Re: Initializing iwl3945 error

From: Kamil Grzebien
Date: Mon Jul 02 2012 - 16:49:05 EST

Next message: Thierry Reding: "Re: [PATCH v2 1/3] pwm: Convert pwm-imx to use devm_* APIs"
Previous message: Thierry Reding: "Re: [PATCH v2 3/3] pwm: Convert pwm-vt8500 to use devm_* APIs"
In reply to: Stanislaw Gruszka: "Re: Initializing iwl3945 error"
Next in thread: Bjorn Helgaas: "Re: Initializing iwl3945 error"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, Jul 2, 2012 at 6:31 AM, Stanislaw Gruszka <sgruszka@xxxxxxxxxx> wrote:
> On Sun, Jul 01, 2012 at 07:01:58PM +0100, Kamil Grzebien wrote:
>> I haven't tried your patch yet, but wanted to share with one thing.
>> Currently I use new kernel 3.4.3, where the problem doesn't exist
>> anymore. However I still would like to know what was the cause and
>> which change brought the solution. Is there anything which comes to
>> your mind in terms of recent changes in kernel? I also added logs from
>> the newest kernel, so it might be easier for track it.
>
> Below is the diff from working kernel and non working kernel.
> You are using PAE kernel what influence PCI mappings. Is this fixed also
> on 3.4 non-PAE kernel?

The problem is also fixed in non-PAE kernel. I've attached the logs
from that kernel also. Besides that currently I was comparing both PAE
kernels installed on my machine - kernel 3.3.7 (problem exist) and
kernel 3.4.3 (problem solved). There must be something that has
changed either in the code or maybe kernel configuration!?

Regards,
Kamil

>
> Stanislaw
>
> --- bad/dmesg.log 2012-05-28 15:12:13.559424823 +0200
> +++ dmesg.log 2012-07-02 07:22:35.534393336 +0200
> @@ -1,6 +1,6 @@
> Initializing cgroup subsys cpuset
> Initializing cgroup subsys cpu
> -Linux version 3.3.0-4.fc16.i686 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Tue Mar 20 18:45:14 UTC 2012
> +Linux version 3.4.3-1.fc17.i686.PAE (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #1 SMP Mon Jun 18 20:31:39 UTC 2012
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> @@ -14,12 +14,12 @@ BIOS-provided physical RAM map:
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
> -Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
> +NX (Execute Disable) protection: active
> DMI 2.4 present.
> DMI: Dell Inc. XPS M1530 /0D501F, BIOS A12 11/19/2008
> e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
> e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
> -last_pfn = 0xdfe72 max_arch_pfn = 0x100000
> +last_pfn = 0x120000 max_arch_pfn = 0x1000000
> MTRR default type: uncachable
> MTRR fixed ranges enabled:
> 00000-9FFFF write-back
> @@ -52,14 +52,14 @@ reg 1, base: 3583MB, range: 1MB, type UC
> reg 2, base: 3584MB, range: 512MB, type UC
> reg 3, base: 4GB, range: 512MB, type WB
> e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
> -initial memory mapped : 0 - 01000000
> -9b000 size 16384
> -init_memory_mapping: 0000000000000000-00000000373fe000
> - 0000000000 - 0000400000 page 4k
> - 0000400000 - 0037000000 page 2M
> - 0037000000 - 00373fe000 page 4k
> -kernel direct mapping tables up to 373fe000 @ ffa000-1000000
> -RAMDISK: 35f5c000 - 36fa6000
> +initial memory mapped : 0 - 01200000
> +Base memory trampoline at [c009b000] 9b000 size 16384
> +init_memory_mapping: 0000000000000000-00000000375fe000
> + 0000000000 - 0000200000 page 4k
> + 0000200000 - 0037400000 page 2M
> + 0037400000 - 00375fe000 page 4k
> +kernel direct mapping tables up to 375fe000 @ 11f8000-1200000
> +RAMDISK: 3615c000 - 370a6000
> ACPI: RSDP 000fbc90 00024 (v02 DELL )
> ACPI: XSDT dfe73a00 00064 (v01 DELL M08 27D80B13 ASL 00000061)
> ACPI: FACP dfe7389c 000F4 (v04 DELL M08 27D80B13 ASL 00000061)
> @@ -73,35 +73,36 @@ ACPI: OSFR dfe73200 0002C (v01 DELL M
> ACPI: BOOT dfe737c0 00028 (v01 DELL M08 27D80B13 ASL 00000061)
> ACPI: SSDT dfe7217e 004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
> ACPI: Local APIC address 0xfee00000
> -2698MB HIGHMEM available.
> -883MB LOWMEM available.
> - mapped low ram: 0 - 373fe000
> - low ram: 0 - 373fe000
> +3722MB HIGHMEM available.
> +885MB LOWMEM available.
> + mapped low ram: 0 - 375fe000
> + low ram: 0 - 375fe000
> Zone PFN ranges:
> DMA 0x00000010 -> 0x00001000
> - Normal 0x00001000 -> 0x000373fe
> - HighMem 0x000373fe -> 0x000dfe72
> + Normal 0x00001000 -> 0x000375fe
> + HighMem 0x000375fe -> 0x00120000
> Movable zone start PFN for each node
> Early memory PFN ranges
> 0: 0x00000010 -> 0x0000009f
> 0: 0x00000100 -> 0x000dfe72
> -On node 0 totalpages: 916993
> -free_area_init_node: node 0, pgdat c0ba2f00, node_mem_map f435c200
> + 0: 0x00100000 -> 0x00120000
> +On node 0 totalpages: 1048065
> +free_area_init_node: node 0, pgdat c0bd0d40, node_mem_map f3d5c200
> DMA zone: 32 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 3951 pages, LIFO batch:0
> - Normal zone: 1736 pages used for memmap
> - Normal zone: 220470 pages, LIFO batch:31
> - HighMem zone: 5397 pages used for memmap
> - HighMem zone: 685407 pages, LIFO batch:31
> + Normal zone: 1740 pages used for memmap
> + Normal zone: 220978 pages, LIFO batch:31
> + HighMem zone: 7445 pages used for memmap
> + HighMem zone: 813919 pages, LIFO batch:31
> Using APIC driver default
> ACPI: PM-Timer IO Port: 0x1008
