Re: [PATCH] PCI / PM: Restore the original behavior of pci_set_power_state()

From: Bjorn Helgaas
Date: Thu Jul 05 2012 - 17:30:26 EST


On Thu, Jun 28, 2012 at 4:01 AM, Rafael J. Wysocki <rjw@xxxxxxx> wrote:
> From: Rafael J. Wysocki <rjw@xxxxxxx>
>
> Commit cc2893b6 (PCI: Ensure we re-enable devices on resume)
> addressed the problem with USB not being powered after resume on
> recent Lenovo machines, but it did that in a suboptimal way.
> Namely, it should have changed the relevant code paths only,
> which are pci_pm_resume_noirq() and pci_pm_restore_noirq() supposed
> to restore the device's power and standard configuration registers
> after system resume from suspend or hibernation. Instead, however,
> it modified pci_set_power_state() which is executed in several
> other situations too. That resulted in some undesirable effects,
> like attempting to change a device's power state in the same way
> multiple times in a row (up to as many as 4 times in a row in the
> snd_hda_intel driver).
>
> Fix the bug addressed by commit cc2893b6 in an alternative way,
> by forcibly powering up all devices in pci_pm_default_resume_early(),
> which is called by pci_pm_resume_noirq() and pci_pm_restore_noirq()
> to restore the device's power and standard configuration registers,
> and modifying pci_pm_runtime_resume() to avoid the forcible power-up
> if not necessary. Then, revert the changes made by commit cc2893b6
> to make the confusion introduced by it go away.
>
> Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx>
> ---
> drivers/pci/pci-driver.c | 14 ++++++++------
> drivers/pci/pci.c | 19 ++++++++++++++++++-
> drivers/pci/pci.h | 1 +
> 3 files changed, 27 insertions(+), 7 deletions(-)
>
> Index: linux/drivers/pci/pci.c
> ===================================================================
> --- linux.orig/drivers/pci/pci.c
> +++ linux/drivers/pci/pci.c
> @@ -662,6 +662,19 @@ void pci_update_current_state(struct pci
> }
>
> /**
> + * pci_power_up - Put the given device into D0 forcibly
> + * @dev: PCI device to power up
> + */
> +void pci_power_up(struct pci_dev *dev)
> +{
> + if (platform_pci_power_manageable(dev))
> + platform_pci_set_power_state(dev, PCI_D0);
> +
> + pci_raw_set_power_state(dev, PCI_D0);
> + pci_update_current_state(dev, PCI_D0);
> +}
> +
> +/**
> * pci_platform_power_transition - Use platform to change device power state
> * @dev: PCI device to handle.
> * @state: State to put the device into.
> @@ -707,7 +720,7 @@ static void __pci_start_power_transition
> */
> int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
> {
> - return state >= PCI_D0 ?
> + return state > PCI_D0 ?
> pci_platform_power_transition(dev, state) : -EINVAL;

This hunk conflicted with Huang's D3_COLD patches. I fixed it up; can
you check and make sure I did it correctly?

I pushed the resolution to here:
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git on the
pci/rafael-pci_set_power_state-rebase branch.

Bjorn

> }
> EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
> @@ -744,6 +757,10 @@ int pci_set_power_state(struct pci_dev *
> */
> return 0;
>
> + /* Check if we're already there */
> + if (dev->current_state == state)
> + return 0;
> +
> __pci_start_power_transition(dev, state);
>
> /* This device is quirked not to be put into D3, so
> Index: linux/drivers/pci/pci-driver.c
> ===================================================================
> --- linux.orig/drivers/pci/pci-driver.c
> +++ linux/drivers/pci/pci-driver.c
> @@ -459,16 +459,17 @@ static int pci_restore_standard_config(s
> return 0;
> }
>
> +#endif
> +
> +#ifdef CONFIG_PM_SLEEP
> +
> static void pci_pm_default_resume_early(struct pci_dev *pci_dev)
> {
> - pci_restore_standard_config(pci_dev);
> + pci_power_up(pci_dev);
> + pci_restore_state(pci_dev);
> pci_fixup_device(pci_fixup_resume_early, pci_dev);
> }
>
> -#endif
> -
> -#ifdef CONFIG_PM_SLEEP
> -
> /*
> * Default "suspend" method for devices that have no driver provided suspend,
> * or not even a driver at all (second part).
> @@ -1050,7 +1051,8 @@ static int pci_pm_runtime_resume(struct
> if (!pm || !pm->runtime_resume)
> return -ENOSYS;
>
> - pci_pm_default_resume_early(pci_dev);
> + pci_restore_standard_config(pci_dev);
> + pci_fixup_device(pci_fixup_resume_early, pci_dev);
> __pci_enable_wake(pci_dev, PCI_D0, true, false);
> pci_fixup_device(pci_fixup_resume, pci_dev);
>
> Index: linux/drivers/pci/pci.h
> ===================================================================
> --- linux.orig/drivers/pci/pci.h
> +++ linux/drivers/pci/pci.h
> @@ -67,6 +67,7 @@ struct pci_platform_pm_ops {
>
> extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops);
> extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state);
> +extern void pci_power_up(struct pci_dev *dev);
> extern void pci_disable_enabled_device(struct pci_dev *dev);
> extern int pci_finish_runtime_suspend(struct pci_dev *dev);
> extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/