Re: [PATCH 1/2] char/tpm: Add new driver for Infineon I2C TIS TPM

[Andi]

looks good

Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxx>

On 6/12/12, Peter Huewe <peter.huewe@xxxxxxxxxxxx> wrote:
> This patch adds a driver to support Infineon's SLB 9635 TT 1.2 Soft I2C
> TPMs
> which follow the TGC TIS 1.2 TPM specification[1] and Infineon's I2C
> Protocol
> Stack Specification 0.20.
> The I2C Protocol Stack Specification is a simple adaption of the LPC TIS
> Protocol to the I2C Bus.
> The I2C TPMs can be used when LPC Bus is not available (i.e. non x86
> architectures like ARM).
>
> The driver is based on the tpm_tis.c driver by Leendert van Dorn and Kyleen
> Hall and has quite similar functionality.
>
> Tested on Nvidia ARM Tegra2 Development Platform and Beagleboard (ARM OMAP)
> Tested with the Trousers[2] TSS API Testsuite v 0.3 [3]
> Compile-tested on x86 (32/64-bit)
>
> Updates since version 2.1.3:
> - use proper probing mechanism
> * either add the tpm using I2C_BOARD_INFO to your board file or probe it
> * during runtime e.g on BeagleBoard using :
> * "echo tpm_i2c_infineon 0x20 > /sys/bus/i2c/devices/i2c-2/new_device"
> - fix possible endless loop if hardware misbehaves
> - improved return codes
> - consistent spelling i2c/tpm -> I2C/TPM
> - remove hardcoded sleep values and msleep usage
> - removed debug statements
> - added check for I2C functionality
> - renaming to tpm_i2c_infineon
>
> Updates since version 2.1.2:
> - added sysfs entries for duration and timeouts
> - updated to new tpm_do_selftest
>
> Updates since version 2.1.0:
> - improved error handling
> - implemented workarounds needed by the tpm
> - fixed typos
>
> References:
> [1]
> http://www.trustedcomputinggroup.org/resources/pc_client_work_group_pc_client_
> specific_tpm_interface_specification_tis_version_12/
> [2] http://trousers.sourceforge.net/
> [3]
> http://sourceforge.net/projects/trousers/files/TSS%20API%20test%20suite/0.3/
>
> Signed-off-by: Peter Huewe <peter.huewe@xxxxxxxxxxxx>
> ---
>  drivers/char/tpm/Kconfig            |   11 +
>  drivers/char/tpm/Makefile           |    1 +
>  drivers/char/tpm/tpm_i2c_infineon.c |  711
> +++++++++++++++++++++++++++++++++++
>  3 files changed, 723 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/char/tpm/tpm_i2c_infineon.c
>
> diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
> index a048199..c4aac48 100644
> --- a/drivers/char/tpm/Kconfig
> +++ b/drivers/char/tpm/Kconfig
> @@ -33,6 +33,17 @@ config TCG_TIS
>  	  from within Linux.  To compile this driver as a module, choose
>  	  M here; the module will be called tpm_tis.
>
> +config TCG_TIS_I2C_INFINEON
> +	tristate "TPM Interface Specification 1.2 Interface (I2C - Infineon)"
> +	depends on I2C
> +	---help---
> +	  If you have a TPM security chip that is compliant with the
> +	  TCG TIS 1.2 TPM specification and Infineon's I2C Protocol Stack
> +	  Specification 0.20 say Yes and it will be accessible from within
> +	  Linux.
> +	  To compile this driver as a module, choose M here; the module
> +	  will be called tpm_tis_i2c_infineon.
> +
>  config TCG_NSC
>  	tristate "National Semiconductor TPM Interface"
>  	depends on X86
> diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
> index ea3a1e0..a9c3afc 100644
> --- a/drivers/char/tpm/Makefile
> +++ b/drivers/char/tpm/Makefile
> @@ -6,6 +6,7 @@ ifdef CONFIG_ACPI
>  	obj-$(CONFIG_TCG_TPM) += tpm_bios.o
>  endif
>  obj-$(CONFIG_TCG_TIS) += tpm_tis.o
> +obj-$(CONFIG_TCG_TIS_I2C_INFINEON) += tpm_i2c_infineon.o
>  obj-$(CONFIG_TCG_NSC) += tpm_nsc.o
>  obj-$(CONFIG_TCG_ATMEL) += tpm_atmel.o
>  obj-$(CONFIG_TCG_INFINEON) += tpm_infineon.o
> diff --git a/drivers/char/tpm/tpm_i2c_infineon.c
> b/drivers/char/tpm/tpm_i2c_infineon.c
> new file mode 100644
> index 0000000..54b9a5e
> --- /dev/null
> +++ b/drivers/char/tpm/tpm_i2c_infineon.c
> @@ -0,0 +1,711 @@
> +/*
> + * Copyright (C) 2012 Infineon Technologies
> + *
> + * Authors:
> + * Peter Huewe <peter.huewe@xxxxxxxxxxxx>
> + *
> + * Device driver for TCG/TCPA TPM (trusted platform module).