> ACPI: Local APIC address 0xfee00000
> -enabled)
> -enabled)
> -high edge lint[0x1])
> -high edge lint[0x1])
> -gsi_base[0])
> +ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> +ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> +ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> +ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> +ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> @@ -117,40 +118,39 @@ PM: Registered nosave memory: 0000000000
> Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
> Booting paravirtualized kernel on bare hardware
> setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
> -PERCPU: Embedded 13 pages/cpu @f3c00000 s31168 r0 d22080 u2097152
> -pcpu-alloc: s31168 r0 d22080 u2097152 alloc=1*4194304
> -0 1
> -Built 1 zonelists in Zone order, mobility grouping on. Total pages: 909828
> -Kernel command line: BOOT_IMAGE=/vmlinuz-3.3.0-4.fc16.i686 root=UUID=7417d839-a647-466e-b57d-fc65d20a6342 ro rd.md=0 rd.lvm=0 rd.dm=0 quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 KEYTABLE=pl2 LANG=en_US.UTF-8
> +PERCPU: Embedded 14 pages/cpu @f75cf000 s34112 r0 d23232 u57344
> +pcpu-alloc: s34112 r0 d23232 u57344 alloc=14*4096
> +pcpu-alloc: [0] 0 [0] 1
> +Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038848
> +Kernel command line: BOOT_IMAGE=/vmlinuz-3.4.3-1.fc17.i686.PAE root=UUID=29c27e52-ab08-4c1a-9ed7-86ab260b207b ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True KEYTABLE=pl2 rd.luks=0 LANG=pl_PL.UTF-8 rhgb quiet
> PID hash table entries: 4096 (order: 2, 16384 bytes)
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Initializing CPU#0
> -allocated 7336720 bytes of page_cgroup
> +allocated 9437056 bytes of page_cgroup
> please try 'cgroup_disable=memory' option if you don't want memory cgroups
> -Initializing HighMem for node 0 (000373fe:000dfe72)
> -Memory: 3605028k/3668424k available (5337k kernel code, 62944k reserved, 2570k data, 620k init, 2763216k highmem)
> +Initializing HighMem for node 0 (000375fe:00120000)
> +Memory: 4119724k/4718592k available (5442k kernel code, 72536k reserved, 2650k data, 640k init, 3285456k highmem)
> virtual kernel memory layout:
> fixmap : 0xffa96000 - 0xfffff000 (5540 kB)
> - pkmap : 0xff400000 - 0xff800000 (4096 kB)
> - vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
> - lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
> - .init : 0xc0bb9000 - 0xc0c54000 ( 620 kB)
> - .data : 0xc093671f - 0xc0bb8f80 (2570 kB)
> - .text : 0xc0400000 - 0xc093671f (5337 kB)
> + pkmap : 0xff600000 - 0xff800000 (2048 kB)
> + vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
> + lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
> + .init : 0xc0be8000 - 0xc0c88000 ( 640 kB)
> + .data : 0xc0950a93 - 0xc0be7480 (2650 kB)
> + .text : 0xc0400000 - 0xc0950a93 (5442 kB)
> Checking if this processor honours the WP bit even in supervisor mode...Ok.
> SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
> Hierarchical RCU implementation.
> - RCU dyntick-idle grace-period acceleration is enabled.
> NR_IRQS:2304 nr_irqs:512 16
> CPU 0 irqstacks, hard=f3008000 soft=f300a000
> Extended CMOS year: 2000
> Console: colour dummy device 80x25
> -enabled
> +console [tty0] enabled
> hpet clockevent registered
> Fast TSC calibration using PIT
> -Detected 2394.148 MHz processor.
> -Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.29 BogoMIPS (lpj=2394148)
> +Detected 2393.857 MHz processor.
> +Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.71 BogoMIPS (lpj=2393857)
> pid_max: default: 32768 minimum: 301
> Security Framework initialized
> SELinux: Initializing.
> @@ -168,12 +168,12 @@ CPU: Processor Core ID: 0
> mce: CPU supports 6 MCE banks
> CPU0: Thermal monitoring enabled (TM2)
> using mwait in idle threads.
> -ACPI: Core revision 20120111
> -ftrace: allocating 21899 entries in 43 pages
> +ACPI: Core revision 20120320
> +ftrace: allocating 22370 entries in 44 pages
> Enabling APIC mode: Flat. Using 1 I/O APICs
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
> -Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
> +Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
> ... version: 2
> ... bit width: 40
> ... generic registers: 2
> @@ -181,17 +181,16 @@ Performance Events: PEBS fmt0+, Core2 ev
> ... max period: 000000007fffffff
> ... fixed-purpose events: 3
> ... event mask: 0000000700000003
> -NMI watchdog enabled, takes one hw-pmu counter.
> -CPU 1 irqstacks, hard=f30ce000 soft=f30d8000
> +NMI watchdog: enabled, takes one hw-pmu counter.
> +CPU 1 irqstacks, hard=f30e0000 soft=f30e2000
> Booting Node 0, Processors #1 Ok.
> -smpboot cpu 1: start_ip = 9b000
> Initializing CPU#1
> -NMI watchdog enabled, takes one hw-pmu counter.
> +NMI watchdog: enabled, takes one hw-pmu counter.
> Brought up 2 CPUs
> -Total of 2 processors activated (9576.59 BogoMIPS).
> +Total of 2 processors activated (9575.42 BogoMIPS).
> devtmpfs: initialized
> atomic64 test passed for i586+ platform with CX8 and with SSE
> -RTC time: 12:29:27, date: 04/08/12
> +RTC time: 18:54:40, date: 07/01/12
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> @@ -222,7 +221,7 @@ ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: No dock devices found.
> PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> -(domain 0000 [bus 00-ff])
> +ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
> pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
> pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
> @@ -235,7 +234,7 @@ pci_root PNP0A03:00: host bridge window
> pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff]
> pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff]
> pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff]
> -pci_root PNP0A03:00: host bridge window [0x120000000-0x317ffffff] (ignored, not CPU addressable)
> +pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff]
> PCI host bridge to bus 0000:00
> pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> @@ -249,48 +248,49 @@ pci_bus 0000:00: root bus resource [mem
> pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff]
> pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff]
> pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff]
> -type 0 class 0x000600
> -type 1 class 0x000604
> +pci_bus 0000:00: root bus resource [mem 0x120000000-0x317ffffff]
> +pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
> +pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> -type 0 class 0x000c03
> +pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
> pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f]
> -type 0 class 0x000c03
> +pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
> pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f]
> -pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
> +pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
> pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> -pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
> +pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
> pci 0000:00:1b.0: reg 10: [mem 0xf6ffc000-0xf6ffffff 64bit]
> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> -pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
> +pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> -type 1 class 0x000604
> +pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> -type 1 class 0x000604
> +pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
> pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> -type 0 class 0x000c03
> +pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
> pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f]
> -type 0 class 0x000c03
> +pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
> pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f]
> -type 0 class 0x000c03
> +pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
> pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f]
> -type 0 class 0x000c03
> +pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
> pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> -type 1 class 0x000604
> -type 0 class 0x000601
> +pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
> +pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
> pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
> pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
> pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
> pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007)
> pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
> -type 0 class 0x000101
> +pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
> pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
> pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
> pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
> pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
> pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf]
> -type 0 class 0x000106
> +pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
> pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7]
> pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb]
> pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7]
> @@ -298,10 +298,10 @@ pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x
> pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff]
> pci 0000:00:1f.2: reg 24: [mem 0xf6ffb800-0xf6ffbfff]
> pci 0000:00:1f.2: PME# supported from D3hot
> -pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
> +pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
> pci 0000:00:1f.3: reg 10: [mem 0xf6ffb700-0xf6ffb7ff]
> pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df]
> -type 0 class 0x000300
> +pci 0000:01:00.0: [10de:0407] type 00 class 0x030000
> pci 0000:01:00.0: reg 10: [mem 0xf5000000-0xf5ffffff]
> pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
> pci 0000:01:00.0: reg 1c: [mem 0xf2000000-0xf3ffffff 64bit]
> @@ -311,7 +311,7 @@ pci 0000:00:01.0: PCI bridge to [bus 01-
> pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
> pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf6efffff]
> pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
> -type 0 class 0x000200
> +pci 0000:09:00.0: [11ab:4354] type 00 class 0x020000
> pci 0000:09:00.0: reg 10: [mem 0xf1ffc000-0xf1ffffff 64bit]
> pci 0000:09:00.0: reg 18: [io 0xde00-0xdeff]
> pci 0000:09:00.0: supports D1 D2
> @@ -319,7 +319,7 @@ pci 0000:09:00.0: PME# supported from D0
> pci 0000:00:1c.0: PCI bridge to [bus 09-09]
> pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
> pci 0000:00:1c.0: bridge window [mem 0xf1f00000-0xf1ffffff]
> -type 0 class 0x000280
> +pci 0000:0b:00.0: [8086:4222] type 00 class 0x028000
> pci 0000:0b:00.0: reg 10: [mem 0xf1eff000-0xf1efffff]
> pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
> pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> @@ -329,27 +329,25 @@ pci 0000:00:1c.4: PCI bridge to [bus 0c-
> pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
> pci 0000:00:1c.4: bridge window [mem 0xf1c00000-0xf1dfffff]
> pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
> -type 0 class 0x000c00
> -pci 0000:03:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
> -pci 0000:03:09.0: MMC cards are now supported by standard SDHCI controller
> +pci 0000:03:09.0: [1180:0832] type 00 class 0x0c0010
> pci 0000:03:09.0: reg 10: [mem 0xf1bff800-0xf1bfffff]
> pci 0000:03:09.0: supports D1 D2
> pci 0000:03:09.0: PME# supported from D0 D1 D2 D3hot D3cold
> -type 0 class 0x000805
> -pci 0000:03:09.1: reg 10: [mem 0xf1bff400-0xf1bff4ff]
> +pci 0000:03:09.1: [1180:0822] type 00 class 0x080501
> +pci 0000:03:09.1: reg 10: [mem 0xf1bff500-0xf1bff5ff]
> pci 0000:03:09.1: supports D1 D2
> pci 0000:03:09.1: PME# supported from D0 D1 D2 D3hot D3cold
> -type 0 class 0x000880
> +pci 0000:03:09.2: [1180:0592] type 00 class 0x088000
> pci 0000:03:09.2: reg 10: [mem 0xf1bff600-0xf1bff6ff]
> pci 0000:03:09.2: supports D1 D2
> pci 0000:03:09.2: PME# supported from D0 D1 D2 D3hot D3cold
> -type 0 class 0x000880
> +pci 0000:03:09.3: [1180:0852] type 00 class 0x088000
> pci 0000:03:09.3: reg 10: [mem 0xf1bff700-0xf1bff7ff]
> pci 0000:03:09.3: supports D1 D2
> pci 0000:03:09.3: PME# supported from D0 D1 D2 D3hot D3cold
> -(subtractive decode)
> +pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
> pci 0000:00:1e.0: bridge window [mem 0xf1b00000-0xf1bfffff]
> -(subtractive decode)
> +pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
> pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
> pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
> @@ -361,6 +359,7 @@ pci 0000:00:1e.0: bridge window [mem 0
> pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode)
> pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode)
> pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff] (subtractive decode)
> +pci 0000:00:1e.0: bridge window [mem 0x120000000-0x317ffffff] (subtractive decode)
> pci_bus 0000:00: on NUMA node 0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
> @@ -415,7 +414,7 @@ pnp 00:00: [mem 0xfed90000-0xfed9ffff wi
> pnp 00:00: [mem 0xfeda7000-0xfedfffff window]
> pnp 00:00: [mem 0xfee10000-0xff9fffff window]
> pnp 00:00: [mem 0xffc00000-0xffdfffff window]
> -pnp 00:00: [mem 0x20000000-0x17ffffff window]
> +pnp 00:00: [mem 0x120000000-0x317ffffff window]
> pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
> pnp 00:01: [io 0x004e-0x004f]
> pnp 00:01: [io 0x0068-0x006f]
> @@ -468,10 +467,10 @@ pnp 00:0a: [irq 0 disabled]
> pnp 00:0a: [io 0x04d0-0x04d1]
> pnp 00:0a: [io 0x1000-0x1005]
> pnp 00:0a: [io 0x1008-0x100f]
> -because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
> +pnp 00:0a: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
> pnp 00:0a: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
> system 00:0a: [io 0x0900-0x097f] has been reserved
> -has been reserved
> +system 00:0a: [io 0x04d0-0x04d1] has been reserved
> system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
> pnp 00:0b: [io 0xf400-0xf4fe]
> pnp 00:0b: [io 0x0086]
> @@ -481,13 +480,13 @@ pnp 00:0b: [io 0x1080-0x10bf]
> pnp 00:0b: [io 0x10c0-0x10df]
> pnp 00:0b: [io 0x1010-0x102f]
> pnp 00:0b: [io 0x0809]
> -because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
> -because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
> +pnp 00:0b: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
> +pnp 00:0b: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
> pnp 00:0b: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
> system 00:0b: [io 0xf400-0xf4fe] has been reserved
> system 00:0b: [io 0x1080-0x10bf] has been reserved
> system 00:0b: [io 0x10c0-0x10df] has been reserved
> -has been reserved
> +system 00:0b: [io 0x0809] has been reserved
> system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
> pnp 00:0c: [mem 0x00000000-0x0009efff]
> pnp 00:0c: [mem 0x0009f000-0x0009ffff]
> @@ -528,10 +527,15 @@ system 00:0c: [mem 0xf8000000-0xfbffffff
> system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> pnp: PnP ACPI: found 13 devices
> ACPI: ACPI bus type pnp unregistered
> -PCI: max bus depth: 1 pci_try_num: 2
> -pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
> +pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09-09] add_size 200000
> +pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 0b-0b] add_size 1000
> +pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b-0b] add_size 200000
> +pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
> +pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
> +pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
> +pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
> +pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
> pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
> -pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
> pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
> pci 0000:00:01.0: PCI bridge to [bus 01-01]
> pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
> @@ -540,11 +544,11 @@ pci 0000:00:01.0: bridge window [mem 0
> pci 0000:00:1c.0: PCI bridge to [bus 09-09]
> pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
> pci 0000:00:1c.0: bridge window [mem 0xf1f00000-0xf1ffffff]
> -pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
> +pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
> pci 0000:00:1c.1: PCI bridge to [bus 0b-0b]
> pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
> pci 0000:00:1c.1: bridge window [mem 0xf1e00000-0xf1efffff]
> -pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
> +pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
> pci 0000:00:1c.4: PCI bridge to [bus 0c-0d]
> pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
> pci 0000:00:1c.4: bridge window [mem 0xf1c00000-0xf1dfffff]
> @@ -564,15 +568,16 @@ pci_bus 0000:00: resource 12 [mem 0xfed9
> pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff]
> pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff]
> pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff]
> +pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff]
> pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
> pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf6efffff]
> pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
> pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
> pci_bus 0000:09: resource 1 [mem 0xf1f00000-0xf1ffffff]
> -pci_bus 0000:09: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
> +pci_bus 0000:09: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
> pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
> pci_bus 0000:0b: resource 1 [mem 0xf1e00000-0xf1efffff]
> -pci_bus 0000:0b: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
> +pci_bus 0000:0b: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
> pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff]
> pci_bus 0000:0c: resource 1 [mem 0xf1c00000-0xf1dfffff]
> pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
> @@ -589,29 +594,29 @@ pci_bus 0000:03: resource 12 [mem 0xfed9
> pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff]
> pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff]
> pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff]
> +pci_bus 0000:03: resource 16 [mem 0x120000000-0x317ffffff]
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> -TCP reno registered
> +TCP: reno registered
> UDP hash table entries: 512 (order: 2, 16384 bytes)
> UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
> NET: Registered protocol family 1
> pci 0000:01:00.0: Boot video device
> PCI: CLS 64 bytes, default 64
> Unpacking initramfs...
