Re: [PATCH] i2c: sis964: bus driver
From: Amaury Decrême
Date: Sat Jul 14 2012 - 03:53:25 EST
(sorry for the spam, I needed to resend in text format...)
Hello,
You're right. In fact, I was thinking of add code in drivers/pci/quirk.c to unhide the SMBus for users who maybe needed it with the following code:
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1389,6 +1389,24 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_si
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus);
+
+/*
+ * SiS 964 south bridge: BIOS typically hides SMBus device...
+ */
+static void quirk_sis_964_smbus(struct pci_dev *dev)
+{
+ u8 val = 0;
+ pci_read_config_byte(dev, 0x76, &val);
+ if (!(val & 0x01)) {
+ dev_info(&dev->dev, "Enabling SiS 964 SMBus\n");
+ pci_write_config_byte(dev, 0x76, val | 0x01);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_964,
+ quirk_sis_964_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_964,
+ quirk_sis_964_smbus);
Still, I'm not quite sure if it is needed.
Thanks for the comments.
Le 13 juil. 2012 à 17:36, Bjorn Helgaas a écrit :
> On Fri, Jul 13, 2012 at 3:40 AM, Amaury Decrême
> <amaury.decreme@xxxxxxxxx> wrote:
>> This patch is a driver for SiS964 I2C bus.
>>
>> It was forked from i2c-sis630 and modified with SiS datasheets.
>>
>> Tested with kmemleak.
>>
>> Signed-off-by: Amaury Decrême <amaury.decreme@xxxxxxxxx>
>> ---
>> Documentation/i2c/busses/i2c-sis964 | 34 ++
>> MAINTAINERS | 16 +
>> drivers/i2c/busses/Kconfig | 12 +-
>> drivers/i2c/busses/Makefile | 1 +
>> drivers/i2c/busses/i2c-sis964.c | 575 +++++++++++++++++++++++++++++++++++
>> include/linux/pci_ids.h | 1 +
>> 6 files changed, 638 insertions(+), 1 deletions(-)
>> create mode 100644 Documentation/i2c/busses/i2c-sis964
>> create mode 100644 drivers/i2c/busses/i2c-sis964.c
>>
>> diff --git a/Documentation/i2c/busses/i2c-sis964 b/Documentation/i2c/busses/i2c-sis964
>> new file mode 100644
>> index 0000000..a831f1a
>> --- /dev/null
>> +++ b/Documentation/i2c/busses/i2c-sis964
>> @@ -0,0 +1,34 @@
>> +Kernel driver i2c-sis964
>> +
>> +Supported adapters:
>> + * Silicon Integrated Systems Corp (SiS)
>> + 964 chipset (Datasheet by SiS)
>> + * Possible other SiS chipsets with the same registers and clocks
>> +
>> +Author: Amaury Decrême <amaury.decreme@xxxxxxxxx>
>> +
>> +Module Parameters
>> +-----------------
>> +
>> +* force = [1|0] Forcibly enable the SIS964. DANGEROUS!
>> + This can be interesting for chipsets not named
>> + above to check if it works for you chipset,
>> + but DANGEROUS!
>> +
>> +* low_clock = [1|0] 1 = Set Host Master Clock to 28KHz (defaut 56Khz)
>> +
>> +Description
>> +-----------
>> +
>> +This SMBus driver is known to work on motherboards with the SiS964 chipset.
>> +
>> +If you see something like this:
>> +
>> +00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO]
>> +
>> +in your 'lspci' output , then this driver is for your chipset.