> + * Specifications at www.trustedcomputinggroup.org
> + *
> + * This device driver implements the TPM interface as defined in
> + * the TCG TPM Interface Spec version 1.2, revision 1.0 and the
> + * Infineon I2C Protocol Stack Specification v0.20.
> + *
> + * It is based on the original tpm_tis device driver from Leendert van
> + * Dorn and Kyleen Hall.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation, version 2 of the
> + * License.
> + *
> + *
> + */
> +#include <linux/init.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/wait.h>
> +#include "tpm.h"
> +
> +/* max. buffer size supported by our TPM */
> +#define TPM_BUFSIZE 1260
> +
> +/* max. number of iterations after I2C NAK */
> +#define MAX_COUNT 3
> +
> +#define SLEEP_DURATION_LOW 55
> +#define SLEEP_DURATION_HI 65
> +
> +/* max. number of iterations after I2C NAK for 'long' commands
> + * we need this especially for sending TPM_READY, since the cleanup after
> the
> + * transtion to the ready state may take some time, but it is
> unpredictable
> + * how long it will take.
> + */
> +#define MAX_COUNT_LONG 50
> +
> +#define SLEEP_DURATION_LONG_LOW 200
> +#define SLEEP_DURATION_LONG_HI 220
> +
> +/* After sending TPM_READY to 'reset' the TPM we have to sleep even longer
> */
> +#define SLEEP_DURATION_RESET_LOW 2400
> +#define SLEEP_DURATION_RESET_HI 2600
> +
> +/* we want to use usleep_range instead of msleep for the 5ms TPM_TIMEOUT
> */
> +#define TPM_TIMEOUT_US_LOW (TPM_TIMEOUT * 1000)
> +#define TPM_TIMEOUT_US_HI  (TPM_TIMEOUT_US_LOW + 2000)
> +
> +/* expected value for DIDVID register */
> +#define TPM_TIS_I2C_DID_VID 0x000b15d1L
> +
> +/* Structure to store I2C TPM specific stuff */
> +struct tpm_inf_dev {
> +	struct i2c_client *client;
> +	u8 buf[TPM_BUFSIZE + sizeof(u8)]; /* max. buffer size + addr */
> +	struct tpm_chip *chip;
> +};
> +
> +static struct tpm_inf_dev tpm_dev;
> +static struct i2c_driver tpm_tis_i2c_driver;
> +
> +/*
> + * iic_tpm_read() - read from TPM register
> + * @addr: register address to read from
> + * @buffer: provided by caller
> + * @len: number of bytes to read
> + *
> + * Read len bytes from TPM register and put them into
> + * buffer (little-endian format, i.e. first byte is put into buffer[0]).
> + *
> + * NOTE: TPM is big-endian for multi-byte values. Multi-byte
> + * values have to be swapped.
> + *
> + * NOTE: We can't unfortunately use the combined read/write functions
> + * provided by the i2c core as the TPM currently does not support the
> + * repeated start condition and due to it's special requirements.
> + * The i2c_smbus* functions do not work for this chip.
> + *
> + * Return -EIO on error, 0 on success.