> -Freeing initrd memory: 16680k freed
> +Freeing initrd memory: 15656k freed
> Simple Boot Flag at 0x79 set to 0x1
> apm: BIOS not found.
> -Intel AES-NI instructions are not detected.
> audit: initializing netlink socket (disabled)
> -type=2000 audit(1333888166.549:1): initialized
> +type=2000 audit(1341168880.516:1): initialized
> highmem bounce pool size: 64 pages
> -HugeTLB registered 4 MB page size, pre-allocated 0 pages
> +HugeTLB registered 2 MB page size, pre-allocated 0 pages
> VFS: Disk quotas dquot_6.5.2
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> -msgmni has been set to 1676
> +msgmni has been set to 1660
> SELinux: Registering netfilter hooks
> alg: No test for stdrng (krng)
> NET: Registered protocol family 38
> @@ -626,14 +631,13 @@ pcieport 0000:00:1c.4: irq 43 for MSI/MS
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> -registered
> -vesafb: mode is 1024x768x32, linelength=4096, pages=0
> +acpiphp: Slot [1] registered
> +vesafb: mode is 1440x900x32, linelength=5760, pages=0
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> -vesafb: framebuffer at 0xf3000000, mapped to 0xf7c80000, using 3072k, total 3072k
> -Console: switching to colour frame buffer device 128x48
> +vesafb: framebuffer at 0xf3000000, mapped to 0xf7e80000, using 5120k, total 5120k
> +Console: switching to colour frame buffer device 180x56
> fb0: VESA VGA frame buffer device
> -intel_idle: MWAIT substates: 0x3122220
> intel_idle: does not run on family 6 model 23
> ACPI: AC Adapter [AC] (off-line)
> input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
> @@ -642,17 +646,15 @@ input: Power Button as /devices/LNXSYSTM
> ACPI: Power Button [PBTN]
> input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
> ACPI: Sleep Button [SBTN]
> +ACPI: Requesting acpi_cpufreq
> Monitor-Mwait will be used to enter C-1 state
> Monitor-Mwait will be used to enter C-2 state
> Monitor-Mwait will be used to enter C-3 state
> Marking TSC unstable due to TSC halts in idle
> ACPI: acpi_idle registered with cpuidle
> thermal LNXTHERM:00: registered as thermal_zone0
> -ACPI: Thermal Zone [THM] (32 C)
> +ACPI: Thermal Zone [THM] (53 C)
> GHES: HEST is not enabled!
> -isapnp: Scanning for PnP cards...
> -(battery present)
> -isapnp: No Plug & Play device found
> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> Non-volatile memory driver v1.3
> Linux agpgart interface v0.103
> @@ -662,6 +664,7 @@ ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
> ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
> ahci 0000:00:1f.2: setting latency timer to 64
> +ACPI: Battery Slot [BAT0] (battery present)
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> @@ -687,7 +690,7 @@ ehci_hcd 0000:00:1a.7: USB 2.0 started,
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> -usb usb1: Manufacturer: Linux 3.3.0-4.fc16.i686 ehci_hcd
> +usb usb1: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE ehci_hcd
> usb usb1: SerialNumber: 0000:00:1a.7
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 4 ports detected
> @@ -701,7 +704,7 @@ ehci_hcd 0000:00:1d.7: USB 2.0 started,
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: EHCI Host Controller
> -usb usb2: Manufacturer: Linux 3.3.0-4.fc16.i686 ehci_hcd
> +usb usb2: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE ehci_hcd
> usb usb2: SerialNumber: 0000:00:1d.7
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 6 ports detected
> @@ -714,7 +717,7 @@ uhci_hcd 0000:00:1a.0: irq 20, io base 0
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: UHCI Host Controller
> -usb usb3: Manufacturer: Linux 3.3.0-4.fc16.i686 uhci_hcd
> +usb usb3: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE uhci_hcd
> usb usb3: SerialNumber: 0000:00:1a.0
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> @@ -725,7 +728,7 @@ uhci_hcd 0000:00:1a.1: irq 21, io base 0
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: UHCI Host Controller
> -usb usb4: Manufacturer: Linux 3.3.0-4.fc16.i686 uhci_hcd
> +usb usb4: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE uhci_hcd
> usb usb4: SerialNumber: 0000:00:1a.1
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> @@ -736,7 +739,7 @@ uhci_hcd 0000:00:1d.0: irq 20, io base 0
> usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb5: Product: UHCI Host Controller
> -usb usb5: Manufacturer: Linux 3.3.0-4.fc16.i686 uhci_hcd
> +usb usb5: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE uhci_hcd
> usb usb5: SerialNumber: 0000:00:1d.0
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> @@ -747,7 +750,7 @@ uhci_hcd 0000:00:1d.1: irq 21, io base 0
> usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb6: Product: UHCI Host Controller
> -usb usb6: Manufacturer: Linux 3.3.0-4.fc16.i686 uhci_hcd
> +usb usb6: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE uhci_hcd
> usb usb6: SerialNumber: 0000:00:1d.1
> hub 6-0:1.0: USB hub found
> hub 6-0:1.0: 2 ports detected
> @@ -758,13 +761,13 @@ uhci_hcd 0000:00:1d.2: irq 22, io base 0
> usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb7: Product: UHCI Host Controller
> -usb usb7: Manufacturer: Linux 3.3.0-4.fc16.i686 uhci_hcd
> +usb usb7: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE uhci_hcd
> usb usb7: SerialNumber: 0000:00:1d.2
> hub 7-0:1.0: USB hub found
> hub 7-0:1.0: 2 ports detected
> usbcore: registered new interface driver usbserial
> -USB Serial support registered for generic
> usbcore: registered new interface driver usbserial_generic
> +USB Serial support registered for generic
> usbserial: USB Serial Driver core
> i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> @@ -781,7 +784,7 @@ EFI Variables Facility v0.08 2004-May-17
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> ip_tables: (C) 2000-2006 Netfilter Core Team
> -TCP cubic registered
> +TCP: cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 10
> Mobile IPv6
> @@ -790,56 +793,56 @@ Registering the dns_resolver key type
> Using IPI No-Shortcut mode
> PM: Hibernation image not present or could not be loaded.
