RE: [PATCH RFT] regulator: tps65217: Convert toregulator_[is_enabled|get_voltage_sel]_regmap

[AnilKumar, Chimata]

Hi Axel,

On Wed, Jun 13, 2012 at 08:57:11, Axel Lin wrote:
> This patch converts .is_enabled and .get_voltage_sel to
> regulator_is_enabled_regmap and regulator_get_voltage_sel_regmap.
> 
> For .enable, .disable, and .set_voltage_sel, the write protect level is either
> 1 or 2. So we cannot use regulator_[enable|disable|set_voltage_sel]_regmap.
> 
> Now we store the enable reg/mask and vsel reg/mask in regulator_desc,
> so we can remove enable_mask, set_vout_reg, and set_vout_mask from
> struct tps_info.
> 
> Signed-off-by: Axel Lin <axel.lin@xxxxxxxxx>
> ---
> Hi AnilKumar,
> Any chance to test this patch on your hardware?

I will give the status in a day or two.

Regards
AnilKumar--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/