> + */
> +static int iic_tpm_read(u8 addr, u8 *buffer, size_t len)
> +{
> +
> +	struct i2c_msg msg1 = { tpm_dev.client->addr, 0, 1, &addr };
> +	struct i2c_msg msg2 = { tpm_dev.client->addr, I2C_M_RD, len, buffer };
> +
> +	int rc;
> +	int count;
> +
> +	for (count = 0; count < MAX_COUNT; count++) {
> +		rc = i2c_transfer(tpm_dev.client->adapter, &msg1, 1);
> +		if (rc > 0)
> +			break;	/* break here to skip sleep */
> +
> +		usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI);
> +	}
> +
> +	if (rc <= 0)
> +		return -EIO;
> +
> +	/* After the TPM has successfully received the register address it needs
> +	 * some time, thus we're sleeping here again, before retrieving the data
> +	 */
> +	for (count = 0; count < MAX_COUNT; count++) {
> +		usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI);
> +		rc = i2c_transfer(tpm_dev.client->adapter, &msg2, 1);
> +		if (rc > 0)
> +			break;
> +
> +	}
> +
> +	if (rc <= 0)
> +		return -EIO;
> +
> +	return 0;
> +}
> +
> +static int iic_tpm_write_generic(u8 addr, u8 *buffer, size_t len,
> +				 unsigned int sleep_low,
> +				 unsigned int sleep_hi, u8 max_count)
> +{
> +	int rc = -EIO;
> +	int count;
> +
> +	struct i2c_msg msg1 = { tpm_dev.client->addr, 0, len + 1, tpm_dev.buf };
> +
> +	if (len > TPM_BUFSIZE)
> +		return -EINVAL;
> +
> +	/* prepend the 'register address' to the buffer */
> +	tpm_dev.buf[0] = addr;
> +	memcpy(&(tpm_dev.buf[1]), buffer, len);
> +
> +	/*
> +	 * NOTE: We have to use these special mechanisms here and unfortunately
> +	 * cannot rely on the standard behavior of i2c_transfer.
> +	 */
> +	for (count = 0; count < max_count; count++) {
> +		rc = i2c_transfer(tpm_dev.client->adapter, &msg1, 1);
> +		if (rc > 0)
> +			break;
> +
> +		usleep_range(sleep_low, sleep_hi);
> +	}
> +
> +	if (rc <= 0)
> +		return -EIO;
> +
> +	return 0;
> +}
> +
> +/*
> + * iic_tpm_write() - write to TPM register
> + * @addr: register address to write to
> + * @buffer: containing data to be written
> + * @len: number of bytes to write
> + *
> + * Write len bytes from provided buffer to TPM register (little
> + * endian format, i.e. buffer[0] is written as first byte).
> + *
> + * NOTE: TPM is big-endian for multi-byte values. Multi-byte
> + * values have to be swapped.
> + *
> + * NOTE: use this function instead of the iic_tpm_write_generic function.
> + *
> + * Return -EIO on error, 0 on success
> + */
> +static int iic_tpm_write(u8 addr, u8 *buffer, size_t len)
> +{
> +	return iic_tpm_write_generic(addr, buffer, len, SLEEP_DURATION_LOW,
> +				     SLEEP_DURATION_HI, MAX_COUNT);
> +}
> +
> +/*
> + * This function is needed especially for the cleanup situation after
> + * sending TPM_READY
> + * */
> +static int iic_tpm_write_long(u8 addr, u8 *buffer, size_t len)
> +{
> +	return iic_tpm_write_generic(addr, buffer, len, SLEEP_DURATION_LONG_LOW,
> +				     SLEEP_DURATION_LONG_HI, MAX_COUNT_LONG);
> +}
> +
> +enum tis_access {
> +	TPM_ACCESS_VALID = 0x80,
> +	TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
> +	TPM_ACCESS_REQUEST_PENDING = 0x04,
> +	TPM_ACCESS_REQUEST_USE = 0x02,
> +};
> +
> +enum tis_status {
> +	TPM_STS_VALID = 0x80,
> +	TPM_STS_COMMAND_READY = 0x40,
> +	TPM_STS_GO = 0x20,
> +	TPM_STS_DATA_AVAIL = 0x10,
> +	TPM_STS_DATA_EXPECT = 0x08,
> +};
> +
> +enum tis_defaults {
> +	TIS_SHORT_TIMEOUT = 750,	/* ms */
> +	TIS_LONG_TIMEOUT = 2000,	/* 2 sec */
> +};
> +
> +#define	TPM_ACCESS(l)			(0x0000 | ((l) << 4))
> +#define	TPM_STS(l)			(0x0001 | ((l) << 4))
> +#define	TPM_DATA_FIFO(l)		(0x0005 | ((l) << 4))
> +#define	TPM_DID_VID(l)			(0x0006 | ((l) << 4))
> +
> +static int check_locality(struct tpm_chip *chip, int loc)