> registered taskstats version 1
> - Magic number: 8:784:480
> -rtc_cmos 00:04: setting system clock to 2012-04-08 12:29:28 UTC (1333888168)
> + Magic number: 4:879:947
> +tty tty4: hash matches
> +rtc_cmos 00:04: setting system clock to 2012-07-01 18:54:41 UTC (1341168881)
> Initializing network drop monitor service
> input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
> ata4.00: ATAPI: Optiarc DVD+/-RW AD-7640A, JD05, max UDMA/33
> ata4.00: configured for UDMA/33
> ata3: SATA link down (SStatus 0 SControl 300)
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> -ata1.00: ATA-7: ST9200420ASG, 3.ADD, max UDMA/133
> -ata1.00: 390721968 sectors, multi 8: LBA48 NCQ (depth 31/32)
> +ata1.00: ATA-9: OCZ-VERTEX4, 1.3, max UDMA/133
> +ata1.00: 500118192 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
> ata1.00: configured for UDMA/133
> -scsi 0:0:0:0: Direct-Access ATA ST9200420ASG 3.AD PQ: 0 ANSI: 5
> +scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX4 1.3 PQ: 0 ANSI: 5
> +sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> -sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> scsi 3:0:0:0: CD-ROM Optiarc DVD+-RW AD-7640A JD05 PQ: 0 ANSI: 5
> + sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
> usb 1-1: new high-speed USB device number 2 using ehci_hcd
> +sd 0:0:0:0: [sda] Attached SCSI disk
> sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
> cdrom: Uniform CD-ROM driver Revision: 3.20
> sr 3:0:0:0: Attached scsi CD-ROM sr0
> sr 3:0:0:0: Attached scsi generic sg1 type 5
> - sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
> -sd 0:0:0:0: [sda] Attached SCSI disk
> -Freeing unused kernel memory: 620k freed
> -Write protecting the kernel text: 5340k
> -Write protecting the kernel read-only data: 2096k
> +Freeing unused kernel memory: 640k freed
> +Write protecting the kernel text: 5444k
> +Write protecting the kernel read-only data: 2140k
> +NX-protecting the kernel data: 4796k
> +dracut: dracut-018-40.git20120522.fc17
> usb 1-1: New USB device found, idVendor=05a9, idProduct=2640
> usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 1-1: Product: Laptop Integrated Webcam
> usb 1-1: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3
> -dracut: dracut-013-20.fc16
> dracut: rd.luks=0: removing cryptoluks activation
> -dracut: rd.lvm=0: removing LVM activation
> -udevd[111]: starting version 173
> -wmi: Mapper loaded
> +udevd[111]: starting version 182
> +[drm] Initialized drm 1.1.0 20060810
> acpi device:31: registered as cooling_device2
> input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input4
> ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
> -[drm] Initialized drm 1.1.0 20060810
> -VGA switcheroo: detected Optimus DSM method \ handle
> +wmi: Mapper loaded
> [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x084700a2)
> -checking generic (f3000000 300000) vs hw (e0000000 10000000)
> -checking generic (f3000000 300000) vs hw (f2000000 2000000)
> +checking generic (f3000000 500000) vs hw (e0000000 10000000)
> +checking generic (f3000000 500000) vs hw (f2000000 2000000)
> fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
> Console: switching to colour dummy device 80x25
> -[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
> -usb 2-2: new high-speed USB device number 3 using ehci_hcd
> +[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
> [drm] nouveau 0000:01:00.0: ... appears to be valid
> +[drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
> [drm] nouveau 0000:01:00.0: BIT BIOS found
> [drm] nouveau 0000:01:00.0: Bios version 60.84.5e.00
> [drm] nouveau 0000:01:00.0: TMDS table version 2.0
> @@ -859,27 +862,14 @@ usb 2-2: new high-speed USB device numbe
> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCB78
> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD5C8
> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD6BA
> -usb 2-2: New USB device found, idVendor=0bb4, idProduct=0c99
> -usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> -usb 2-2: Product: Android Phone
> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD8ED
> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD952
> -usb 2-2: Manufacturer: HTC
> -usb 2-2: SerialNumber: HT999L903452
> [drm] nouveau 0000:01:00.0: 0xD952: Condition still not met after 20ms, skipping following opcodes
> -Initializing USB Mass Storage driver...
> -scsi5 : usb-storage 2-2:1.0
> -[drm] nouveau 0000:01:00.0: 3 available performance level(s)
> -[drm] nouveau 0000:01:00.0: 0: core 169MHz shader 338MHz memory 100MHz timing 0 voltage 1150mV fanspeed 100%
> -[drm] nouveau 0000:01:00.0: 1: core 275MHz shader 550MHz memory 301MHz timing 1 voltage 1150mV fanspeed 100%
> -[drm] nouveau 0000:01:00.0: 2: core 475MHz shader 950MHz memory 702MHz timing 2 voltage 1200mV fanspeed 100%
> -[drm] nouveau 0000:01:00.0: c: core 275MHz shader 550MHz memory 302MHz voltage 1150mV
> -usbcore: registered new interface driver usb-storage
> -USB Mass Storage support registered.
> -[TTM] Zone kernel: Available graphics memory: 429556 kiB.
> -[TTM] Zone highmem: Available graphics memory: 1811164 kiB.
> -[TTM] Initializing pool allocator.
> -[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
> +[TTM] Zone kernel: Available graphics memory: 425282 kiB
> +[TTM] Zone highmem: Available graphics memory: 2068010 kiB
> +[TTM] Initializing pool allocator
> +[TTM] Initializing DMA pool allocator
> +[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (GDDR3)
> mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
> [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
> [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
> @@ -887,6 +877,11 @@ mtrr: type mismatch for e0000000,1000000
> [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [drm] No driver support for vblank timestamp query.