>> +
>> +Thank You
>> +---------
>> +Alexander Malysh <amalysh@xxxxxx>
>> +- Who has written i2c-sis630, from which i2c-sis964 is forked
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index eb22272..4a11805 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -6179,6 +6179,22 @@ S: Maintained
>> F: Documentation/i2c/busses/i2c-sis96x
>> F: drivers/i2c/busses/i2c-sis96x.c
>>
>> +SIS 964 I2C/SMBUS DRIVER
>> +M: "Amaury Decrême" <amaury.decreme@xxxxxxxxx>
>> +L: linux-i2c@xxxxxxxxxxxxxxx
>> +S: Maintained
>> +F: Documentation/i2c/busses/i2c-sis96i4
>> +F: drivers/i2c/busses/i2c-sis964.c
>> +
>> +SIS FRAMEBUFFER DRIVER
>> +M: Thomas Winischhofer <thomas@xxxxxxxxxxxxxxxx>
>> +W: http://www.winischhofer.net/linuxsisvga.shtml
>> +S: Maintained
>> +F: Documentation/fb/sisfb.txt
>> +F: drivers/video/sis/
>> +F: include/video/sisfb.h
>> +
>> +SIS USB2VGA DRIVER
>> SIS FRAMEBUFFER DRIVER
>> M: Thomas Winischhofer <thomas@xxxxxxxxxxxxxxxx>
>> W: http://www.winischhofer.net/linuxsisvga.shtml
>> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
>> index 7244c8b..8dc9f90 100644
>> --- a/drivers/i2c/busses/Kconfig
>> +++ b/drivers/i2c/busses/Kconfig
>> @@ -189,8 +189,18 @@ config I2C_SIS630
>> This driver can also be built as a module. If so, the module
>> will be called i2c-sis630.
>>
>> +config I2C_SIS964
>> + tristate "SiS 964"
>> + depends on PCI && EXPERIMENTAL
>> + help
>> + If you say yes to this option, support will be included for the SiS
>> + 964 SMBus (a subset of I2C) interfaces.
>> +
>> + This driver can also be built as a module. If so, the module
>> + will be called i2c-sis964.
>> +
>> config I2C_SIS96X
>> - tristate "SiS 96x"
>> + tristate "SiS 96x (but SiS964)"
>> depends on PCI
>> help
>> If you say yes to this option, support will be included for the SiS
>> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
>> index ce3c2be..b985bc8 100644
>> --- a/drivers/i2c/busses/Makefile
>> +++ b/drivers/i2c/busses/Makefile
>> @@ -19,6 +19,7 @@ obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o
>> obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
>> obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o
>> obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
>> +obj-$(CONFIG_I2C_SIS964) += i2c-sis964.o
>> obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o
>> obj-$(CONFIG_I2C_VIA) += i2c-via.o
>> obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
>> diff --git a/drivers/i2c/busses/i2c-sis964.c b/drivers/i2c/busses/i2c-sis964.c
>> new file mode 100644
>> index 0000000..9f4ed14
>> --- /dev/null
>> +++ b/drivers/i2c/busses/i2c-sis964.c
>> @@ -0,0 +1,575 @@
>> +/*
>> + Copyright (c) 2012 Amaury Decrême <amaury.decreme@xxxxxxxxx>
>> +
>> + This program is free software; you can redistribute it and/or modify
>> + it under the terms of the GNU General Public License as published by
>> + the Free Software Foundation; either version 2 of the License, or
>> + (at your option) any later version.
>> +
>> + This program is distributed in the hope that it will be useful,
>> + but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + GNU General Public License for more details.
>> +
>> + You should have received a copy of the GNU General Public License
>> + along with this program; if not, write to the Free Software
>> + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>> +*/
>> +
>> +/*
>> + Changes:
>> + 11.08.2011
>> + Fork of original i2c-sis630 - Alexander Malysh <amalysh@xxxxxx>
>> + Adapted for SiS964 with datasheets
>> + - Amaury Decrême <amaury.decreme@xxxxxxxxx>
>> +*/
>> +
>> +/*
>> + Supports:
>> + SIS 964
>> +
>> + Note: we assume there can only be one device, with one SMBus interface.