> +{
> +	u8 buf;
> +	int rc;
> +
> +	rc = iic_tpm_read(TPM_ACCESS(loc), &buf, 1);
> +	if (rc < 0)
> +		return rc;
> +
> +	if ((buf & (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
> +	    (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) {
> +		chip->vendor.locality = loc;
> +		return loc;
> +	}
> +
> +	return -EIO;
> +}
> +
> +/* implementation similar to tpm_tis */
> +static void release_locality(struct tpm_chip *chip, int loc, int force)
> +{
> +	u8 buf;
> +	if (iic_tpm_read(TPM_ACCESS(loc), &buf, 1) < 0)
> +		return;
> +
> +	if (force || (buf & (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) ==
> +	    (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) {
> +		buf = TPM_ACCESS_ACTIVE_LOCALITY;
> +		iic_tpm_write(TPM_ACCESS(loc), &buf, 1);
> +	}
> +}
> +
> +static int request_locality(struct tpm_chip *chip, int loc)
> +{
> +	unsigned long stop;
> +	u8 buf = TPM_ACCESS_REQUEST_USE;
> +
> +	if (check_locality(chip, loc) >= 0)
> +		return loc;
> +
> +	iic_tpm_write(TPM_ACCESS(loc), &buf, 1);
> +
> +	/* wait for burstcount */
> +	stop = jiffies + chip->vendor.timeout_a;
> +	do {
> +		if (check_locality(chip, loc) >= 0)
> +			return loc;
> +		usleep_range(TPM_TIMEOUT_US_LOW, TPM_TIMEOUT_US_HI);
> +	} while (time_before(jiffies, stop));
> +
> +	return -ETIME;
> +}
> +
> +static u8 tpm_tis_i2c_status(struct tpm_chip *chip)
> +{
> +	/* NOTE: since I2C read may fail, return 0 in this case --> time-out */
> +	u8 buf;
> +	if (iic_tpm_read(TPM_STS(chip->vendor.locality), &buf, 1) < 0)
> +		return 0;
> +	else
> +		return buf;
> +}
> +
> +static void tpm_tis_i2c_ready(struct tpm_chip *chip)
> +{
> +	/* this causes the current command to be aborted */
> +	u8 buf = TPM_STS_COMMAND_READY;
> +	iic_tpm_write_long(TPM_STS(chip->vendor.locality), &buf, 1);
> +}
> +
> +static ssize_t get_burstcount(struct tpm_chip *chip)
> +{
> +	unsigned long stop;
> +	ssize_t burstcnt;
> +	u8 buf[3];
> +
> +	/* wait for burstcount */
> +	/* which timeout value, spec has 2 answers (c & d) */
> +	stop = jiffies + chip->vendor.timeout_d;
> +	do {
> +		/* Note: STS is little endian */
> +		if (iic_tpm_read(TPM_STS(chip->vendor.locality)+1, buf, 3) < 0)
> +			burstcnt = 0;
> +		else
> +			burstcnt = (buf[2] << 16) + (buf[1] << 8) + buf[0];
> +
> +		if (burstcnt)
> +			return burstcnt;
> +
> +		usleep_range(TPM_TIMEOUT_US_LOW, TPM_TIMEOUT_US_HI);
> +	} while (time_before(jiffies, stop));
> +	return -EBUSY;
> +}
> +
> +static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long
> timeout,
> +			 int *status)
> +{
> +	unsigned long stop;
> +
> +	/* check current status */
> +	*status = tpm_tis_i2c_status(chip);
> +	if ((*status & mask) == mask)
> +		return 0;
> +
> +	stop = jiffies + timeout;
> +	do {
> +		/* since we just checked the status, give the TPM some time */
> +		usleep_range(TPM_TIMEOUT_US_LOW, TPM_TIMEOUT_US_HI);
> +		*status = tpm_tis_i2c_status(chip);
> +		if ((*status & mask) == mask)
> +			return 0;
> +
> +	} while (time_before(jiffies, stop));
> +
> +	return -ETIME;
> +}
> +
> +static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
> +{
> +	size_t size = 0;
> +	ssize_t burstcnt;
> +	u8 retries = 0;
> +	int rc;
> +
> +	while (size < count) {
> +		burstcnt = get_burstcount(chip);
> +
> +		/* burstcnt < 0 = TPM is busy */
> +		if (burstcnt < 0)
> +			return burstcnt;
> +
> +		/* limit received data to max. left */
> +		if (burstcnt > (count - size))
> +			burstcnt = count - size;
> +
> +		rc = iic_tpm_read(TPM_DATA_FIFO(chip->vendor.locality),
> +				  &(buf[size]), burstcnt);
> +		if (rc == 0)
> +			size += burstcnt;
> +		else if (rc < 0)
