[PATCH 2/2] regulator: tps6586x: add support for input supply
From: Laxman Dewangan
Date: Fri Jul 13 2012 - 09:59:17 EST
There is multiple voltage input pins on device which
takes the voltage input for different voltage regulator.
Support to configure the voltage input supplied by
different regulator for each regulators.
Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
---
.../devicetree/bindings/regulator/tps6586x.txt | 17 +++++++
drivers/regulator/tps6586x-regulator.c | 47 ++++++++++---------
2 files changed, 42 insertions(+), 22 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt
index ab17ef6..d156e1b 100644
--- a/Documentation/devicetree/bindings/regulator/tps6586x.txt
+++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt
@@ -9,6 +9,14 @@ Required properties:
- regulators: list of regulators provided by this controller, must have
property "regulator-compatible" to match their hardware counterparts:
sm[0-2], ldo[0-9] and ldo_rtc
+- sm0-supply: The input supply for the SM0.
+- sm1-supply: The input supply for the SM1.
+- sm2-supply: The input supply for the SM2.
+- vinldo01-supply: The input supply for the LDO1 and LDO2
+- vinldo23-supply: The input supply for the LDO2 and LDO3
+- vinldo4-supply: The input supply for the LDO4
+- vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8
+- vinldo9-supply: The input supply for the LDO9
Each regulator is defined using the standard binding for regulators.
@@ -22,6 +30,15 @@ Example:
#gpio-cells = <2>;
gpio-controller;
+ sm0-supply = <&some_reg>;
+ sm1-supply = <&some_reg>;
+ sm2-supply = <&some_reg>;
+ vinldo01-supply = <...>;
+ vinldo23-supply = <...>;
+ vinldo4-supply = <...>;
+ vinldo678-supply = <...>;
+ vinldo9-supply = <...>;
+
regulators {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index c0ac241..e6da90a 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -70,7 +70,7 @@ struct tps6586x_regulator {
static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev)
{
- return rdev_get_dev(rdev)->parent->parent;
+ return rdev_get_dev(rdev)->parent;
}
static int tps6586x_set_voltage_sel(struct regulator_dev *rdev,
@@ -191,9 +191,10 @@ static const unsigned int tps6586x_dvm_voltages[] = {
1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
};
-#define TPS6586X_REGULATOR(_id, vdata, vreg, shift, nbits, \
+#define TPS6586X_REGULATOR(_id, _pin_name, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
.desc = { \
+ .supply_name = _pin_name, \
.name = "REG-" #_id, \
.ops = &tps6586x_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
@@ -214,37 +215,39 @@ static const unsigned int tps6586x_dvm_voltages[] = {
.go_reg = TPS6586X_##goreg, \
.go_bit = (gobit),
-#define TPS6586X_LDO(_id, vdata, vreg, shift, nbits, \
+#define TPS6586X_LDO(_id, _pname, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
{ \
- TPS6586X_REGULATOR(_id, vdata, vreg, shift, nbits, \
+ TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
}
-#define TPS6586X_DVM(_id, vdata, vreg, shift, nbits, \
+#define TPS6586X_DVM(_id, _pname, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
{ \
- TPS6586X_REGULATOR(_id, vdata, vreg, shift, nbits, \
+ TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
}
static struct tps6586x_regulator tps6586x_regulator[] = {
- TPS6586X_LDO(LDO_0, ldo0, SUPPLYV1, 5, 3, ENC, 0, END, 0),
- TPS6586X_LDO(LDO_3, ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2),
- TPS6586X_LDO(LDO_5, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
- TPS6586X_LDO(LDO_6, ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
- TPS6586X_LDO(LDO_7, ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5),
- TPS6586X_LDO(LDO_8, ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6),
- TPS6586X_LDO(LDO_9, ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7),
- TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
- TPS6586X_LDO(LDO_1, dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1),
- TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
-
- TPS6586X_DVM(LDO_2, dvm, LDO2BV1, 0, 5, ENA, 3, ENB, 3, VCC2, 6),
- TPS6586X_DVM(LDO_4, ldo4, LDO4V1, 0, 5, ENC, 3, END, 3, VCC1, 6),
- TPS6586X_DVM(SM_0, dvm, SM0V1, 0, 5, ENA, 1, ENB, 1, VCC1, 2),
- TPS6586X_DVM(SM_1, dvm, SM1V1, 0, 5, ENA, 0, ENB, 0, VCC1, 0),
+ TPS6586X_LDO(LDO_0, "vinldo01", ldo0, SUPPLYV1, 5, 3, ENC, 0, END, 0),
+ TPS6586X_LDO(LDO_3, "vinldo23", ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2),
+ TPS6586X_LDO(LDO_5, NULL, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
+ TPS6586X_LDO(LDO_6, "vinldo678", ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
+ TPS6586X_LDO(LDO_7, "vinldo678", ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5),
+ TPS6586X_LDO(LDO_8, "vinldo678", ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6),
+ TPS6586X_LDO(LDO_9, "vinldo9", ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7),
+ TPS6586X_LDO(LDO_RTC, NULL, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
+ TPS6586X_LDO(LDO_1, "vinldo01", dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1),
+ TPS6586X_LDO(SM_2, "sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
+
+ TPS6586X_DVM(LDO_2, "vinldo23", dvm, LDO2BV1, 0, 5, ENA, 3,
+ ENB, 3, VCC2, 6),
+ TPS6586X_DVM(LDO_4, "vinldo4", ldo4, LDO4V1, 0, 5, ENC, 3,
+ END, 3, VCC1, 6),
+ TPS6586X_DVM(SM_0, "sm0", dvm, SM0V1, 0, 5, ENA, 1, ENB, 1, VCC1, 2),
+ TPS6586X_DVM(SM_1, "sm1", dvm, SM1V1, 0, 5, ENA, 0, ENB, 0, VCC1, 0),
};
/*
@@ -351,7 +354,7 @@ static int __devinit tps6586x_regulator_probe(struct platform_device *pdev)
if (err)
return err;
- config.dev = &pdev->dev;
+ config.dev = pdev->dev.parent;
config.of_node = pdev->dev.of_node;
config.init_data = pdev->dev.platform_data;
config.driver_data = ri;
--
1.7.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/