>> +*/
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/delay.h>
>> +#include <linux/pci.h>
>> +#include <linux/ioport.h>
>> +#include <linux/init.h>
>> +#include <linux/i2c.h>
>> +#include <linux/acpi.h>
>> +#include <linux/io.h>
>> +
>> +/* SIS964 SMBus registers */
>> +#define SMB_STS 0xE0 /* status */
>> +#define SMB_EN 0xE1 /* status enable */
>> +#define SMB_CNT 0xE2 /* Control */
>> +#define SMBHOST_CNT 0xE3 /* Host Control */
>> +#define SMB_ADDR 0xE4 /* Address */
>> +#define SMB_CMD 0xE5 /* Command */
>> +#define SMB_PERRCHK 0xE6 /* Packet Error Check */
>> +#define SMB_COUNT 0xE7 /* Byte Count */
>> +#define SMB_BYTE 0xE8 /* ~0x8F data byte field */
>> +#define SMBDEV_ADDR 0xF0 /* Device Address */
>> +#define SMB_DB0 0xF1 /* Device byte0 */
>> +#define SMB_DB1 0xF2 /* Device byte1 */
>> +#define SMB_SAA 0xF3 /* Host slave alias address */
>> +#define SMB_PCOUNT 0xF4 /* processed byte count */
>> +
>> +
>> +/* SMB_STS register */
>> +#define SMBALT_STS 0x80 /* Slave alert */
>> +#define BYTE_DONE_STS 0x10 /* Byte Done Status / Block Array */
>> +#define SMBMAS_STS 0x08 /* Host Master */
>> +#define SMBCOL_STS 0x04 /* Collision */
>> +#define SMBERR_STS 0x02 /* Device error */
>> +
>> +/* SMB_CNT register */
>> +#define SMBCLK_SEL 0x20 /* Host master clock selection */
>> +#define SMB_PROBE 0x02 /* Bus Probe */
>> +#define SMB_HOSTBUSY 0x01 /* Host Busy */
>> +
>> +/* SMBHOST_CNT register */
>> +#define SMB_KILL 0x20 /* Kill */
>> +#define SMB_START 0x10 /* Start */
>> +#define SMB_PTL 0x07 /* Command Protocol */
>> +
>> +
>> +/* SMB_ADDR register */
>> +#define SMB_ADDRESS 0xFE /* Adress */
>> +#define SMB_RW 0x01 /* Read/Write */
>> +
>> +
>> +/* SMB_BYTE register */
>> +#define SMB_BYTE0 0xFF /* Byte 0 */
>> +#define SMB_BYTE1 0xFF00 /* Byte 1 */
>> +
>> +/* register count for request_region */
>> +#define SIS964_SMB_IOREGION 21
>> +
>> +/* PCI address constants */
>> +/* acpi base address register */
>> +#define SIS964_ACPI_BASE_REG 0x74
>> +/* bios control register */
>> +#define SIS964_BIOS_CTL_REG 0x40
>> +
>> +/* Other settings */
>> +#define MAX_TIMEOUT 500
>> +
>> +/* SIS964 constants */
>> +#define SIS964_QUICK 0x00
>> +#define SIS964_BYTE 0x01
>> +#define SIS964_BYTE_DATA 0x02
>> +#define SIS964_WORD_DATA 0x03
>> +#define SIS964_PCALL 0x04
>> +#define SIS964_BLOCK_DATA 0x05
>> +
>> +static struct pci_driver sis964_driver;
>> +
>> +/* insmod parameters */
>> +static bool low_clock;
>> +static bool force;
>> +module_param(low_clock, bool, 0);
>> +MODULE_PARM_DESC(low_clock, "Set Host Master Clock to 28KHz (default 56KHz).");
>> +module_param(force, bool, 0);
>> +MODULE_PARM_DESC(force, "Forcibly enable the SIS964. DANGEROUS!");
>> +
>> +/* acpi base address */
>> +static unsigned short acpi_base;
>> +
>> +/* supported chips */
>> +static int supported[] = {
>> + PCI_DEVICE_ID_SI_964,
>> + 0 /* terminates the list */
>> +};
>> +
>> +static inline u8 sis964_read(u8 reg)
>> +{
>> + return inb(acpi_base + reg);
>> +}
>> +
>> +static inline void sis964_write(u8 reg, u8 data)
>> +{
>> + outb(data, acpi_base + reg);
>> +}
>> +
>> +static int sis964_transaction_start(struct i2c_adapter *adap,
>> + int ptl, u8 *oldclock)
>> +{
>> + int tmp = 0;
>> +
>> + /* Clear status register */
>> + sis964_write(SMB_STS, 0xFF);
>> +
>> + /* Make sure the SMBus host is ready to start transmitting. */