> +			retries++;
> +
> +		/* avoid endless loop in case of broken HW */
> +		if (retries > MAX_COUNT_LONG)
> +			return -EIO;
> +
> +	}
> +	return size;
> +}
> +
> +static int tpm_tis_i2c_recv(struct tpm_chip *chip, u8 *buf, size_t count)
> +{
> +	int size = 0;
> +	int expected, status;
> +
> +	if (count < TPM_HEADER_SIZE) {
> +		size = -EIO;
> +		goto out;
> +	}
> +
> +	/* read first 10 bytes, including tag, paramsize, and result */
> +	size = recv_data(chip, buf, TPM_HEADER_SIZE);
> +	if (size < TPM_HEADER_SIZE) {
> +		dev_err(chip->dev, "Unable to read header\n");
> +		goto out;
> +	}
> +
> +	expected = be32_to_cpu(*(__be32 *)(buf + 2));
> +	if ((size_t) expected > count) {
> +		size = -EIO;
> +		goto out;
> +	}
> +
> +	size += recv_data(chip, &buf[TPM_HEADER_SIZE],
> +			  expected - TPM_HEADER_SIZE);
> +	if (size < expected) {
> +		dev_err(chip->dev, "Unable to read remainder of result\n");
> +		size = -ETIME;
> +		goto out;
> +	}
> +
> +	wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c, &status);
> +	if (status & TPM_STS_DATA_AVAIL) {	/* retry? */
> +		dev_err(chip->dev, "Error left over data\n");
> +		size = -EIO;
> +		goto out;
> +	}
> +
> +out:
> +	tpm_tis_i2c_ready(chip);
> +	/* The TPM needs some time to clean up here,
> +	 * so we sleep rather than keeping the bus busy
> +	 */
> +	usleep_range(SLEEP_DURATION_RESET_LOW, SLEEP_DURATION_RESET_HI);
> +	release_locality(chip, chip->vendor.locality, 0);
> +	return size;
> +}
> +
> +static int tpm_tis_i2c_send(struct tpm_chip *chip, u8 *buf, size_t len)
> +{
> +	int rc, status;
> +	ssize_t burstcnt;
> +	size_t count = 0;
> +	u8 retries = 0;
> +	u8 sts = TPM_STS_GO;
> +
> +	if (len > TPM_BUFSIZE)
> +		return -E2BIG;	/* command is too long for our tpm, sorry */
> +
> +	if (request_locality(chip, 0) < 0)
> +		return -EBUSY;
> +
> +	status = tpm_tis_i2c_status(chip);
> +	if ((status & TPM_STS_COMMAND_READY) == 0) {
> +		tpm_tis_i2c_ready(chip);
> +		if (wait_for_stat
> +		    (chip, TPM_STS_COMMAND_READY,
> +		     chip->vendor.timeout_b, &status) < 0) {
> +			rc = -ETIME;
> +			goto out_err;
> +		}
> +	}
> +
> +	while (count < len - 1) {
> +		burstcnt = get_burstcount(chip);
> +
> +		/* burstcnt < 0 = TPM is busy */
> +		if (burstcnt < 0)
> +			return burstcnt;
> +
> +		if (burstcnt > (len - 1 - count))
> +			burstcnt = len - 1 - count;
> +
> +		rc = iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality),
> +				   &(buf[count]), burstcnt);
> +		if (rc == 0)
> +			count += burstcnt;
> +		else if (rc < 0)
> +			retries++;
> +
> +		/* avoid endless loop in case of broken HW */
> +		if (retries > MAX_COUNT_LONG) {
> +			rc = -EIO;
> +			goto out_err;
> +		}
> +
> +		wait_for_stat(chip, TPM_STS_VALID,
> +			      chip->vendor.timeout_c, &status);
> +
> +		if ((status & TPM_STS_DATA_EXPECT) == 0) {
> +			rc = -EIO;
> +			goto out_err;
> +		}
> +
> +	}
> +
> +	/* write last byte */
> +	iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality), &(buf[count]), 1);
> +	wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c, &status);
> +	if ((status & TPM_STS_DATA_EXPECT) != 0) {
> +		rc = -EIO;
> +		goto out_err;
> +	}
> +
> +	/* go and do it */
> +	iic_tpm_write(TPM_STS(chip->vendor.locality), &sts, 1);
> +
> +	return len;
> +out_err:
> +	tpm_tis_i2c_ready(chip);
> +	/* The TPM needs some time to clean up here,
> +	 * so we sleep rather than keeping the bus busy
> +	 */
> +	usleep_range(SLEEP_DURATION_RESET_LOW, SLEEP_DURATION_RESET_HI);
> +	release_locality(chip, chip->vendor.locality, 0);
> +	return rc;
> +}
> +
> +static const struct file_operations tis_ops = {
> +	.owner = THIS_MODULE,