> [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
> +[drm] nouveau 0000:01:00.0: 3 available performance level(s)
> +[drm] nouveau 0000:01:00.0: 0: core 169MHz shader 338MHz memory 100MHz voltage 1150mV fanspeed 100%
> +[drm] nouveau 0000:01:00.0: 1: core 275MHz shader 550MHz memory 301MHz voltage 1150mV fanspeed 100%
> +[drm] nouveau 0000:01:00.0: 2: core 475MHz shader 950MHz memory 702MHz voltage 1200mV fanspeed 100%
> +[drm] nouveau 0000:01:00.0: c: core 275MHz shader 550MHz memory 302MHz voltage 1150mV
> input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5
> input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
> usb 3-2: new full-speed USB device number 2 using uhci_hcd
> @@ -903,66 +898,58 @@ input: A4Tech USB Full Speed as /devices
> generic-usb 0003:09DA:8090.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:1d.0-1/input0
> input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input8
> generic-usb 0003:09DA:8090.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:1d.0-1/input1
> -scsi 5:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
> -sd 5:0:0:0: Attached scsi generic sg2 type 0
> -sd 5:0:0:0: [sdb] Attached SCSI removable disk
> -usb 6-1: new full-speed USB device number 2 using uhci_hcd
> -usb 6-1: New USB device found, idVendor=054c, idProduct=03d5
> -usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> -usb 6-1: Product: Motion Controller
> -usb 6-1: Manufacturer: Sony Computer Entertainment
> -input: Sony Computer Entertainment Motion Controller as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input9
> -generic-usb 0003:054C:03D5.0003: input,hiddev0,hidraw2: USB HID v1.10 Gamepad [Sony Computer Entertainment Motion Controller] on usb-0000:00:1d.1-1/input0
> -composite sync not supported
> -[drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x320000, bo f28cf600
> -fbcon: nouveaufb (fb0) is primary device
> -Console: switching to colour frame buffer device 180x56
> -fb0: nouveaufb frame buffer device
> -drm: registered panic notifier
> -[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
> -dracut: Starting plymouth daemon
> usb 7-2: new full-speed USB device number 2 using uhci_hcd
> -composite sync not supported
> -dracut: rd.dm=0: removing DM RAID activation
> usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500
> usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 7-2: Product: BCM2045B2
> usb 7-2: Manufacturer: Broadcom
> -dracut: rd.md=0: removing MD RAID activation
> hub 7-2:1.0: USB hub found
> hub 7-2:1.0: 3 ports detected
> -sdhci: Secure Digital Host Controller Interface driver
> -sdhci: Copyright(c) Pierre Ossman
> -(rev 22)
> -Registered led device: mmc0::
> -using DMA
> -firewire_ohci: Added fw-ohci device 0000:03:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
> +composite sync not supported
> usb 7-2.2: new full-speed USB device number 3 using uhci_hcd
> +[drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x320000, bo f6c97e00
> +fbcon: nouveaufb (fb0) is primary device
> +Console: switching to colour frame buffer device 180x56
> +fb0: nouveaufb frame buffer device
> +drm: registered panic notifier
> +[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
> +dracut: Starting plymouth daemon
> usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502
> usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
> usb 7-2.2: Manufacturer: Broadcom Corp
> -input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input10
> -generic-usb 0003:0A5C:4502.0004: input,hidraw3: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0
> +input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input9
> +generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0
> +composite sync not supported
> usb 7-2.3: new full-speed USB device number 4 using uhci_hcd
> -firewire_core: created device fw0: GUID 334fc0001cece070, S400
> usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503
> usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0
> usb 7-2.3: Manufacturer: Broadcom Corp
> -input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input11
> -generic-usb 0003:0A5C:4503.0005: input,hidraw4: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0
> -EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
> -dracut: Checking ext4: /dev/disk/by-uuid/7417d839-a647-466e-b57d-fc65d20a6342
> -dracut: issuing e2fsck -a /dev/disk/by-uuid/7417d839-a647-466e-b57d-fc65d20a6342
> -dracut: _Fedora-16-i686-: clean, 238747/901120 files, 1776110/3584000 blocks
> -dracut: Remounting /dev/disk/by-uuid/7417d839-a647-466e-b57d-fc65d20a6342 with -o ro
> -EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
> -dracut: Mounted root filesystem /dev/sda7
> +input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input10
> +generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0
> +dracut: rd.dm=0: removing DM RAID activation
> +dracut: rd.md=0: removing MD RAID activation
> +sdhci: Secure Digital Host Controller Interface driver
> +sdhci: Copyright(c) Pierre Ossman
> +firewire_ohci 0000:03:09.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
> +sdhci-pci 0000:03:09.1: SDHCI controller found [1180:0822] (rev 22)
> +Registered led device: mmc0::
> +mmc0: SDHCI controller on PCI [0000:03:09.1] using DMA
> +EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
> +dracut: Checking ext4: /dev/disk/by-uuid/29c27e52-ab08-4c1a-9ed7-86ab260b207b
> +dracut: issuing e2fsck -a /dev/disk/by-uuid/29c27e52-ab08-4c1a-9ed7-86ab260b207b
> +dracut: /dev/disk/by-uuid/29c27e52-ab08-4c1a-9ed7-86ab260b207b: clean, 275331/983040 files, 2231118/3932160 blocks
> +dracut: Remounting /dev/disk/by-uuid/29c27e52-ab08-4c1a-9ed7-86ab260b207b with -o ro
> +EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
> +dracut: Mounted root filesystem /dev/sda6
> dracut: Switching root
> -type=1404 audit(1333888173.684:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
> -SELinux: 2048 avtab hash slots, 97362 rules.
> -SELinux: 2048 avtab hash slots, 97362 rules.
> -SELinux: 9 users, 13 roles, 3912 types, 215 bools, 1 sens, 1024 cats
> -SELinux: 82 classes, 97362 rules
> +type=1404 audit(1341168884.696:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
> +firewire_core 0000:03:09.0: created device fw0: GUID 334fc0001cece070, S400
> +SELinux: 2048 avtab hash slots, 100708 rules.
> +SELinux: 2048 avtab hash slots, 100708 rules.
> +SELinux: 9 users, 15 roles, 4148 types, 223 bools, 1 sens, 1024 cats
> +SELinux: 83 classes, 100708 rules
> +SELinux: Permission ptrace_child in class process not defined in policy.
> +SELinux: the above unknown classes and permissions will be allowed
> SELinux: Completing initialization.
> SELinux: Setting up existing superblocks.
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> @@ -979,18 +966,17 @@ SELinux: initialized (dev devpts, type d
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> -SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> -SELinux: initialized (dev sda7, type ext4), uses xattr
> -type=1403 audit(1333888173.953:3): policy loaded auid=4294967295 ses=4294967295
> -systemd[1]: Successfully loaded SELinux policy in 347ms 981us.