>> + tmp = sis964_read(SMB_CNT);
>> + if (tmp & (SMB_PROBE | SMB_HOSTBUSY)) {
>> + dev_dbg(&adap->dev,
>> + "Bus busy (status 0x%02x). Killing transaction.\n",
>> + tmp);
>> +
>> + sis964_write(SMBHOST_CNT, SMB_KILL);
>> +
>> + return -EBUSY;
>> + }
>> +
>> + /* Set Host Master Clock to 28KHz if requested */
>> + if (low_clock) {
>> + *oldclock = sis964_read(SMB_CNT);
>> + sis964_write(SMB_CNT, SMBCLK_SEL);
>> + }
>> +
>> + /* start the transaction by setting bit start and protocol */
>> + sis964_write(SMBHOST_CNT, SMB_START | (ptl & SMB_PTL));
>> +
>> + return 0;
>> +}
>> +
>> +static int sis964_transaction_wait(struct i2c_adapter *adap, int ptl)
>> +{
>> + int tmp = 0, timeout = 0;
>> +
>> + /* Wait 30us, valid for 28Khz and 56Khz */
>> + udelay(30);
>> +
>> + tmp = sis964_read(SMB_STS);
>> + if (!(tmp & SMB_PROBE) && (tmp & SMB_HOSTBUSY)) {
>> + dev_dbg(&adap->dev,
>> + "Host busy (status 0x%02x). Restarting transaction.\n",
>> + tmp);
>> + sis964_write(SMBHOST_CNT, SMB_KILL);
>> + return -EAGAIN;
>> + }
>> +
>> + while (!(ptl == SIS964_BLOCK_DATA && (tmp & BYTE_DONE_STS))
>> + && !(tmp & (SMBMAS_STS | SMBCOL_STS | SMBERR_STS))
>> + && (timeout++ < MAX_TIMEOUT)) {
>> +
>> + /* Datasheets: wait 4ms max at 28Khz and
>> + * 2ms max at 56Khz for 8 bytes */
>> + if (low_clock)
>> + udelay(4000);
>> + else
>> + udelay(2000);
>> + tmp = sis964_read(SMB_STS);
>> + }
>> +
>> + /* If the SMBus is still busy, we give up */
>> + if (timeout > MAX_TIMEOUT) {
>> + dev_dbg(&adap->dev,
>> + "Bus Timeout (status 0x%02x)!\n", tmp);
>> + return -ETIMEDOUT;
>> + }
>> +
>> + if (tmp & SMBERR_STS) {
>> + dev_dbg(&adap->dev,
>> + "Failed bus transaction (status 0x%02x)!\n", tmp);
>> + return -ENXIO;
>> + }
>> +
>> + if (tmp & SMBCOL_STS) {
>> + dev_err(&adap->dev,
>> + "Bus collision (status 0x%02x)!\n", tmp);
>> + sis964_write(SMB_STS, tmp & ~SMBCOL_STS);
>> + return -EAGAIN;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void sis964_transaction_end(u8 oldclock)
>> +{
>> + /* clear all status "sticky" bits */
>> + sis964_write(SMB_STS, 0xFF);
>> +
>> + /* restore old Host Master Clock if low_clock is set */
>> + if (low_clock)
>> + sis964_write(SMB_CNT, oldclock & SMBCLK_SEL);
>> +}
>> +
>> +static int sis964_transaction(struct i2c_adapter *adap, int ptl)
>> +{
>> + int tmp = 0, timeout = 0;
>> + u8 oldclock = 0;
>> +
>> + do {
>> + tmp = sis964_transaction_start(adap, ptl, &oldclock);
>> + if (tmp)
>> + return tmp;
>> +
>> + tmp = sis964_transaction_wait(adap, ptl);
>> + sis964_transaction_end(oldclock);
>> + } while (tmp == -EAGAIN && timeout++ < MAX_TIMEOUT);
>> +
>> + if (timeout > MAX_TIMEOUT) {
>> + dev_dbg(&adap->dev, "Bus timeout !\n");
>> + return -ETIMEDOUT;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int sis964_block_data_read(struct i2c_adapter *adap,
>> + union i2c_smbus_data *data)
>> +{
>> + int i, len = 0, tmp = 0;
>> + u8 oldclock = 0;
>> +
>> + data->block[0] = len = 0;
>> +
>> + tmp = sis964_transaction_start(adap, SIS964_BLOCK_DATA, &oldclock);
>> + if (tmp)
>> + return tmp;
>> +
>> + do {
>> + tmp = sis964_transaction_wait(adap, SIS964_BLOCK_DATA);
>> + if (tmp) {
>> + dev_dbg(&adap->dev, "Transaction wait failed\n");
>> + break;
>> + }
>> +
>> + /* if this first transaction then read byte count */
>> + if (len == 0)
>> + data->block[0] = sis964_read(SMB_COUNT);