> +	.llseek = no_llseek,
> +	.open = tpm_open,
> +	.read = tpm_read,
> +	.write = tpm_write,
> +	.release = tpm_release,
> +};
> +
> +static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
> +static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
> +static DEVICE_ATTR(enabled, S_IRUGO, tpm_show_enabled, NULL);
> +static DEVICE_ATTR(active, S_IRUGO, tpm_show_active, NULL);
> +static DEVICE_ATTR(owned, S_IRUGO, tpm_show_owned, NULL);
> +static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated,
> NULL);
> +static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
> +static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
> +static DEVICE_ATTR(durations, S_IRUGO, tpm_show_durations, NULL);
> +static DEVICE_ATTR(timeouts, S_IRUGO, tpm_show_timeouts, NULL);
> +
> +static struct attribute *tis_attrs[] = {
> +	&dev_attr_pubek.attr,
> +	&dev_attr_pcrs.attr,
> +	&dev_attr_enabled.attr,
> +	&dev_attr_active.attr,
> +	&dev_attr_owned.attr,
> +	&dev_attr_temp_deactivated.attr,
> +	&dev_attr_caps.attr,
> +	&dev_attr_cancel.attr,
> +	&dev_attr_durations.attr,
> +	&dev_attr_timeouts.attr,
> +	NULL,
> +};
> +
> +static struct attribute_group tis_attr_grp = {
> +	.attrs = tis_attrs
> +};
> +
> +static struct tpm_vendor_specific tpm_tis_i2c = {
> +	.status = tpm_tis_i2c_status,
> +	.recv = tpm_tis_i2c_recv,
> +	.send = tpm_tis_i2c_send,
> +	.cancel = tpm_tis_i2c_ready,
> +	.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
> +	.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
> +	.req_canceled = TPM_STS_COMMAND_READY,
> +	.attr_group = &tis_attr_grp,
> +	.miscdev.fops = &tis_ops,
> +};
> +
> +static int __devinit tpm_tis_i2c_init(struct device *dev)
> +{
> +	u32 vendor;
> +	int rc = 0;
> +	struct tpm_chip *chip;
> +
> +	chip = tpm_register_hardware(dev, &tpm_tis_i2c);
> +	if (!chip) {
> +		rc = -ENODEV;
> +		goto out_err;
> +	}
> +
> +	/* Disable interrupts */
> +	chip->vendor.irq = 0;
> +
> +	/* Default timeouts */
> +	chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> +	chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
> +	chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> +	chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> +
> +	if (request_locality(chip, 0) != 0) {
> +		rc = -ENODEV;
> +		goto out_vendor;
> +	}
> +
> +	/* read four bytes from DID_VID register */
> +	if (iic_tpm_read(TPM_DID_VID(0), (u8 *)&vendor, 4) < 0) {
> +		rc = -EIO;
> +		goto out_release;
> +	}
> +
> +	/* create DID_VID register value, after swapping to little-endian */
> +	vendor = be32_to_cpu((__be32) vendor);
> +
> +	if (vendor != TPM_TIS_I2C_DID_VID) {
> +		rc = -ENODEV;
> +		goto out_release;
> +	}
> +
> +	dev_info(dev, "1.2 TPM (device-id 0x%X)\n", vendor >> 16);
> +
> +	INIT_LIST_HEAD(&chip->vendor.list);
> +	tpm_dev.chip = chip;
> +
> +	tpm_get_timeouts(chip);
> +	tpm_do_selftest(chip);
> +
> +	return 0;
> +
> +out_release:
> +	release_locality(chip, chip->vendor.locality, 1);
> +
> +out_vendor:
> +	/* close file handles */
> +	tpm_dev_vendor_release(chip);
> +
> +	/* remove hardware */
> +	tpm_remove_hardware(chip->dev);
> +
> +	/* reset these pointers, otherwise we oops */
> +	chip->dev->release = NULL;
> +	chip->release = NULL;
> +	tpm_dev.client = NULL;
> +	dev_set_drvdata(chip->dev, chip);
> +out_err:
> +	return rc;
> +}
> +
> +static const struct i2c_device_id tpm_tis_i2c_table[] = {
> +	{"tpm_i2c_infineon", 0},
> +	{},
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, tpm_tis_i2c_table);
> +
> +#ifdef CONFIG_PM
> +/* NOTE:
> + * Suspend does currently not work Nvidias Tegra2 Platform
> + * but works fine on Beagleboard (arm omap).
