev_warn(&pdev->dev, "Duplicated gpio request for DS3\n");
+
+ ret = gpio_request(pdata->buck_ds[2], "S5M8767 DS4");
+ if (ret == -EBUSY)
+ dev_warn(&pdev->dev, "Duplicated gpio request for DS4\n");
+
+ /* DS2 GPIO */
+ gpio_direction_output(pdata->buck_ds[0], 0x0);
+ /* DS3 GPIO */
+ gpio_direction_output(pdata->buck_ds[1], 0x0);
+ /* DS4 GPIO */
+ gpio_direction_output(pdata->buck_ds[2], 0x0);
+
+ if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
+ pdata->buck4_gpiodvs) {
+ s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK2CTRL,
+ (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1),
+ 1 << 1);
+ s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK3CTRL,
+ (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1),
+ 1 << 1);
+ s5m_reg_update(s5m8767->iodev, S5M8767_REG_BUCK4CTRL,
+ (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1),
+ 1 << 1);
+ }
/* Initialize GPIO DVS registers */
for (i = 0; i < 8; i++) {
diff --git a/include/linux/mfd/s5m87xx/s5m-core.h b/include/linux/mfd/s5m87xx/s5m-core.h
index 21603b4..0b2e0ed 100644
--- a/include/linux/mfd/s5m87xx/s5m-core.h
+++ b/include/linux/mfd/s5m87xx/s5m-core.h
@@ -347,6 +347,7 @@ struct s5m_platform_data {
bool buck_voltage_lock;
int buck_gpios[3];
+ int buck_ds[3];
int buck2_voltage[8];
bool buck2_gpiodvs;
int buck3_voltage[8];
@@ -369,6 +370,10 @@ struct s5m_platform_data {
bool buck2_ramp_enable;
bool buck3_ramp_enable;
bool buck4_ramp_enable;
+
+ int buck2_init;
+ int buck3_init;
+ int buck4_init;
};
#endif /* __LINUX_MFD_S5M_CORE_H */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/