>> +
>> + if (data->block[0] > 32)
>> + data->block[0] = 32;
>> +
>> + dev_dbg(&adap->dev, "Block data read len=0x%x\n",
>> + data->block[0]);
>> +
>> + for (i = 0; i < 8 && len < data->block[0]; i++, len++) {
>> + dev_dbg(&adap->dev, "Read i=%d len=%d\n", i, len);
>> + data->block[len+1] = sis964_read(SMB_BYTE+i);
>> + }
>> +
>> + /* clear BYTE_DONE_STS */
>> + sis964_write(SMB_STS, BYTE_DONE_STS);
>> + } while (len < data->block[0]);
>> +
>> + sis964_transaction_end(oldclock);
>> +
>> + return 0;
>> +}
>> +
>> +
>> +static int sis964_block_data_write(struct i2c_adapter *adap,
>> + union i2c_smbus_data *data)
>> +{
>> +
>> + int i, len = 0, tmp = 0;
>> + u8 oldclock = 0;
>> +
>> + len = data->block[0];
>> + if (len < 0)
>> + len = 0;
>> + else if (len > 32)
>> + len = 32;
>> +
>> + sis964_write(SMB_COUNT, len);
>> +
>> + for (i = 1; i <= len; i++) {
>> + dev_dbg(&adap->dev, "Set data 0x%02x\n", data->block[i]);
>> +
>> + /* set data */
>> + sis964_write(SMB_BYTE+(i-1)%8, data->block[i]);
>> + if (i == 8 || (len < 8 && i == len)) {
>> +
>> + /* first transaction */
>> + tmp = sis964_transaction_start(adap, SIS964_BLOCK_DATA,
>> + &oldclock);
>> + if (tmp)
>> + return tmp;
>> +
>> + } else if ((i-1)%8 == 7 || i == len) {
>> + if (i > 8) {
>> + dev_dbg(&adap->dev,
>> + "Clear smbary_sts len=%d i=%d\n", len, i);
>> +
>> + /*
>> + If this is not first transaction,
>> + we must clear sticky bit.
>> + clear BYTE_DONE-STS
>> + */
>> + sis964_write(SMB_STS, BYTE_DONE_STS);
>> + }
>> + tmp = sis964_transaction_wait(adap,
>> + SIS964_BLOCK_DATA);
>> + if (tmp) {
>> + dev_dbg(&adap->dev,
>> + "Transaction wait failed\n");
>> + break;
>> + }
>> + }
>> + }
>> +
>> + sis964_transaction_end(oldclock);
>> +
>> + return 0;
>> +}
>> +
>> +static int sis964_block_data(struct i2c_adapter *adap,
>> + union i2c_smbus_data *data, int read_write)
>> +{
>> + if (read_write == I2C_SMBUS_WRITE)
>> + return sis964_block_data_write(adap, data);
>> + else
>> + return sis964_block_data_read(adap, data);
>> +}
>> +
>> +/* Return negative errno on error. */
>> +static s32 sis964_access(struct i2c_adapter *adap, u16 addr,
>> + unsigned short flags, char read_write,
>> + u8 command, int ptl, union i2c_smbus_data *data)
>> +{
>> + int tmp = 0;
>> +
>> + switch (ptl) {
>> + case I2C_SMBUS_QUICK:
>> + sis964_write(SMB_ADDR, ((addr << 1) & SMB_ADDRESS) |
>> + (read_write & SMB_RW));
>> + ptl = SIS964_QUICK;
>> + break;
>> + case I2C_SMBUS_BYTE:
>> + sis964_write(SMB_ADDR, ((addr << 1) & SMB_ADDRESS) |
>> + (read_write & SMB_RW));
>> + if (read_write == I2C_SMBUS_WRITE)
>> + sis964_write(SMB_CMD, command);
>> + ptl = SIS964_BYTE;
>> + break;
>> + case I2C_SMBUS_BYTE_DATA:
>> + sis964_write(SMB_ADDR, ((addr << 1) & SMB_ADDRESS) |
>> + (read_write & SMB_RW));
>> + sis964_write(SMB_CMD, command);
>> + if (read_write == I2C_SMBUS_WRITE)
>> + sis964_write(SMB_BYTE, data->byte);
>> + ptl = SIS964_BYTE_DATA;
>> + break;
>> + case I2C_SMBUS_PROC_CALL:
>> + case I2C_SMBUS_WORD_DATA:
>> + sis964_write(SMB_ADDR, ((addr << 1) & SMB_ADDRESS) |
>> + (read_write & SMB_RW));
>> + sis964_write(SMB_CMD, command);
>> + if (read_write == I2C_SMBUS_WRITE) {
>> + sis964_write(SMB_BYTE, data->word & SMB_BYTE0);
>> + sis964_write(SMB_BYTE + 1,
>> + (data->word & SMB_BYTE1) >> 8);
>> + }
>> + ptl = (ptl == I2C_SMBUS_PROC_CALL ?