> -systemd[1]: Successfully loaded SELinux database in 54ms 927us, size on heap is 365K.
> +SELinux: initialized (dev sda6, type ext4), uses xattr
> +SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
> +type=1403 audit(1341168885.034:3): policy loaded auid=4294967295 ses=4294967295
> +systemd[1]: Successfully loaded SELinux policy in 354ms 350us.
> systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> -systemd[1]: Relabelled /dev and /run in 42ms 476us.
> +systemd[1]: Relabelled /dev and /run in 44ms 145us.
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> @@ -999,62 +985,51 @@ SELinux: initialized (dev cgroup, type c
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> -systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
> +systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
> systemd[1]: Set hostname to <xps>.
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> -udevd[521]: starting version 173
> -udevd[521]: specified group 'plugdev' unknown
> -SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> -SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
> -SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
> -EXT4-fs (sda7): re-mounted. Opts: (null)
> -RPC: Registered named UNIX socket transport module.
> -RPC: Registered udp transport module.
> -RPC: Registered tcp transport module.
> -RPC: Registered tcp NFSv4.1 backchannel transport module.
> -SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
> -SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
> +systemd-journald[309]: Fixed max_use=201.9M max_size=25.2M min_size=64.0K keep_free=100.9M
> +systemd-journald[309]: Vacuuming...
> +udevd[307]: starting version 182
> +EXT4-fs (sda6): re-mounted. Opts: (null)
> sky2: driver version 1.30
> sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
> sky2 0000:09:00.0: irq 45 for MSI/MSI-X
> sky2 0000:09:00.0: eth0: addr 00:21:9b:cd:55:50
> cfg80211: Calling CRDA to update world regulatory domain
> -iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
> -iwl3945: Copyright(c) 2003-2011 Intel Corporation
> -iwl3945 0000:0b:00.0: enabling device (0000 -> 0002)
> -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
> iTCO_vendor_support: vendor-support=0
> -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
> -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
> -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
> -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
> -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
> -iwl3945 0000:0b:00.0: bad EEPROM signature,EEPROM_GP=0x00000007
> -iwl3945 0000:0b:00.0: EEPROM not found, EEPROM_GP=0xffffffff
> -iwl3945 0000:0b:00.0: Unable to init EEPROM
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
> iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> -iwl3945: probe of 0000:0b:00.0 failed with error -2
> -microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
> +Linux media interface: v0.10
> +Linux video capture interface: v2.00
> +snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
> r592: driver successfully loaded
> -mtp-probe[674]: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1"
> -mtp-probe[724]: checking bus 7, device 3: "/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2"
> -mtp-probe[670]: checking bus 5, device 2: "/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-1"
> -mtp-probe[691]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2"
> -mtp-probe[684]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1"
> -mtp-probe[650]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2"
> -mtp-probe[730]: checking bus 7, device 4: "/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3"
> -mtp-probe[691]: bus: 2, device: 3 was not an MTP device
> -mtp-probe[724]: bus: 7, device: 3 was not an MTP device
> -mtp-probe[670]: bus: 5, device: 2 was not an MTP device
> -mtp-probe[684]: bus: 1, device: 2 was not an MTP device
> -mtp-probe[674]: bus: 6, device: 2 was not an MTP device
> -mtp-probe[730]: bus: 7, device: 4 was not an MTP device
> -mtp-probe[650]: bus: 3, device: 2 was not an MTP device
> +uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
> +input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input11
> +usbcore: registered new interface driver uvcvideo
> +USB Video Class driver (1.1.1)
> +ALSA sound/pci/hda/hda_codec.c:5099 autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
> +ALSA sound/pci/hda/hda_codec.c:5103 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> +ALSA sound/pci/hda/hda_codec.c:5107 hp_outs=2 (0xa/0xf/0x0/0x0/0x0)
> +ALSA sound/pci/hda/hda_codec.c:5108 mono: mono_out=0x0
> +ALSA sound/pci/hda/hda_codec.c:5111 dig-out=0x21/0x0
> +ALSA sound/pci/hda/hda_codec.c:5112 inputs:
> +ALSA sound/pci/hda/hda_codec.c:5116 Internal Mic=0xc
> +ALSA sound/pci/hda/hda_codec.c:5116 Mic=0xe
> +ALSA sound/pci/hda/hda_codec.c:5118
> +ALSA sound/pci/hda/patch_sigmatel.c:3111 stac92xx: dac_nids=2 (0x2/0x5/0x0/0x0/0x0)
> +iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
> +iwl3945: Copyright(c) 2003-2011 Intel Corporation
> +microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
> +iwl3945 0000:0b:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
> +iwl3945 0000:0b:00.0: Detected Intel Wireless WiFi Link 3945ABG
> +iwl3945 0000:0b:00.0: irq 47 for MSI/MSI-X
> +Registered led device: phy0-led
> +ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
> dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
> -r852: driver loaded successfully
> +input: Dell WMI hotkeys as /devices/virtual/input/input12
> cfg80211: World regulatory domain updated:
> cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> @@ -1062,103 +1037,54 @@ cfg80211: (2457000 KHz - 2482000 KHz @
> cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> +Adding 4930552k swap on /dev/sda8. Priority:0 extents:1 across:4930552k SS
> microcode: CPU0 updated to revision 0x60f, date = 2010-09-29
> microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
> +fuse init (API version 7.18)
> +udevd[326]: renamed network interface eth0 to p2p1
> microcode: CPU1 updated to revision 0x60f, date = 2010-09-29
> microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
> -Linux media interface: v0.10
> -Linux video capture interface: v2.00
> -input: Dell WMI hotkeys as /devices/virtual/input/input12
> -snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
> -uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
> -uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
> -input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input13
> -usbcore: registered new interface driver uvcvideo
> -USB Video Class driver (1.1.1)
> -ALSA sound/pci/hda/hda_codec.c:4927 autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
> -ALSA sound/pci/hda/hda_codec.c:4931 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> -ALSA sound/pci/hda/hda_codec.c:4935 hp_outs=2 (0xa/0xf/0x0/0x0/0x0)
> -ALSA sound/pci/hda/hda_codec.c:4936 mono: mono_out=0x0
> -ALSA sound/pci/hda/hda_codec.c:4939 dig-out=0x21/0x0
