[RFC][PATCH V2 3/3] tegra: add pwm backlight device tree nodes

From: Alexandre Courbot
Date: Mon Jul 09 2012 - 02:07:39 EST


Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra20-ventana.dts | 31 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/tegra20.dtsi | 2 +-
2 files changed, 32 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index be90544..c67d9e1 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -317,6 +317,37 @@
bus-width = <8>;
};

+ backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
+ default-brightness-level = <12>;
+
+ pwms = <&pwm 2 5000000>;
+ pwm-names = "backlight";
+ power-supply = <&backlight_reg>;
+ enable-gpios = <&gpio 28 0>;
+
+ power-on-sequence = "REGULATOR", "power", <1>,
+ "DELAY", <10>,
+ "PWM", "backlight", <1>,
+ "GPIO", "enable", <1>;
+ power-off-sequence = "GPIO", "enable", <0>,
+ "PWM", "backlight", <0>,
+ "DELAY", <10>,
+ "REGULATOR", "power", <0>;
+ };
+
+ backlight_reg: fixedregulator@176 {
+ compatible = "regulator-fixed";
+ regulator-name = "backlight_regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio 176 0>;
+ startup-delay-us = <0>;
+ enable-active-high;
+ regulator-boot-off;
+ };
+
sound {
compatible = "nvidia,tegra-audio-wm8903-ventana",
"nvidia,tegra-audio-wm8903";
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 405d167..67a6cd9 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -123,7 +123,7 @@
status = "disabled";
};

- pwm {
+ pwm: pwm {
compatible = "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
--
1.7.11.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/