>> + SIS964_PCALL : SIS964_WORD_DATA);
>> + break;
>> + case I2C_SMBUS_BLOCK_DATA:
>> + sis964_write(SMB_ADDR, ((addr << 1) & SMB_ADDRESS) |
>> + (read_write & SMB_RW));
>> + sis964_write(SMB_CMD, command);
>> + ptl = SIS964_BLOCK_DATA;
>> + return sis964_block_data(adap, data, read_write);
>> + default:
>> + dev_warn(&adap->dev, "Unsupported transaction %d\n",
>> + ptl);
>> + return -EOPNOTSUPP;
>> + }
>> +
>> + tmp = sis964_transaction(adap, ptl);
>> + if (tmp)
>> + return tmp;
>> +
>> + if (ptl != SIS964_PCALL &&
>> + (read_write == I2C_SMBUS_WRITE || ptl == SIS964_QUICK)) {
>> + return 0;
>> + }
>> +
>> + switch (ptl) {
>> + case SIS964_BYTE:
>> + case SIS964_BYTE_DATA:
>> + data->byte = sis964_read(SMB_BYTE);
>> + break;
>> + case SIS964_PCALL:
>> + case SIS964_WORD_DATA:
>> + data->word = sis964_read(SMB_BYTE) +
>> + (sis964_read(SMB_BYTE + 1) << 8);
>> + break;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static u32 sis964_func(struct i2c_adapter *adapter)
>> +{
>> + /* SMBus Command protocol supported */
>> + return I2C_FUNC_SMBUS_QUICK | /* Quick command */
>> + I2C_FUNC_SMBUS_BYTE | /* Send/Receive Byte */
>> + I2C_FUNC_SMBUS_BYTE_DATA | /* Read/Write Byte Data */
>> + I2C_FUNC_SMBUS_WORD_DATA | /* Read/Write Word Data */
>> + I2C_FUNC_SMBUS_PROC_CALL | /* Process Call */
>> + I2C_FUNC_SMBUS_BLOCK_DATA; /* Read/Write Block Data */
>> +}
>> +
>> +static int __devinit sis964_setup(struct pci_dev *sis964_dev)
>> +{
>> + unsigned char b;
>> + struct pci_dev *dummy = NULL;
>> + int tmp = 0, i;
>> +
>> + /* check for supported SiS devices */
>> + for (i = 0; supported[i] > 0 && dummy == NULL; i++)
>> + dummy = pci_get_device(PCI_VENDOR_ID_SI, supported[i], dummy);
>> +
>> + if (dummy) {
>> + pci_dev_put(dummy);
>> + } else if (force) {
>> + dev_err(&sis964_dev->dev,
>> + "WARNING: Can't detect SIS964 compatible device, but "
>> + "loading because of force option enabled\n");
>> + } else {
>> + return -ENODEV;
>> + }
>> +
>> +
>> + /*
>> + Enable ACPI first , so we can accsess reg 74-75
>> + in acpi io space and read acpi base addr
>> + */
>> + if (pci_read_config_byte(sis964_dev, SIS964_BIOS_CTL_REG, &b)) {
>> + dev_err(&sis964_dev->dev, "Error: Can't read bios ctl reg\n");
>> + return -ENODEV;
>> + }
>> + /* if ACPI already enabled , do nothing */
>> + if (!(b & 0x80) &&
>> + pci_write_config_byte(sis964_dev, SIS964_BIOS_CTL_REG, b | 0x80)) {
>> + dev_err(&sis964_dev->dev, "Error: Can't enable ACPI\n");
>> + return -ENODEV;
>> + }
>> +
>> + /* Determine the ACPI base address */
>> + if (pci_read_config_word(sis964_dev, SIS964_ACPI_BASE_REG,
>> + &acpi_base)) {
>> + dev_err(&sis964_dev->dev,
>> + "Error: Can't determine ACPI base address\n");
>> + return -ENODEV;
>> + }
>> +
>> + dev_dbg(&sis964_dev->dev, "ACPI base at 0x%04x\n", acpi_base);
>> +
>> + tmp = acpi_check_region(acpi_base + SMB_STS, SIS964_SMB_IOREGION,