> -ALSA sound/pci/hda/hda_codec.c:4940 inputs:
> -ALSA sound/pci/hda/hda_codec.c:4944 Internal Mic=0xc
> -ALSA sound/pci/hda/hda_codec.c:4944 Mic=0xe
> -ALSA sound/pci/hda/hda_codec.c:4946
> -ALSA sound/pci/hda/patch_sigmatel.c:3090 stac92xx: dac_nids=2 (0x2/0x5/0x0/0x0/0x0)
> -udevd[609]: renamed network interface eth0 to p2p1
> -fuse init (API version 7.18)
> SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
> -mount[900]: mount: fusectl already mounted or /sys/fs/fuse/connections busy
> -mount[900]: mount: according to mtab, fusectl is already mounted on /sys/fs/fuse/connections
> -systemd[1]: sys-fs-fuse-connections.mount mount process exited, code=exited status=32
> -Adding 2047996k swap on /dev/sda8. Priority:0 extents:1 across:2047996k
> -systemd-fsck[893]: /dev/sda5: clean, 281/76304 files, 117477/304216 blocks
> -SELinux: initialized (dev sda3, type fuseblk), uses genfs_contexts
> -ntfs-3g[923]: Version 2011.4.12 integrated FUSE 27
> -ntfs-3g[923]: Mounted /dev/sda3 (Read-Write, label "", NTFS 3.1)
> -ntfs-3g[923]: Cmdline options: rw
> -ntfs-3g[923]: Mount options: rw,allow_other,nonempty,atime,fsname=/dev/sda3,blkdev,blksize=4096
> -ntfs-3g[923]: Ownership and permissions disabled, configuration type 1
> -fedora-storage-init[912]: Setting up Logical Volume Management: No volume groups found
> -fedora-storage-init[912]: [ OK ]
> +cfg80211: Calling CRDA for country: GB
> +cfg80211: Regulatory domain changed to country: GB
> +cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> +cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
> +cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
> +cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
> +cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
> +SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts
> EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
> SELinux: initialized (dev sda5, type ext4), uses xattr
> -fedora-storage-init[925]: Setting up Logical Volume Management: No volume groups found
> -fedora-storage-init[925]: [ OK ]
> -systemd-fsck[903]: /home: clean, 1056585/5799936 files, 19080578/23175424 blocks
> -lvm[935]: No volume groups found
> -EXT4-fs (sda6): mounting ext3 file system using the ext4 subsystem
> -EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
> -SELinux: initialized (dev sda6, type ext3), uses xattr
> -EXT4-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended
> -EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
> -SELinux: initialized (dev sda9, type ext4), uses xattr
> -systemd-tmpfiles[951]: Successfully loaded SELinux database in 13ms 399us, size on heap is 366K.
> +EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
> +SELinux: initialized (dev sda7, type ext4), uses xattr
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> -auditd[965]: Started dispatcher: /sbin/audispd pid: 990
> -iptables.init[959]: iptables: Applying firewall rules: [ OK ]
> -audispd[990]: priority_boost_parser called with: 4
> -audispd[990]: max_restarts_parser called with: 10
> -audispd[990]: audispd initialized with q_depth=120 and 1 active plugins
> -ip6_tables: (C) 2000-2006 Netfilter Core Team
> -ip6tables.init[960]: ip6tables: Applying firewall rules: [ OK ]
> -NetworkManager[1003]: <info> NetworkManager (version 0.9.2-1.fc16) is starting...
> -NetworkManager[1003]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
> -NetworkManager[1003]: NetworkManager[1003]: <info> NetworkManager (version 0.9.2-1.fc16) is starting...
> -NetworkManager[1003]: NetworkManager[1003]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
> -mcelog[996]: mcelog read: No such device
> -auditctl[973]: No rules
> -auditctl[973]: AUDIT_STATUS: enabled=0 flag=1 pid=965 rate_limit=0 backlog_limit=320 lost=0 backlog=0
> -abrtd[1011]: Init complete, entering main loop
> -acpid[1026]: starting up with netlink and the input layer
> -acpid[1026]: skipping incomplete file /etc/acpi/events/videoconf
> -acpid[1026]: 1 rule loaded
> -acpid[1026]: waiting for events: event logging is off
> -avahi-daemon[1025]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
> -avahi-daemon[1025]: Successfully dropped root privileges.
> -avahi-daemon[1025]: avahi-daemon 0.6.30 starting up.
> -auditd[965]: Init complete, auditd 2.1.3 listening for events (startup state enable)
> -Loading iSCSI transport class v2.0-870.
> -iscsi: registered transport (tcp)
> -iscsi: registered transport (iser)
> -libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
> -libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
> -Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
> -iscsi: registered transport (cxgb3i)
> -Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
> -iscsi: registered transport (cxgb4i)
> -cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.8 (Jan 3, 2012)
> -Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Jun 15, 2011)
> -iscsi: registered transport (bnx2i)
> -iscsi: registered transport (be2iscsi)
> sky2 0000:09:00.0: p2p1: enabling interface
> ADDRCONF(NETDEV_UP): p2p1: link is not ready
> -8021q: 802.1Q VLAN Support v1.8
> -netlink: 12 bytes leftover after parsing attributes.
> -netlink: 12 bytes leftover after parsing attributes.
> -netlink: 12 bytes leftover after parsing attributes.
> +RPC: Registered named UNIX socket transport module.
> +RPC: Registered udp transport module.
> +RPC: Registered tcp transport module.
> +RPC: Registered tcp NFSv4.1 backchannel transport module.
> +iwl3945 0000:0b:00.0: loaded firmware version 15.32.2.9
> +Bluetooth: Core ver 2.16
> +NET: Registered protocol family 31
> +Bluetooth: HCI device and connection manager initialized
> +Bluetooth: HCI socket layer initialized
> +Bluetooth: L2CAP socket layer initialized
> +Bluetooth: SCO socket layer initialized
> +Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> +Bluetooth: BNEP filters: protocol multicast
> +ADDRCONF(NETDEV_UP): wlan0: link is not ready
> +ip6_tables: (C) 2000-2006 Netfilter Core Team
> composite sync not supported
> composite sync not supported
> +SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
> composite sync not supported
> +wlan0: authenticate with 80:b6:86:6b:2f:d8
> +wlan0: send auth to 80:b6:86:6b:2f:d8 (try 1/3)
> +wlan0: authenticated
> +wlan0: associate with 80:b6:86:6b:2f:d8 (try 1/3)
> +wlan0: RX AssocResp from 80:b6:86:6b:2f:d8 (capab=0x411 status=0 aid=2)
> +wlan0: associated
> +ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> composite sync not supported
> -hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
> +wlan0: no IPv6 routers present
>

Attachment: iwl3945_kernel-3.4.3_noPAE.tar.gz.tar.gz
Description: GNU Zip compressed data

Next message: Thierry Reding: "Re: [PATCH v2 1/3] pwm: Convert pwm-imx to use devm_* APIs"
Previous message: Thierry Reding: "Re: [PATCH v2 3/3] pwm: Convert pwm-vt8500 to use devm_* APIs"
In reply to: Stanislaw Gruszka: "Re: Initializing iwl3945 error"
Next in thread: Bjorn Helgaas: "Re: Initializing iwl3945 error"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]