> + *
> + * This function will block System Suspend if TPM is not initialized,
> + * however the TPM is usually initialized by BIOS/u-boot or by sending
> + * a TPM_Startup command.
> + */
> +static int tpm_tis_i2c_suspend(struct device *dev)
> +{
> +	return tpm_pm_suspend(dev, dev->power.power_state);
> +}
> +
> +static int tpm_tis_i2c_resume(struct device *dev)
> +{
> +	return tpm_pm_resume(dev);
> +}
> +
> +static const struct dev_pm_ops tpm_tis_i2c_ops = {
> +	.suspend = tpm_tis_i2c_suspend,
> +	.resume = tpm_tis_i2c_resume,
> +};
> +#else
> +#define tpm_tis_i2c_suspend NULL
> +#define tpm_tis_i2c_resume NULL
> +#define tpm_tis_i2c_ops NULL
> +#endif
> +
> +static int __devinit tpm_tis_i2c_probe(struct i2c_client *client,
> +			     const struct i2c_device_id *id)
> +{
> +	int rc;
> +	if (tpm_dev.client != NULL)
> +		return -EBUSY;	/* We only support one client */
> +
> +	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> +		dev_err(&client->dev,
> +			"no algorithms associated to the i2c bus\n");
> +		return -ENODEV;
> +	}
> +
> +	client->driver = &tpm_tis_i2c_driver;
> +	tpm_dev.client = client;
> +	rc = tpm_tis_i2c_init(&client->dev);
> +	if (rc != 0) {
> +		client->driver = NULL;
> +		tpm_dev.client = NULL;
> +		rc = -ENODEV;
> +	}
> +	return rc;
> +}
> +
> +static int __devexit tpm_tis_i2c_remove(struct i2c_client *client)
> +{
> +	struct tpm_chip *chip = tpm_dev.chip;
> +	release_locality(chip, chip->vendor.locality, 1);
> +
> +	/* close file handles */
> +	tpm_dev_vendor_release(chip);
> +
> +	/* remove hardware */
> +	tpm_remove_hardware(chip->dev);
> +
> +	/* reset these pointers, otherwise we oops */
> +	chip->dev->release = NULL;
> +	chip->release = NULL;
> +	tpm_dev.client = NULL;
> +	dev_set_drvdata(chip->dev, chip);
> +
> +	return 0;
> +}
> +
> +static struct i2c_driver tpm_tis_i2c_driver = {
> +
> +	.id_table = tpm_tis_i2c_table,
> +	.probe = tpm_tis_i2c_probe,
> +	.remove = tpm_tis_i2c_remove,
> +	.driver = {
> +		   .name = "tpm_i2c_infineon",
> +		   .owner = THIS_MODULE,
> +		   .pm = &tpm_tis_i2c_ops,
> +		   },
> +};
> +
> +module_i2c_driver(tpm_tis_i2c_driver);
> +MODULE_AUTHOR("Peter Huewe <peter.huewe@xxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("TPM TIS I2C Infineon Driver");
> +MODULE_VERSION("2.1.4");
> +MODULE_LICENSE("GPL");
> --
> 1.7.6.msysgit.0
>
>


-- 
Andi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/