>> + sis964_driver.name);
>> + if (tmp) {
>> + acpi_base = 0;
>> + return -ENODEV;
>> + }
>> +
>> + /* Everything is happy, let's grab the memory and set things up. */
>> + if (!request_region(acpi_base + SMB_STS, SIS964_SMB_IOREGION,
>> + sis964_driver.name)) {
>> + dev_err(&sis964_dev->dev,
>> + "SMBus registers 0x%04x-0x%04x already in use!\n",
>> + acpi_base + SMB_STS, acpi_base + SMB_SAA);
>> + acpi_base = 0;
>> + return -ENODEV;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +
>> +static const struct i2c_algorithm smbus_algorithm = {
>> + .smbus_xfer = sis964_access,
>> + .functionality = sis964_func,
>> +};
>> +
>> +static struct i2c_adapter sis964_adapter = {
>> + .owner = THIS_MODULE,
>> + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
>> + .algo = &smbus_algorithm,
>> +};
>> +
>> +static DEFINE_PCI_DEVICE_TABLE(sis964_ids) = {
>> + { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_964) },
>> + { 0 }
>> +};
>> +
>> +MODULE_DEVICE_TABLE(pci, sis964_ids);
>> +
>> +static int __devinit sis964_probe(struct pci_dev *dev,
>> + const struct pci_device_id *id)
>> +{
>> + if (sis964_setup(dev)) {
>> + dev_err(&dev->dev,
>> + "SIS964 comp. bus not detected, module not inserted.\n");
>> + return -ENODEV;
>> + }
>> +
>> + /* set up the sysfs linkage to our parent device */
>> + sis964_adapter.dev.parent = &dev->dev;
>> +
>> + snprintf(sis964_adapter.name, sizeof(sis964_adapter.name),
>> + "SMBus SIS964 adapter at %04xh", acpi_base + SMB_STS);
>> +
>> + return i2c_add_adapter(&sis964_adapter);
>> +}
>> +
>> +static void __devexit sis964_remove(struct pci_dev *dev)
>> +{
>> + dev_dbg(&dev->dev, "sis964_remove");
>> +
>> + if (acpi_base) {
>> + i2c_del_adapter(&sis964_adapter);
>> + release_region(acpi_base + SMB_STS, SIS964_SMB_IOREGION);
>> + acpi_base = 0;
>> + }
>> +}
>> +
>> +
>> +static struct pci_driver sis964_driver = {
>> + .name = "sis964_smbus",
>> + .id_table = sis964_ids,
>> + .probe = sis964_probe,
>> + .remove = __devexit_p(sis964_remove),
>> +};
>> +
>> +module_pci_driver(sis964_driver);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_AUTHOR("Amaury Decrême <amaury.decreme@xxxxxxxxx>");
>> +MODULE_DESCRIPTION("SiS964 SMBus driver");
>> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
>> index ab741b0..0ffc982 100644
>> --- a/include/linux/pci_ids.h
>> +++ b/include/linux/pci_ids.h
>> @@ -699,6 +699,7 @@
>> #define PCI_DEVICE_ID_SI_961 0x0961
>> #define PCI_DEVICE_ID_SI_962 0x0962
>> #define PCI_DEVICE_ID_SI_963 0x0963
>> +#define PCI_DEVICE_ID_SI_964 0x0964
>
> Please read the comment at the top of this file; I don't think this
> addition qualifies as something that should be added.
>
>> #define PCI_DEVICE_ID_SI_965 0x0965
>> #define PCI_DEVICE_ID_SI_966 0x0966
>> #define PCI_DEVICE_ID_SI_968 0x0968
>> --
>> 1.7.8.6
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/